Craftsman 706650137 Owner’s Manual
OPERATOR'S MANUAL
ICRFIFTSM FIN°I
WORKBENCH
CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA.
F1495
SAFETY WARNINGS AND CAUTIONS:
• Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage.
• Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage.
• DO NOT stand on this product. You may fall which may cause personal injury.
• DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.
• Appropriately secure this product before moving it with aforklift.
• DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage.
• DO NOT alter this product in any manner. For example, do not weld external tockbars or attach electrical equipment. This may cause
product damage or personal injury.
• Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an un-level surface, which may cause
personal injury or product damage.
• BE CAREFUL when opening more than one drawer. The product may become unstable and tip, which may cause personal injury or
product damage.
• DO NOT step in the drawers. You may falt which may cause personal injury.
• The maximum weight for each drawer should be no more than 35 pounds.
• Maximum combined weight limit not to exceed 1,450 pounds. If the limit is exceeded, the product could collapse and cause personal injury
or product damage.
Tools Required:
3/8" Wrench
7/16" Wrench
11/32" Wrench
Drill
1/8" Drill bit
Screwdriver, Phillips
Screwdriver, Flathead
Separate
Bag
Hardware Included:
AA (24)
( ,
BB (36)
CC (28)
DD (6)
i
,;'/- -\
EE (24)
\\ j
FF (24)
GG (28)
HH (8)
i
Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts. Refer to Service Parts Drawing for fult listing of Service Parts.
)
F
E(14)
/
/
//
,/
/
A(2)
_D(2)
/
/
/
/
/
/
/
/
/
/
B(2)
..............G(7)
k. ,J
r
r
STEP1
AA (24)
BB (8)
EE(24)
FF (24)
Attach B to A using BB
Wrench tighten. (Do not overtighten).
B (2)
.A (2)
STEP 2
BB (28)
4
CC (28)
GG (28)
• Separate slide parts. (See drawer removal instructions).
Eu
Ed
Assemble A(2), C(4), and D(2).
A (2)
C (4)
• Attach (2) Ed to each G.
J
/
Release .............
G (7)
............GG
D (2)
/"
/,
Ed (14)
_=llll
Finger tighten. (Do not wrench tighten until step 3).
• Wrench tighten.
,J
Loading...