Craftsman 706597462, 706597461, 706597460 Owner’s Manual
OPERATOR'S MANUAL
CRRFTSMRN °
WORKBENCH
CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA.
F1483
f
SAFETY WARNINGS AND CAUTIONS:
Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage.
Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage.
• DO NOT stand on this product. You may fall which may cause personal injury.
• DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.
Appropriately secure this product before moving it with a forklift.
• DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage.
• DO NOT alter this product in any manner. For example, do not weld external Iockbars or attach electrical equipment. This may cause
product damage or personal injury.
Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an un-level surface, which may cause
personal injury or product damage.
• BE CAREFUL when opening more than one drawer. The product may become unstable and tip, which may cause personal injury or
product damage.
• DO NOT step in the drawers. You may fall which may cause personal injury.
The maximum weight for each drawer should be no more than 35 pounds.
Maximum combined weight limit not to exceed 1,450 pounds. If the limit is exceeded, the product could collapse and cause personal injury
or product damage.
k. j
Tools Required: Hardware Included:
7/16" Wrench AA (34) EE (34)
11/32" Wrench
3/8" Wrench
Drill
1/8" Drill bit
Screwdriver, Flathead BB (20) FF (34)
Screwdriver, Phillips
CO (12) _ GG (12)
DD (6)
(
Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts. Refer to Service Parts Drawing for full listing of Service Parts.
)
C(4)
G(6)
D(3)
E(2)
A(2)
B(2)
H(3)
J
f
STEP1
f
STEP 2
AA(10)
AA (16)
Attach B to A with BB.
Assemble A(2) and C(4).
BB (8)
EE (16)
FF (16)
EE (10)
FF (10)
Note: It may be easier to turn unit upside down for steps 2 and 3.
• Attach D(3).
(2)
D (3)
AA
EE
FF
AA
C (4)
Square unit and wrench tighten to 40-50 in/Ibs. (Finger
tighten and approximately 1/2 wrench turn).
EE
FF
EE
AA
Wrench tighten to 40-50 in/Ibs (finger tighten and
approximately 1/2 wrench turn).
J
J
f
STEP3
f
STEP 4
Attach E(2).
FF
EE
AA (8)
EE(8)
FF (8)
BB(12)
CC (12)
GG (12)
Separate slide parts.
Gu
Gd
Wrench tighten to 40-50 in/Ibs (finger tighten and
approximately 1/2 wrench turn).
(2)
Release:
Raise or lower
Attach (2) Gd to each H.
Release
-H (3)
Wrench tighten.
J
Loading...