Craftsman 706597412 Owner’s Manual

OPERATOR'S MANUAL

ICRFIFTSM FIN°I

WORKBENCH

CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.

Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA.

F1481

SAFETY WARNINGS AND CAUTIONS:

• Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage.

• Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage.

• DO NOT stand on this product. You may fall which may cause personal injury.

• DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.

• Appropriately secure this product before moving it with aforklift.

• DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage.

• DO NOT alter this product in any manner. For example, do not weld external tockbars or attach electrical equipment. This may cause
product damage or personal injury.

• Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an un-level surface, which may cause
personal injury or product damage.

• BE CAREFUL when opening more than one drawer. The product may become unstable and tip, which may cause personal injury or
product damage.

• DO NOT step in the drawers. You may fall which may cause personal injury.

• The maximum weight for each drawer should be no more than 35 pounds.

• Maximum combined weight limit not to exceed 1,200 pounds. If the limit is exceeded, the product could collapse and cause personal injury
or product damage.

Tools Required:

3/8" Wrench
7/16" Wrench

11/32" Wrench
Drill

1/8" Drill bit
Screwdriver, Phillips

Screwdriver, Flathead

i' ililil}

Hardware Included:

AA (34)

BB (16) FF (34)

CC (8) GG (8)

EE(34)

/

DD(6)

i

Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts. Refer to Service Parts Drawing for full listing of Service Parts.

)

//\\\\ /

J

/

/

/

/

G(4)

/

/"

//

/

/

//

A(2)

./

E(2)

J

D(3)

/

/

/

/

/

B(2)

H(2)

k. ,J

S \

,\ ./ /i EE(16)

\

A\.. fY

Attach B to A using BB.

B (2)

AA(16)

BB (8)

FF (16)

STEP2

AA(10)

FF (10)

Note: It may be easier to turn unit upside down for steps 2 and 3.

• Attach D(3).

......D (3)

Assemble A(2) and C(4).

EE

\\\

\

FF

\

AA

FF

AA

J

EE

AA

A (2) _

C (4)

Square unit and wrench tighten to 40-50 in/lbs.

tighten and approximately 1/2 wrench turn).

(Finger

Wrench tighten to 40-50 in/lbs (finger tighten and

approximately 1/2 wrench turn).

f

STEP 3

AA(8)

f

STEP 4

BB (8)

Attach E (2).

FF

EE

....'_ ) EE (8)

FF (8)

Separateslide parts.

Gu

Gd

Release:

Raise or lower

!/

/

/

/

/

cc (8)

GG (8)

/

/

/

/

Wrench tighten to 40-50 in/lbs (finger tighten and
approximately 1/2 wrench turn).

,J

Attach (2) Gd to each H.

Release

CO.

Gd (41

Wrench tighten.

H (2)

. GG

/