Craftsman 706597400 Owner’s Manual

OPERATOR'S MANUAL

I CRRFTSM R#°1

3 DRAWER SERVICE CART

Please indicate the following information from the service part drawing provided.

Model Number:

Model Description:

*Your model may vary from the one shown.

CAUTION: Read and follow all Safety Rules and Operating Instructions before
first use of this product. Retain this document for future reference.

Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA

F1602A3

;AFETY WARNINGS AND CAUTIONS:

• Appropriately secure this product before moving it with a forklift.

• Close the cover and lock the drawers and doors before moving this product. The drawers or doors could come open and make the product
unstable and tip, which may cause personal injury or product damage.

• DO NOT alter this product in any manner. For example, do not weld external lockbars or attach electrical equipment. This may cause
product damage or personal injury.

• DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.

• DO NOT stand on this product. You may fall which may cause personal injury.

• DO NOT step in the drawers. You may fall which may cause personal injury.

• DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage.

• Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an un-level surface, which may cause
personal injury or product damage.

• Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage.

• Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage.

• USE THE BRAKES when not moving this product. This will prevent the product from rolling, which may cause personal injury or product
damage.

• When moving this product, do not pull it. Push the product to prevent personal injury.

• The maximum weight for each drawer should be no more than 75 pounds.

TOOLS REQUIRED

Socket wrench
1/2" Socket
1/2" Open End Wrench
12mm Open End Wrench

HARDWARE INCLUDED

AA(38)

BB(56)

/

CC(56)

\

DD(16)

EE(2)

In a seperate
bag

Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts. Refer to Service Parts
Drawing for full listing of Service Parts.

With notch

A

4_._. ........................ L(2)

jj_N

C(4) ...

K(2)

D

\\\\.

With notch

J(2)

/

/

/

/

E

.....................G(2)

_--------

/

H(2) _

,J

f

r

STEP 1 :

AA(16)

BB(16)

/

CC(16)

Note: Remove all components from drawers before assembling

this unit.

• Assemble F, D, E, and (2) C, as shown, using (4) AA, (4) BB,
and (4) CC in each C.

• Finger tighten.

I

/

D

/

/

J

STEP 2:

AA(8)

BB(8)

/

cc(8)

• Attach (2) J, as shown, using (2) AA, (2) BB, and (2) CC in each J.

• Finger tighten.

Flanges inside

Align holes .

• Attach M, N, and remaining C to opposite end of F inthe same
manner.

• Finger tighten.

M

/

/

/

• Attach (2) K, as shown, using (2) AA, (2) BB, and (2) CC in each K.

• Finger tighten.

Flange on

K

'\

\

\

\

._top

,J