OPERATOR'S MANUAL
CRAFTSMA
GARAGE STORAGE SOLUTIONS
FLOOR CABINET - ALL SHELVES
F1379
CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
Sears, Roebuck and Co. Hoffman Estates, IL 60179, USA.
F1379A1
SAFETY WARNINGS AND CAUTIONS:
Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage.
Use adequate manpower when assembling and moving this unit. Failure to do so may cause personat injury or product damage.
DO NOT stand on this product. You may fall which may cause personal injury.
DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.
Appropriately secure this product before moving it with a forklift.
DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage.
DO NOT alter this product in any manner. This may cause product damage or personal injury.
Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an un-level surface, which may
cause personal injuryor product damage.
The maximum weight for each shelf in a door is 7 pounds.
The maximum weight allowed on each fulI width shelf of the FIoor Cabinet is lg0 pounds.
Be sure to secure the Floor Cabinet to a studded or concrete wall. Failure to do so may cause the Floor Cabinet to become unstable
and tip. This may cause personal injury or product damage.
DO NOT step on the shelves. You may fall which may cause personal injury.
J
Tools Required:
Socket Wrench
7116"Socket
318"Socket
3" Socket Extension
314"Wrench
Square
Drill
1/8" DrillBit
Pliers
Hardware Included:
AA
(11) EE
(7) FF
°°©
CC
DD (12) II
(11) GG
(4)
(2)
(2)
(2)
HH (1) JJ (8)
Call 1-80O-4MY-HOME (1-800-469-4663) for Service Parts. Refer to Service Parts Drawing for full listing of Service Parts.
i
)
f
STEP 1:
AA
f -N
STEP 2:
(4)
(6)
(2)
CC
Finger tighten.
NOTE: Ensure B is oriented correctly on each side.
CO
B
\
(6)
AA
°°©
CC
Finger tighten.
Top
(4)
(4)
AA
Top
Bottom
B
Square unit and wrench tighten atl bolts.
Square
f
STEP 3:
f
STEP 4:
NOTE: Steps 4 and 5 attach the leveler feet. Adjustments may
need to be made once the Cabinet is in the desired location.
Top
DD
DD
(6)
II
Attach II to E
Attach E to C.
(2)
C
E
Wrench tighten to 80 in/Ibs.
Top
Boffom
Boffom
f
STEP 5:
Attach D to the Unit
f
STEP 6:
DD (2)
Top
Loosely attach C with DD (2). Do NOT tighten untiI after
doors are attached.
C
D
DD
BoSom
,J