Craftsman 706591870 Owner’s Manual
OPERATOR'S MANUAL
CRRFTSMRH °
GARAGE STORAGE SOLUTIONS
8 FT. WORKBENCH BACKWALL
II CAUTION: Read and follow all Rules and Instructions before first of this
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA.
Safety Operating product.
use
F1383
f
SAFETYWARNINGSAND CAUTIONS:
Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage.
Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage.
DO NOT stand on this product. You may fall which may cause personal injury.
DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.
Appropriately secure this product before moving it with a forklift.
DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage.
DO NOT alter this product in any manner. This may cause product damage or personal injury.
Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an un-level surface, which may
cause personal injury or product damage.
Be sure the workbench is flat on the floor before installing the Workbench Backwall. Failure to do so may cause personal injury or
product damage.
The maximum weight allowed to hang on or be in any way supported from the pegboard is 65 pounds. If the limit is exceeded the
product may tip and cause personal injury or product damage.
Be sure to secure the Workbench Backwall to a studded or concrete wall. Failure to do so may cause the Workbench Backwall and
Workbench to become unstable and tip. This may cause personal injury or product damage.
59278 Workbench Backwall can only to be attached to 59276 Workbench. 59280 Workbench Backwall can only be attached to 59279
Workbench. Failure to do so may cause personal injury or product damage.
Use only the provided pegboard on Workbench Backwall.
Only hang 59273 Wall Cabinet from Workbench Backwall, DO NOT hang any other product from the Workbench Backwall. Failure to
comply may cause the Workbench Backwall and Workbench to become unstable and tip. This may cause personal injury or product
damage.
A maximum of two 59273 Wall Cabinets can be attached to the Workbench Backwall. Failure to do so may cause the Workbench
Backwall and Workbench to become unstable and tip. This may cause personal injury or product damage.
J
Tools Required:
Hardware Included:
Socket Wrench
7/16" Socket
AA
(41)
3/8" Socket
3" Socket Extension
Flathead screwdriver
Drill
1/8" Drill Bit GG
(8)
BB" (37)
\
CC
(41)
..... DD (8)
EE (4) FF (1)
Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts. Refer to Service Parts Drawing for full listing of Service Parts.
)
E
G
F
o
E
F
A (2)
B
C (2)
J
I_STEP la:
NOTE: Step la shows the Workbench Backwall attached in
the standard position. See Step 1b for attachment in the
alternate, lower position.
_STEP lb: -_
(16)
CC
Attach A (2) and B.
(18)
(18)
(18)
(16)
CC
Attach A (2) and B.
A
A
(16)
B
CC BB
Finger tighten.
AA
CC BB
AA
Finger tighten.
J
4
_STEP 2:
f
STEP 3:
(6)
(6)
(6)
(6)
CC
Attach C using the holes in the bottom of C.
BB
CC
(6)
AA
C
CC
Attach C and D using the holes in the top of C.
BB
CC
(6)
AA
D
k.
Finger tighten.
Finger tighten.
,J
,J
Loading...