Craftsman 706591820 Owner’s Manual
OPERATOR'S MANUAL
GARAGE STORAGE SOLUTIONS
5 FT. WORKBENCH BACKWALL
II CAUTION: Read and follow all Rules and Instructions before first of this
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA F1382A2
Safety Operating
use
product.
f
SAFETY WARNINGS AND CAUTIONS:
• Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage.
• Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage.
• DO NOT stand on this product. You may fall which may cause personal injury.
• DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.
• Appropriately secure this product before moving it with a forklift.
• DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage.
• DO NOT alter this product in any manner. This may cause product damage or personal injury.
Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an un-level surface, which may cause
personal injury or product damage.
Be sure the workbench is flat on the floor before installing the Workbench Backwall. Failure to do so may cause personal injury or product
damage.
The maximum weight allowed to hang on or be in any way supported from the pegboard is 65 pounds. If the limit is exceeded the product
may tip and cause personal injury or product damage.
Be sure to secure the Workbench Backwall to a studded or concrete wall. Failure to do so may cause the Workbench Backwall and
Workbench to become unstable and tip. This may cause personal injury or product damage.
59187 Workbench Backwall can only to be attached to 59186 Workbench. 59182 Workbench Backwall can only be attached to 59181
Workbench. Failure to do so may cause personal injury or product damage.
Use only the provided pegboard on Workbench Backwall.
• Only hang CRAFTSMAN Garage Storage Wall Cabinet from Workbench Backwall, DO NOT hang any other product from the Workbench
Backwall. Failure to comply may cause the Workbench Backwall and Workbench to become unstable and tip. This may cause personal injury
or product damage.
• A maximum of two CRAFTSMAN Garage Storage Wall Cabinets can be attached to the Workbench Backwall. Failure to do so may cause the
Workbench Backwall and Workbench to become unstable and tip. This may cause personal injury or product damage.
Tools Required:
Socket wrench
1/4" Socket
3/8" Socket
7/16" Socket
3" Socket extension
Screwdriver, Flathead
1/8" Drill bit
Drill
©
Hardware Included
AA(28)
EE(2)
BB(26)
CC(28)
FF(1)
DD(5)
GG(8)
Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts. Refer to Service Parts
Drawing for full listing of Service Parts.
E
D(2)
iiiiiiiii_::_°
iii:: °
B (2)
A (2)
J
f
STEP 1 :
OPTION 1
f
STEP 1 :
OPTION 2
AA(10)
AA(12)
BB(10)
BB(12)
©
Note: Option 1 shows the Workbench Backwall attached in the
standard position. See option (2) for attachment in the
alternate, lower position.
• Attach (2) A to workbench, as shown, using (12) AA, (12)
BB, and (12) CC.
• Finger tighten.
CC(12)
©
• Attach (2)A to workbench, as shown, using (10)AA, (10)
BB, and (10) CC.
• Finger tighten.
BB
CC(10)
BB
, E
II E
D !
, E
o
II I
.... ii
View from back
D D
P
, ol
D
D ol
View from back
,J
f-
STEP 2:
f
STEP 3:
AA(4)
BB(4)
©
• Attach (1) B to (2) A, as shown, using (4) AA, (4) BB, and (4) CC.
• Finger tighten.
Use bottom
cc(4)
BB
AA
AA(5)
BB(5)
©
• Install B and C, as shown, using (5) AA, (5) BB, and (5) CC.
• Finger tighten.
Use top-
holes in B.
cc(5)
J ,J
Loading...