Craftsman 706591810 Owner’s Manual
OPERATOR'S MANUAL
CRRFTSMRH °
GARAGE STORAGE SOLUTIONS
5 FT. WORKBENCH
II CAUTION: Read and follow all Rules and Instructions before first of this
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA.
F1380
Safety Operating
use
product.
f
SAFETY WARNINGS AND CAUTIONS:
Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage.
Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage.
• DO NOT stand on this product. You may fall which may cause personal injury.
DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.
Appropriately secure this product before moving it with a forklift.
DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage.
• DO NOT alter this product in any manner. This may cause product damage or personal injury.
Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an un-level surface, which may
cause personal injury or product damage.
Maximum combined weight limit not to exceed 2,500 pounds. If the limit is exceeded, the product could collapse and cause personal
injury or product damage.
J
Tools Required:
Socket Wrench
7/16" Socket
3/8" Socket
3/4" Wrench
Drill
1/8" Drill Bit
Tape Measure
FF
GG
Hardware Included:
(8)
(4)
AA (4)
(4)
CC
(4)
DD (18)
EE
(8)
Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts. Refer to Service Parts Drawing for full listing of Service Parts.
A
iJ
STEP 2:
1:
Place assembly on D flush to the back, with a 3" overhang
on each side. Note: Coated side of D should be face
down.
DD (7)
(4)
>
D
(4)
CC
(4)
Back
Bottom A
B
;i'"
Mark (7) hole locations for attachment.
Move assembly for access and drill 1/8" pilot holes, 1/2"
deep.
Replace assembly and attach. DO NOT overtighten
screws.
DD
D
Wrench tighten.
J
,J
Loading...