Craftsman 70629216 Owner’s Manual

LOCKERS

LOCPlease indicate the following

information from the service
part drawing provided.

SAFETY WARNINGS AND CAUTIONS:

• DO NOT stand on this product. You may fall which may cause personal injury.

• WEAR SAFETY GLASSES when removing or repositioning the slides. The tool
could slip which may cause personal injury.

• BE CAREFUL when opening more than one drawer. The product may become
unstable and tip, which may cause personal injury or product damage.

• DO NOT mount this product on a truck bed or any other moving object. This may
cause personal injury or product damage.

• DO NOT step in the drawers. You may fall which may cause personal injury.
Appropriately secure this product before moving it with a forklift.

• DO NOT tow with power equipment. The product could tip, which may cause
personal injury or product damage.

• DONOT alter this product in any manner. For example, do not weld external
Iockbars or attach electrical equipment. This may cause product damage or
personal injury.

• A heavy duty side cabinet must be used on an equally heavy duty cart.

• Keep the product on level surfaces. The product may become unstable and tip if
stored or moved on an un-level surface, which may cause personal injury or

product damage.

• Lock the door before moving this product. The or door could come open and make
the product unstable and tip, which may cause personal injury or product damage.

• The maximum weight for each drawer should be no more than 100 pounds.

• The maximum weight for side cabinet should be no more than 400 pounds.

Model Number :

Model Description :

CAUTION:

Read and follow all
Safety Rules and Operating Instructions before first use

of this product. Retain this document for future reference.

Sears, Roebuck and Co., Hoffman Estates, IL60179 USA

Call 1-800-366-7278 for Service Parts

Refer to Service Parts Drawing for full listing of Service Parts

HARDWARE:

'_" _/'_:_1 3/8-16 x 3/4 PAN HEAD SCREW

_%_ _:!/'I_,_'_:J_ 14-10 x 543 HEX SCREW

F1850 2

BRACKET INSTALLATION:
NOTE: The hanging brackets and

bumpers can be mounted to either side
of the cabinet.

• Attach the adhesive-backed rubber
bumpers at the bottom corners of the

side cabinet.

• Attach the bracket to the side of the side
cabinet using two 3/8-16 x 3/4" pan

head screws.

ATTACHING SIDE CABINET TO UNIT:
Before installing the side cabinet,

remove the handle by following the
side handle instructions. The chest

must be moved for side cabinet
attachment. Reattach chest to cabinet
before moving the unit.

• Using adequate help hang the side
cabinet on the unit.

• Place the bottom bracket over the the
bottom flange of the unit and attach to

the underside of the side cabinet using
3/8-16 x 3/4" hex screws.

REMOVING AND INSTALLING SLIDES:
NOTE: To remove the slide from the
unit, first remove the drawer.

• To remove the slide from the unit, first
remove the drawer (follow the procedure
above). Lift and hold the spring retainer,

and push the slide toward the rear of the
unit. The slide may now be removed.

/

z Spring

Retainer

REVERSIBLE DOOR MOUNTING
INSTRUCTIONS:

TO MOUNT DOOR ON OPPOSITE SIDE:

• Remove door and hinge assembly by
removing screws on hinge.

• Turn upside down and refit to opposite
side using the same screws.

NOTE: Adjust door to assure optimum
performance prior to wrench tightening

screws.

B_8/',CKET

.........t_C£,_i '_',' ( 2}

:3/8 6 x 3/z ='

REMOVING AND INSTALLING
DRAWE RS:

• Empty the drawer.

• Fully extend the drawer.

• Lift the release lever on the right side,
while depressing the lever on the left
side and pull the drawer out to remove.

• To reinstall, carefully align the slides and
slowly push the drawer into the unit until

the drawer stops.

Release Lever
Left

Release Lever

Right

• To reinstall the slide, place the slide in
the appropriate position in the unit. Pull
it toward the front of the unit until the

spring retainer snaps into position and
secures the slide.

• For smooth operation, make sure the
drawers are matched wtih their original

slides.

• Lubricate the slides, (twice yearly).

• Lubricate lock with graphite, (yearly).

• Periodically the drawer fronts, drawer
trim, and other surfaces should be

cleaned with a mild detergent and water.

• Auto wax wilt preserve the storage unit's
luster finish. Apply the wax as to a car.

The wax wilt also help protect the unit
against scratches.

• Grease and oil can be removed with
most standard cleaning fluids. For

safety, use a nonflammable cleaning
fluid.

3 4