Craftsman 706153410 Owner’s Manual
OPERATOR'S MANUAL
(RRFT$1VlRN°
iPROFESSiONAL i
GARAGE STORAGE SOLUTIONS
FLOOR CABINET- ALL SHELVES
°::i!i!i!::
il
CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA F1379A3
SAFETY WARNINGS AND CAUTIONS:
Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage.
Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage.
DO NOT stand on this product. You may fall which may cause personal injury.
DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.
Appropriately secure this product before moving it with a forklift.
DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage.
DO NOT alter this product in any manner. This may cause product damage or personal injury.
Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an un-level surface, which may
cause personal injury or product damage.
The maximum weight for each shelf in a door is 7 pounds.
The maximum weight allowed on each half shelf of the Floor Cabinet is 50 pounds.
The maximum weight allowed on each full width shelf of the Floor Cabinet is 100 pounds.
Be sure to secure the Floor Cabinet to a studded or concrete wall. Failure to do so may cause the Floor Cabinet to become unstable
and tip. This may cause personal injury or product damage.
DO NOT step on the shelves. You may fall which may cause personal injury.
Tools Required
7/16" Socket
3/8" Socket AA(11 )
3" Socket Extension
Square
Drill
1/8" Drill Bit BB(7)
Pliers
Hardware Included
CC(11)
,?
DD(4)
EE(8)
GG(4)
Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts. Refer to Service Parts
Drawing for full listing of Service Parts.
B
C
/
/
/
/
o o o
A(2)
r
STEP 1 :
STEP 2:
AA(6)
AA(4)
BB(6)
CC(4)
cc(6)
• Install A(2) as shown, using AA(4) and CC(4).
• Finger tighten.
Note: Ensure A is oriented correctly on each side.
CC(4)
/A(2)
• Install AA(6) with BB(6) and CC(6).
• Finger tighten.
AA(4)
AA(6)
Square unit and wrench tighten all bolts.
,J
r
STEP 3:
f
STEP 4:
DD(4)
EE(8)
• Attach DD to flange on left side door at the top and bottom.
• Attach DD to unit behind left side door at the top and bottom.
Apply to unit
Apply to
flange\,
/
• Attach EE to front and back of slots in the door.
EE
J
,J
Loading...