Craftsman 610246262 Owner’s Manual

EASY DUMP CART

Model 610.246262 User Guide

16 cu. ft. heaped capacity. 1250 pound weight capacity.

Removable tail gate.

If you read and follow these instructions, this product can be assembled in 55 minutes or less. If you don't read these instructions, assembly may take over two hours!

TO MINIMIZE ASSEMBLY TIME:

• DO NOT tighten fasteners until instructed to do so.

• Illustrated items shaded red are the parts being assembled in that instruction section.

• Assemble unit on cardboard box to avoid scratches or damage to parts.

For best results, two people are required for assembly.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Visit our Craftsman website: www.sears.com/craftsman

If there are any missing parts, or if you have any questions on assembly, operation, maintenance

or safety, please call

1-800-652-2321

All fasteners are readily

available for purchase at

your nearest Sears store

or local hardware store.

610.246262 Rev E 3/06

Hardware Bag Contents

REF. NO.

23 25

AMT.

5O 5O

BAG 2.

DESCRI PTIO N 5/16"-18 keps nut

5/16"-18 x 3/4" pan head bolt

TOOLS SUGGESTED FOR ASSEMBLY

Large blade screwdriver

1/2" wrench and/or socket

pliers cordless drill

SAFETY INSTRUCTIONS

Never exceed load capacity of cart - 1250 Ibs.

When operating on slopes, use lowest ground speed

and limit load to 200 Ibs. Do not carry passengers in cart.

Do not use this cart on public roads. Operate up and down slopes, never across the face of slopes.

Avoid sudden turns or maneuvers.

MAINTENANCE & STORAGE

REF. NO.

18 19

30 31

AMT.

Periodically check all nuts and bolts for tightness. Check tire pressure regularly. Grease wheels using zerk fitting at axle for longer life. Keep cart clean and dry to prevent rust and corrosion. Store inside a clean, dry area when not in use.

BAG 1.

DESCRIPTION

2 4

1 3/8" axle spacer 3/4" axle washer thin hitch pin

hairpin cotter #7

FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m.E.S.T.

Page 2.

OPERATION

With cart attached to tractor, remove tailgate, and then

pullback on latch bar. Cart body will tilt backwards,

dumping contents. Once empty, replace tailgate, then

pull cart body down until it latches. Make sure to use the hairpin cotter with the hitch pin

when attaching to the tractor.

Follow all operating instructions in tractors user guide.

Carton Contents

REF. NO.

1 2 3 4

5 6 7 8

AMT.

1 1 1

1 1 1 1

FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m.E.S.T.

DESCRIPTION riqht body half

left body half

front qate corner

rear support bar tail qate qate retainer riqht qate retainer left

REF. NO.

Page 3.

11 12 17 21

AMT.

1 1 1 1

1 1

DESCRIPTION

front support

axle holder hitch assembly

axle

wheel #3

assembly manual hardware baq

+ 7 hidden pages