Craftsman 610.24610 User Manual

User Instructions
ICR FTSM
TRACTOR LIFT
Model Number 610.24610
Provides access to mower deck for easy cleaning and service
Fits all 1985 through current models of CRAFTSMAN front engine tractors
and zero turn mowers
Adjustable arms for greater versatility
®
Patent Pending
Extra heavy duty steel construction If you read and follow these instructions, this product can be
assembled in approximately 20 minutes
Assemble unit on cardboard to avoid scratches or damage to parts
Can easily be assembled by one person
All fasteners for this Tractor Lift can be purchased at Sears or any
hardware store
If there are any missing
parts, or if you have any questions on assembly, operation, maintenance
or safety, please call
1-800-652-2321
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit our Craftsman website: www.sears.com/craftsman
Made inChina 310041-REV C 1/09
WARNINGS
SAFETY INSTRUCTIONS
Always check to ensure stabilizers are properly in place and stabilizer latches are engaged before starting any work on tractor.
Read and understand all safety and operating instructions before using the tractor lift. Never allow anyone unfamiliar
with these instructions to use the tractor lift.
Read and understand all safety and operating instructions provided by the tractor's manufacturer before using tractor lift.
Never lay under the tractor or mowing deck.
When using lift, keep all bystanders, including children, away.
This tractor lift must be only used for lifting and lowering to and from a level and stable surface.
Never use in wet conditions.
Do not attempt to lift the front and back of the tractor at the same
time.
Do not use tractor lift as an automotive lift, or for any other use for
which it is not intended or designed.
If tractor lift is bowing while lifting or lowering your tractor, which indicates an overload condition, remove the tractor immediately.
Be sure to read and follow all safety instructions and
warnings. Failure to follow these instructions may result in
damage to the product and/or serious personal injury.
Danger of serious personal injury exists. Serious personal injury can occur when using a lifting device.
Never attempt to ride any vehicle up or down the tractor lift. Do not climb onto tractor while tractor is in the elevated position.
When working on the front of the tractor always place wheel
chocks in back of the rear wheels/tires.
Always raise and lower tractor lift in a controlled fashion; do not
allow the tractor to drop too quickly, damage could occur.
Make sure lifting arms are aligned and set to the proper distance apart so that the equipment being loaded is well balanced on the lift.
Do not remove warning decals from product. Before each use, always check for any worn, loose, or
damaged parts on the tractor lift. If any damage is present, DO NOT USE THE TRACTOR LIFT.
Periodically check the fasteners to make sure they are still
tight and in place.
Do not attempt to lift or lower any power equipment while motor is running.
Never engage blades while using tractor lift.
Always disconnect spark plug wire from tractor before beginning any work on tractor.
Do not exceed the rated capacity of the tractor lift - 275 Ibs.
Failure to follow these warnings may result in property damage and/or serious bodily injury.
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m.- 5 p.m.E.S.T.
Keep lift surface clean by occasionally cleaning with water and any mild detergent.
Do not add to or try to modify the tractor lift in any way.
Any modifications will void any warranties.
Failure to abide by the warnings and read the safety instructions may result in loss of load, damage to lift and/or property, serious personal
and/or fatal injury.
Page 2.
Carton Contents .........................................................................
10
REF NO
1 2 3
4
QTY
1 1
1
2
PART NUMBER
510016 510023 510034
51008
DESCRIPTION
Frame Assembly Handle, Top
Handle, Bottom 10 Lift Tube Assembly 11
OPERATION
Tractor Lift can be used out of the box on all Craftsman tractors with bumpers or brush guards. Tractor Lift mounting hardware is
provided if your tractor does not have a bumper or brush guard.
TOOLS REQUIRED FOR ASSEMBLY
9/16" Wrench and/or Socket Adjustable wrench
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m.- 5 p.m.E.S.T.
REF NO
6
QTY
1
2
1 1
MAINTENANCE
Store unit in a clean dry place. Recommended tire pressure - 30 PSI. Before each use:
Always check tire pressure.
Always inspect unit for damage.
Always check fasteners for tightness.
Page 3.
PART NUMBER
510052 410133 310037 310041
DESCRIPTION
Bar, Lifting Bracket, Tractor
Hardware Bag
Assembly Manual
Hardware Contents
¢.....--
L..._
29
t'--
L___
24 23 25
28
(O
)
REF NO
23 24
25 26
QT'r"
3
5
4
22
PARTNUMBER
310051 310072
310073 310062 300082 310061
27 31 32 26
DESCRIPTION
318"-1 6 x 2-3/4" Hex Bolt 3/8" Split Lock Washer
3/8" USS Flat Washer 3/8"-1 6 He;,( Nut
Hairpin Cotter
3/8"-1 6 ['¢;/Ioc Hex Nut
FOR MISSING PARTS, Ca111-800-652-2321, Monday-Friday, 8 a.m.-5 p.m.E.S.T.
REF NO QTY PARTNUMBER
28 310054 29 8 310055
31 1 310063 32 1 310074
Page 4.
318"-16 x 1-1/2" Self-th read Bolt 318"-16 x 1-114" Hex Bolt
1t2"-13 Hex Nut 112" USS Flat Washer
Loading...
+ 7 hidden pages