Page 1
PLASTIC UTILITY
DUMP CART
Model 610.24489
• 10 cu. ft. heaped capacity
• Durable, polyethelene body
• Easy dump
If you read and follow these instructions, this product
can be assembled in 55 minutes or less. If you don't read
these instructions, assembly may take over two hours!
TO MINIMIZE ASSEMBLY TIME:
DO NOT tighten fasteners until instructed to do so.
Illustrated items shaded red are the parts being
assembled in that instruction section.
If there are any missing
parts, or if you have any
questions on assembly,
operation, maintenance
or safety, please call
1-800-652-2321
Assemble unit on cardboard box to avoid scratches
or damage to parts.
For best results, two people are required for assembly.
All fasteners are readily
available for purchase at
your nearest Sears store
or local hardware store.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A
Visit our Craftsman website: www.sears.com/craftsman (c) 01/2009 6000154-REV A 01/09
Page 2
Bolt Bag Contents
o ’
13
15
18
REF. NO. PART NO. AMT. DESCRIPTION
18
19
20
21 3000537 2 5/16"-18 X 1" PAN HEAD BOLT
300054 32 5/16"-18 X 3/4" PAN HEAD BOLT
3000711 12 5/16" USS FLAT WASHER
300062 34
19
5/16"-18 KEPS NUT
20
TOOLS SUGGESTED FOR ASSEMBLY
Large blade screwdriver
1/2" wrench and/or socket
cordless drill
SAFETY INSTRUCTIONS
21
17
REF. NO. PART NO. AMT. DESCRIPTION
13 300083
14 300084
15 300072 4 3/4" AXLE WASHER
16 6000105
17
6000106
FOR MISSING PARTS, Call 1-
1 HITCH PIN
HAIRPIN COTTER PIN
3
2 SPACER, LONG
2 SPACER, SHORT
16
Never exceed load capacity of cart - 325 lbs.
When operating on slopes, use lowest ground speed and
limit load to 200 lbs.
Do not carry passengers in cart.
Do not use this cart on public roads.
Operate up and down slopes, never across the face of slopes.
Avoid sudden turns or maneuvers.
MAINTENANCE & STORAGE
Periodically check all nuts and bolts for tightness.
Check tire pressure regularly.
Grease wheels at axle for longer life.
Keep cart clean and dry to prevent rust and corrosion.
Store inside a clean, dry area when not in use.
OPERATION
With cart attached to tractor pull back on latch bar.
Cart body will tilt backwards, dumping contents.
Once empty, pull cart body down until it latches.
Make sure to use the hairpin cotter with the hitch pin when
attaching to the tractor.
Follow all operating instructions in tractors owners manual.
800-652-2321, Monday
Page 2.
Friday, 8 a.m. - 5 p.m. E.S.T.
Page 3
Carton Contents
REF. NO. PART NO. AMT. DESCRIPTION REF. NO. PART NO. AMT. DESCRIPTION
1 6000026 1 CART BODY 7 6000030 1 AXLE
2 6000022 1 FRONT SUPPORT BRACE 8 6000020 1 DRAWBAR ASSEMBLY
3 6000025 1 FRONT SUPPORT 9 6000027 2 WHEELS
4 6000024 2 LATCH ANGLE 10 6000023 1 ANGULAR SUPPORT
5 6000028 2 AXLE SUPPORT 11 6000154 1 ASSEMBLY MANUAL
6 6000029 4
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m.
AXLE HOLDER
12 6000108 1 BOLT BAG
5 p.m. E.S.T.
Page 3.
Page 4
Front Support Sub-Assembly
step 1. Attach LATCH ANGLE (4) to FRONT SUPPORT (3).
Step 2. Assemble FRONT SUPPORT BRACE (2) to FRONT SUPPORT (3).
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 4.
Page 5
Axle Support Sub-Assembly
step 3. Loosely bolt together two AXLE HOLDERS (6) as shown
Bolts will be tightened after axle is installed.
Step 4. Repeat for other two plates.
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 5.
Page 6
Undercarriage Assembly
step 5. Secure Front Support Assembly (Page 4) and AXLE SUPPORTS (5) to CART BODY (1) as shown, making sure to use
flat washers (19) under the heads of ALL bolts (18 & 21) going through CART BODY (1).
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 6.
Page 7
Axle Holder Assembly
step 6. Add AXLE HOLDER ASSEMBLIES (Page 5) to AXLE SUPPORTS with bolts (18) and keps nuts (20) as shown.
AXLE HOLDER ASSEMBLY
THESE BOLTS WILL BE
TIGHTENED AFTER AXLE
m
IS INSTALLED.
TIGHTEN THESE EIGHT
BOLTS ONLY AT THIS TIME.
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 7.
Page 8
Hitch Assembly
step 7. Secure LATCH ANGLE (4) to DRAWBAR ASSEMBLY (8) with bolts (18) and kep nuts (20).
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 8.
Page 9
Add Ax!Drawbar & Wheels
step 8. Slide AXLE (7) through AXLE HOLDER, large SPACER (16),
DRAWBAR ASSEMBLY (8), large SPACER (16) and other AXLE HOLDER.
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 9.
Page 10
Service Parts List - 610.24489
REF. PART NO. AMT. DESCRIPTION
1
6000026
1 CART BODY
2 6000022 1 FRONT SUPPORT BRACE
3 6000025
1 FRONT SUPPORT
4 6000024 2 LATCH ANGLE
5 6000028
6 6000029
7
8A
9
6000030
6000019
6000027 2
10 6000023
13 300083
14 300084
15
300072 4 3/4" AXLE WASHER
16 6000105
17
18
6000106
300054 32
2 AXLE SUPPORT
4 AXLE HOLDER
1 AXLE
1 DRAWBAR
WHEELS
1 ANGULAR SUPPORT
1
HITCH PIN
3
HAIRPIN COTTER PIN
2 SPACER. LONG
2 SPACER, SHORT
5/16"-1 X 3/4" PAN HEAD BOLT
19
20
3000711 12 5/16" USS FLAT WASHER
300062 34
21 3000537 2
22
23
24
401111
401121 1 HITCH BRACKET
300131
25 300053
26 300061
27 300052 1
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m.
Page 10.
5/16"-18 KEPS NUT
5/16"-18 X 1" PAN HEAD BOLT
1 LATCH POST
1
LATCH SPRING
1
3/8"-16 X 4" HEX BOLT
2 3/8"-16 C-LOCK NUT
3/8"-16 X 3/4" HEX HEAD BOLT
5 p.m. E.S.T.
Page 11
CRAFTSMAN THREE YEAR LIMITED WARRANTY
If this Craftsman product fails due to a manufacturer's defect within three years from the date of purchase, return it to
any Sears store or other Craftsman outlet in the United States for free replacement.
This warranty does not provide product replacement due to wearing off or fading of product paint, or wearing out or
failure of product tires or wheels.
This warranty is void if this product is ever used for commercial or rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179.
PRODUCT RECORD
In the space below record the model number and
purchase date of your cart. The model number can
be found on the front cover of the user guide.
Model Number
Purchase Date
Keep this booklet and your Sears receipt in a safe
place for future reference.
ORDERING INFORMATION
After the three year warranty period all parts may
be ordered by calling Sears Service at
1-800-4MY-HOME (1-800-469-4663).
When ordering repair parts, always give the
following information:
• Product -_____________________________.
• Model Number-
• Part Number-*
• Part Description - *
'Found on the repair part list. Reference page 10.
______________________
_______________________
___________________
.
.
.
Loading...