Craftsman 610.24411 Operator's Manual
Operators Manual
Easy on & off tractor
200-pound load capacity
Flips up when not in use
No tools required for removal
Load n' Go
Tractor Utility Deck
tVlodel No. 610,244tl
If there are any missing parts please call
1-800-652-2321,
All fasteners are readily available through any
hardware store,
Any questions on assembly, missing parts,
operation, maintenance or safety, please call
the above toll free number.
CAUTION:
Before using this product, read this
Manual and follow aJl it's Safety Rules
and Operating Instructions.
Safety
Assembly
Operation
Maintenance
Parts
Sears, Roebuck a_qdCo,, Hoffman Estates, _L60179 U,S,A.
Visit our Craftsman website: www.sears.com/craftsman
244.11 -REV,-A
10/02
II_lti_lill iilJiililill l it,t1 li_
Safety Instructions
• Tools Required for Assembly
• Maintenance / Storage
• Operation
• Assembly Instructions
• Parts
• Warranty information
i_legllgMOillllllmW__-q_
• Always inspect the utility deck before every
use to ensure proper assembly and no
damage is present.
• Periodically check all nuts and bolts for
tightness.
• Keep utility deck clean and dry to prevent
rust and corrosion.
• Store inside a clean, dry area when not in
Use.
I II
_.11.t11 I111 P,li'!llh'il[li I [I]l,i _
ll=l=Eliil]l
• Read this Manual before assembling utility
deck.
• Never stand, sit or carry passengers on the.
utility deck.
• Never exceed load capacity of - 200 Ibs.
• Limit load to 100 Ibs. and use lowest ground
speed when operating on slopes.
Operate up and down slopes, never across
the face of slopes. Avoid sudden turns or
maneuvers.
• Never operate the tractor while loading or
unloading the utility deck.
• Utility deck flips up when not in use allowing
the use of other attachments.
• Make sure you use t_'e bolt, wing nut, and
safety pin when attaching to the Tractor,
• Follow all operating instructions in your
Tractors Owners manual.
• Never operate the tractor without properly
securing the load.
• Never exceed the tractor hitch or transmission
draw capacity.
• Always engage tractor clutch slowly and
smoothly.
• 1!2" Wrench and / or Socket.
• 9116" Wrench and / or Socket.
a 114"Hexkey
• Vise Grip Wrench and / or adjustable
wrench.
V$'{_'!l I LllIII I'11 O!111 It gill l |l_l II
• Before beginning to assemble, layout and
identify all parts and hardware.
• Read all assembly instructions, pages 4 - 9
before beginning to assemble unit.
• Some assembly may require two people.
II II IIIII I | IIIIII I I
I CAUTION: BEFORE USE COMPLETELY READ THE OWNERS MANUAL FOR I
PROPER ASSEMBLY AND USE; FAILURE TO FOLLOW SAFETY PRECAUTIONS
MAY RESULT IN SERIOUS INJURY.
I .. I II III IIII ii ii ii iiii
For mlr=slng parts, call 1-800-652-2321, Mon.- FrL, 8 a,m.. 5 p.m. ES,T.
Page 2,
3
2
Ref. No.
1
2
3
4
_8
Qty.
1
2
2
• 1
Description
Deck
Deck Support Arms
Side Plate
Tractor Mount Plate
Shoulder Bolt Plate
I
=11
Carton Contents
Ref. No.
19
BB
INST
DECAL
2
1
1
1
. ,,i
Description
Bungle Straps
Bolt Bag - not shown
Assembly Manual" not shown
Warning Decal- not shown
9
5
13
5 8
5 '4
7 2
8
9 2
10 2
11 £
7
12
6
16 14 17 15
_mllu •
Bolt Bag Contents
Ref. No.
12
13
14
15
16
17
Description
5/16" x 3/4" hex head bolt
5]16;;' flat washer
3/8" x 1" hex head bolt
5/1'6" keps nut
5/16" x2 1/2" hex head'bolt
5/16" lock nut
5/16" x 3/4" clevis pin
_3ty,
2
1
1
2
1
4
Description
hair pin
1/2" x 1 1/2" hexboit with hole
1/2" wing nut,
112" shoulder bolt 3/8-16 th'read
1/2" split lock washer
3/8" lock nut
For mlssing part5. Call 1.800-652-2321. Man. - Fri.,8 o.m., 5 !o.m, E.$.T,
Page 3.
Side
Tractor mountin
.5/16" x 3/4" hex bolt
Figure 1
1. Attach side plates 3 ), finger tight to tractor mounting plate ( 4 }, as shown, with four
5/16' x3/4" hex head bolts ( 5 ), and four keps nuts (8).
2. Bolts will be tightened in a later step after attached to tractor.
THIS STEP REQUIRES
( 4 ) - 5/16" x 3/4" hex head bolt
( 4 ) - 5/16" keps nut
Formissing parts, call 1-80D-652-232h Man, - Fri,,8 a.m, - 5 p.m. E,S,T.
Page 4,
Loading...