Craftsman 610.243551 User Manual
Operators Manual
12 Cu. Ft, Heaped
1,000-Pound Capacity
Removable Tail Gate
EASY DUMP CART
Model No. 610.243551
If there are any missing parts please call
1-800-652-2321.
All fasteners are readily available through any
hardware store.
Any questions on assembly, missing parts,
operation, maintenance or safety, please call
the above toll free number.
CAUTION:
Before using this product, read this
Manual and follow all it's Safety Rules
and Operating Instructions.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit our Craftsman website: www.sears.com/craftsmen
• Safety
• Assembly
• Operation
• Maintenance
• Parts
243551-REV-D
9/O2
• Safety Instructions
• Tools Required for Assembly
• Maintenance / Storage
• Operation
• Assembly instructions
• Parts
• Warranty Information
• Perio_:Scally check all nuts and botts for
tightness.
• Check tires pressure regularly. 30 p.s.i, is
recommended.
• Grease Wheels at Axle for longer life.
• Keep Cart clean and dry to prevent rust
and corrosion.
= Store inside a clean, dry area when not in
use.
• Read this Manual before assembling
Cart.
• Never exceed load capacity of Cart -
1000 Ibs.
• When operating on slopes, use lowest
ground speed and limit load to 200 Ibs.
• Do not carry passengers in Cart.
• Do not use this Cart on public roads.
• Operate up and down slopes, never
across the face of slopes,
• Avoid sudden turns or maneuvers.
liUm;] ih,-,ii--,ialel_Jn.-,iIqldll:ig] m_n mllali I
• 7/16" Wrench and / or Socket,
• V="Wrench and / or Socket.
• 9/16" Wrench and / or Socket.
• Large Blade Head Screw Driver,
• Vise Grip Wrench.
• With Cart Body attached to tractor,
remove Tailgate, and then pull up on
Cart Latch, Cart Body will tilt backwards,
dumping contents, Once empty, replace
Tailgate then pull Cart Body down until it
latches.
• Make sure you use the Safety Pin with
the Hitch Pin when attaching to the
Tractor.
• Follow all operating instructions in your
Tractors Owners manual.
• Before beginning to assemble, layout
and identify all parts and hardware.
• Read all assembly instructions, pages
3 - 9 before beginning to assemble Cart.
• Some assembly may require two people.
FOR MISSING PARTS, Call 1-800-852-2321
Mon.- FRY,,O a.m. - 5p.m. E,S. T.
Page 2
J
CARTON CONTENTS
14
10
33
21
8A
REF.NO.
1
2
3
4
5
7A
8A
9
10
3
QTY
1
,,,=,, ,, ,
1
1
2
1
1
1
1
1
DESCRIPTION
Right Body Half
Left Body Half
Front Gate
Comer
"Rear Support Bar '"
Gate Retainer- Right
Gate Retainer- Left
Front Support
Brace
REF,NO.
11
12
13
14
16
17
21
33
34
BB
QTY. DESCRIPTION
,,,,,
1 Axle Holder
1 Drawbar
2 Latch Post
1 Latch
1 Hitch Bracket
1 A)de
2 Wheel
1 Tail Gate
1 Owners Manua"l"not"shown
1 Bolt Bag - Not Shown
FOR MISSING PARTS, Ca/I 1-800-852-2321
Mon - Ft'/, 8 a.m. - 5 p, m. E,S. T.
Page 3
BAG 1
BAG 2
@
BAG
26 25
23 22
@ @
24 23W 23N
19
29
28 27W
22LN 28LN
15
'_ ,I I
32
27N
BOLT BAG CONTENTS
REF.NO.
15
18
19
2o
22
22LN
23
23W
23N
24
25
QTY.
2
4
2
2
2
12
42
42
4
22
FOR MISSING PARTS, Call 1-800-652-2321, Mon- Fr_ 8 a.m. - 5p.m, E.S. T.
DESCRIPTION
1
Latch Spring
PVC Spacer
Axle Washer 3/4"
Hub Cap
Bolt 1/4" x 3/4" Hex Head
Lock Nut 1/4"
Bolt 5/16" x 1/2" Pan Head
Split Lock Washer 5/16"
Hex Nut 5/16"
Bolt 5/16" x 1/2" Hex Head
Bolt 5/16 "x3/4" Pan Head
Ill I
Pag= 4
REF,NO.
26
27
27W
27N
28
28LN
,,, ,,
29
30
31
.,.._:_.,
30
QTY.
4
4
6
6
6
6
2
1
1
2
31
O
DESCRIPTION '
Bolt 5/16" x 1" Pan Head
Bolt 3/8" x3/4" Pan'"Head
Split Lock Washer 3/8"
Hex Nut 3/8"
Bolt 318"x 3/4" Hex Head
Lock Nut 3/8"
Bolt 3/8" x "1"Hex Head
Hitch Pin (HP-3)
Hair Pin Cotter
Cotter Pin 1/8" x 1 1/2;"
Loading...