Craftsman 580752620 Owner’s Manual
Operator'sManual
2800 PSI MAX
2.5 GPMMAX
PRESSUREWASHER
ModelNo. 580.752620
®
• Safety
HOURS: IVlon.- Fri. 8 a.m. to 5 p.m. (CT)
• Assembly
• Operation
WARNING
Beforeusing this product, readthis
manualand follow all Safety Rules
and OperatingInstructions.
This pressure washer is rated in accordance to the Pressure Washer Manufacturers Association
(PWMA) standard PW101 (Testing and Rating Performance of Pressure Washers).
Esta iimpiadora a presi6n est_ ciasificada conforme a la norma PW101 (comprobaci6n y ciasificaci6n de rendimiento de limpiadoras
a presi6n) de la Asociaci6n defabricantes de bombas a presi6n (Pressure Washer Manufacturers Association, PWMA).
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit our Craftsmanwebsite:www.craftsman.com
Part No. 208819GS Draft B(03/04/2009)
Antes de utilizar el producto, lea este
manualy siga todas las Reglasde
Seguridad e Instrucciones de Uso.
ADVERTENCIA
• Maintenance
• Parts
• Espafiol,p. 32
WARRANTY.......................................... 2
REPAIRPROTECTIONAGREEMENT........................ 2
SAFETYRULES...................................... 3-5
FEATURESANDCONTROLS.............................. 6
ASSEMBLY........................................ 7-10
OPERATION....................................... 11-15
SPECIFICATIONS..................................... 16
MAINTENANCE.................................... 17-20
STORAGE........................................... 21
TROUBLESHOOTING.................................. 22
NOTES............................................. 23
REPLACEMENTPARTS.............................. 24-29
EMISSIONCONTROLWARRANTY..................... 30-31
ESPAKIOL......................................... 32-55
HOWTOORDERPARTS........................ BACKPAGE
CRAFTSMANFULLWARRANTY
If this Craftsmanproduct fails dueto adefect in material or workmanship within two years from the date of purchase, return it
to anySears store, Sears Parts & RepairService Center, or other Craftsmanoutlet inthe United Statesfor free repair (or
replacementif repair proves impossible).
This warranty appliesfor only 90 daysfrom the dateof purchase if this product is ever usedfor commercial or rental
purposes.
Thiswarranty coversONLYdefectsin material andworkmanship.Searswill NOTpayfor:
• Expendableitems that canwear out from normal usewithin the warranty period, such as spray guns, hoses, nozzle
extensions, nozzles,filters and spark plugs.
• Repairsnecessarybecauseof accident, or failure to operateor maintain the product according to all supplied instructions.
• Preventivemaintenance,or repairs necessarydue to improper fuel mixture, contaminated or stalefuel.
This warranty givesyou specific legal rights, and you may also haveother rights which vary from stateto state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Congratulations on making a smart purchase.
Your new Craftsman® product is designed and manufactured
for years of dependableoperation. But like allproducts, it
may requirerepair from time to time. That'swhen havinga
Repair ProtectionAgreement can saveyou money and
aggravation.
Here'swhat the RepairProtectionAgreement*includes:
• Expertservice by our 10,000 professional repair
specialists
• Unlimited serviceand no chargefor parts and labor on
all coveredrepairs
• Product replacement up to $1500 if your covered
product can't be fixed
• Discountof 10% from regular priceof serviceand related
installed parts not covered by the agreement; also,10%
off regular price of preventivemaintenance check
• Fasthelp by phone-we call it Rapid Resolution- phone
support from aSears representative.Think of us as a
"talking owner's manual".
Onceyou purchasethe RepairProtection Agreement,a
simple phonecall is all it takes for you to schedule service.
You cancall anytime day or night, or schedule a service
appointment online.
The Repair Protection Agreement is a risk-free purchase. If
you cancelfor any reasonduring the product warranty
period,we will provide a full refund. Or, aprorated refund
anytime after the product warranty periodexpires. Purchase
your Repair Protection Agreement today!
Somelimitations and exclusionsapply. Forpricesand
additionalinformationin the U.S.A. call 1-800-827-6655.
* Coveragein Canadavariesonsome items. Forfull
details, call SearsCanadaat 1-800-361-6665.
SearsInstallation Service
ForSearsprofessional installation of home appliances,
garagedoor openers, water heaters,and other major home
items, inthe U.S.A.or Canadacall 1-800-4-MY-HOME®.
@2009
Readthismanualcarefully and becomefamiliar
with your pressurewasher. Knowitsapplications,
itslimitations, and anyhazardsinvolved.
Important Safety Information
Safety Symbolsand Meanings
A, WARNING The engine exhaust from this product
contains chemicals known to the Stateof Californiato
cause cancer, birth defects,or other reproductive harm.
A, WARNING This product contains lead and lead
compounds, known to the State of Californiato cause
birth defects or other reproductive harm. Washyour
handsafter handling this product.
ToxicFumes Kickback
ElectricalShock
2 %
SlipperySurface Fall
Fire
MovingParts
,A The safetyalert symbol indicatesa potential personal
injury hazard.A signalword (DANGER,WARNING,or
CAUTION)is usedwith thealert symbol to designatea degree
or levelof hazardseriousness.Asafety symbol may be used
to representthe type of hazard.The signal word NOTICEis
usedto addresspractices not relatedto personalinjury.
A, DANGERindicatesa hazardwhich, if not avoided, will
result in death or serious injury.
A, WARNINGindicates ahazardwhich, if not avoided, could
result in death or serious injury.
A, CAUTIONindicates a hazardwhich, if not avoided,could
result in minor or moderateinjury.
NOTICEaddress practices not relatedto personal injury.
Explosion Operator'sManual
FlyingObjects Hot Surface
FluidInjection
A, WARNING Running engine gives off carbon
monoxide, an odorless, colorless, poison gas.
_ Breathingcarbon monoxide headache,
fatigue, dizziness,vomiting, confusion, seizures,
nausea,fainting or death.
Some chemicals or detergentsmay be harmful if inhaled
or ingested, causing severenausea,fainting, or
poisoning.
• OperatepressurewasherONLYoutdoors.
• Keepexhaustgasfromenteringa confinedareathrough
windows,doors,ventilationintakes,or otheropenings.
• DONOTstartor run engineindoorsorin anenclosedarea,
evenifwindowsanddoorsareopen.
• Usea respiratorormaskwheneverthereisa chancethat
vaporsmaybeinhaled.
• Readall instructionswith masksoyou arecertainthemaskwill
providethenecessaryprotectionagainstinhalingharmful
vapors.
can cause
_k WARNING Starter cord kickback (rapid retraction)can
result in bodily injury. Kickbackwill pull hand and
,_arm toward enginefaster than you can let go.
Broken bones,fractures, bruises, or sprains
could result.
• NEVERpull starter cord without first relieving spraygun
pressure.
• When starting engine,pull cord slowly until resistance is felt
andthen pull rapidly to avoid kickback.
• After each starting attempt, where enginefails to run, always
point spray gun in safe direction, pressred button andsqueeze
spray gun trigger to releasehigh pressure.
• Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury when spraygun kicks back.
A, WARNING Riskof electrocution.
"_,dh Contactwith power sourcecan causeelectric
shock or burn.
• NEVERspraynearpowersource.
_k WARNING The high pressure stream of water that
and its underlying tissues, leading to serious
this equipment produces can cut through skin
injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.
• DONOTallow CHILDRENto operate pressure washer.
• NEVERrepair high pressure hose. Replaceit.
• NEVERrepair leaking connections with sealantof any kind.
Replaceo-ring or seal.
• NEVERconnect high pressure hoseto nozzleextension.
• Keephigh pressure hose connectedto pump and spraygun
while system is pressurized.
• ALWAYS pointspray gun in safedirection, press red button
andsqueezespray gun trigger to releasehigh pressure, every
time you stop engine.
• NEVERaim spray gun at people,animals, or plants.
• DO NOTsecure spraygun in open position.
• DO NOTleavespray gun unattendedwhile machine is running.
• NEVERuse a spray gun which does not havea trigger lockor
trigger guard in placeand in working order.
• Always be certain spray gun, nozzlesand accessoriesare
correctly attached.
_k WARNING Fuel and its vapors are extremely
flammable and explosive.
Fire or explosion can cause severe burns
or death.
WHENADDING OR DRAININGFUEL
• Turn pressurewasher OFFand let it cool at least 2 minutes
before removing fuel cap. Loosencapslowly to relievepressure
in tank.
• Fill or drain fuel tank outdoors.
• DONOToverfill tank. Allow spacefor fuel expansion.
• Iffuel spills, wait until it evaporatesbeforestarting engine.
• Keepfuel away from sparks, open flames, pilot lights, heat,and
other ignition sources.
• DONOTlight a cigaretteor smoke.
WHENSTARTINGEQUIPMENT
• Ensurespark plug, muffler,fuel cap,and air cleanerare in place.
• DO NOTcrank enginewith spark plug removed.
WHENOPERATINGEQUIPMENT
• DONOTtip engine or equipmentat anglewhich causes fuel to
spill.
• DONOTspray flammable liquids.
WHENTRANSPORTINGOR REPAIRINGEQUIPMENT
• Transport/repair with fuel tank EMPTYor with fuel shutoff valve
OFF.
• Disconnectspark plug wire.
WHENSTORINGFUELOR EQUIPMENTWITH FUELIN TANK
• Store awayfrom furnaces, stoves, water heaters,clothes
dryers, or other appliancesthat have pilot light or other ignition
source becausethey can ignitefuel vapors.
_k WARNING Contact with muffler area can result in
serious burns.
_ _ Exhaust heat/gases can ignite
fuel tank causing a fire.
• DO NOTtouch hot parts and AVOIDhot exhaust gases.
• Allow equipmentto cool beforetouching.
• Keepat least5 feet (152 cm) of clearanceon all sides of
pressure washer including overhead.
• It is a violation of California Public Resource Code,Section
4442, to use or operate the engine on any forest-covered,
brush-covered, or grass-covered land unless the exhaust
system is equipped with a spark arrester, as defined inSection
4442, maintained in effective working order. Other states or
federaljurisdictions may have similar laws.
Contactthe original equipment manufacturer, retailer, or dealer
to obtain a spark arrester designedfor the exhaust system
installed on this engine.
• Replacement parts must bethe sameand installed in the same
position as the original parts.
combustibles, structures or damage
_i, WARNING Use of pressure washer can create
,_ Kickback from spray gun can cause you
• Operatepressurewasher from a stable surface.
• Thecleaning areashould have adequateslopes and drainageto
reducethe possibility of a fall due to slippery surfaces.
• Beextremely careful if you must usethe pressurewasherfrom
a ladder, scaffolding, or any other similar location.
• Firmly grasp spray gun with both hands whenusing high
pressure spray to avoid injury when spraygun kicks back.
_i, WARNING Unintentional sparking can result in fire or
WHENADJUSTINGOR MAKINGREPAIRSTO YOURPRESSURE
WASHER
• Disconnectthe spark plug wire from the spark plug and place
the wire where it cannot contact spark plug.
WHENTESTINGFORENGINESPARK
• Use approved spark plug tester.
• DONOTcheckfor spark with spark plug removed.
_i, WARNING Starter and other rotating parts can
entangle hands, hair, clothing, or accessories.
• NEVERoperatepressure washer without protective housing or
covers.
• DO NOTwear looseclothing, jewelry or anything that may be
caught in the starter or other rotating parts.
• Tie up long hair and remove jewelry.
puddles and slippery surfaces.
to fall.
_¢ electric shock.
A WARNING Risk of eyeinjury.
Spray cansplash back or propel objects.
• Always wear indirect vented (chemical splash) safety goggles
markedto comply with ANSIZ87.1 when using or in vicinity of
this equipment.
• NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safety goggles.
NOTICE High pressure spray may damagefragile items
including glass.
• DONOTpointspraygunatglasswhenusingred(0°) spraytip.
• NEVERaimspraygunat plants.
NOTICE Improper treatment of pressure washer can
damage it and shorten its life.
• If you have questions about intended use,ask dealer or contact
Sears.
• NEVERoperate units with broken or missing parts, or without
protective housing or covers.
• DO NOTby-pass any safety device on this machine.
• DONOTtamper with governed speed.
• DONOToperate pressure washer above rated pressure.
• DONOTmodify pressure washer in any way.
• Beforestarting pressure washer in cold weather, check all parts
of the equipmentto besure ice has not formed there.
• NEVERmove machine by pulling on hoses. Use handle provided
on unit.
• Checkfuel system for leaksor signs of deterioration, such as
chafed or spongy hose, loose or missing clamps, or damaged
tank orcap. Correct all defects before operating pressure washer.
• This equipmentis designedto be used with Searsauthorized parts
ONLY.If equipmentis used with parts that DONOTcomply with
minimum specifications, userassumesall risks and liabilities.
KNOWYOURPRESSUREWASHER
[_ Readthe Operator'sManual andsafetyrules before operatingyourpressure washer.
Comparethe illustrations with your pressurewasher to familiarize yourself with the locations of various controls and
adjustments. Savethis manualfor future reference.
A- SprayGun-- Controls the application of water onto cleaning
surface with trigger device. Includes trigger lock.
B- SprayTips- Detergent,0°, 15° and 40°: for various high
pressure cleaning applications.
C- Accessory Tray -- Providesconvenient storage for accessories,
such as gun, spray tips, etc.
D - RecoilStarter-- Usedfor starting the engine manually.
E - Fuel Tank-- Filltank with regular unleaded fuel. Always leave
room for fuel expansion.
F - Bottle Bracket -- Cleaningsolution bottle fits in wire form
bracket here. Concentratebottle not included.
G - Warning/OperatingInstructionsTag -- Identifies hazardsand
proper procedureto start/stop pressurewasher.
H - Air Filter-- Protects engine byfiltering dust and debris out of
intakeair.
J- Throttle Lever -- Setsengine in starting mode for recoil starter
andstops a running engine.
K- PrimerBulb-- Preparesa cold enginefor starting.
L - Water Inlet -- Connection for garden hose.
M - AutomaticCool DownSystem-- Cycleswater through pump
when water reaches125°-155°F.Warm water will discharge
from pump onto ground. This system prevents internal pump
damage.
N - Pump-- Developshigh pressure.
P- DetergentSiphoningTube/Filter-- Useto siphon pressurewasher
safedetergentsintothe low pressurestream.
R- HighPressureOutlet -- Connectionfor high pressurehose.
S - Oil Fill/Dipstick -- Check,add anddrain engine oil here.
T - Project Pro® PerfectMWMSiphon-- Mixes concentrate with
pressure washer spray.
U - Fold DownHandle-- Handleand accessory tray fold flat atop
cold engine for space-saving storage.
V - Spray Tip Extensionwith QuickConnect-- Allows you to
switch betweenfour different spraytips.
W - Hose Wrap and High PressureHose-- Hosewrap provides
easytransport and handling of the high pressure hose. Connect
oneend of hoseto water pump and the other end to spray gun.
Items Not Shown:
IdentificationLabel (nearrear of base plate) -- Provides model
and serial number of pressure washer. Pleasehave these readily
available if callingfor assistance.
Your pressurewasher requires some assembly and is ready
for useonly after it has been properly serviced with the
recommendedoil and fuel.
If you haveanyproblems with theassemblyof your
pressurewasher, please call the pressurewasher helpline
at 1-800-222-3136.
UNPACKTHE PRESSUREWASHER
1. Removeeverything from carton except pressurewasher.
2. Opencarton completely by cutting eachcorner from top
to bottom.
3. Removepressure washer from carton.
CARTONCONTENTS
Checkall contents. If anyparts are missing or damaged,call
the pressure washer helplineat 1-800-222-3136.
• Main Unit
• Handle
• AccessoryTray
• High PressureHose
• Spray Gun
• SprayTip Extension with Quick ConnectFitting
• Oil Bottle
• HoseWrap
• DetergentSiphoning Hose/Filter
• Bottle Bracket Wireform
• PerfectMixTM Siphoning Unit/Hose
• Parts Bag(which includes the following):
• Operator's Manual
• Owner's Registration Card
• Bag containing 4 multi-colored Spray Tips
• HandleFasteningHardwareKit (whichincludes):
• HandleBolts (2)
• CarriageBolt (1)
• Plastic Knobsfor Handle(2)
• Rope Guide(1)
• Plastic Knob (2)
• TreeClips (4)
Becomefamiliar with eachpiece before assemblingthe
pressure washer Identify all contents with the illustration on
page 6 If any parts are missing or damaged,call the
pressure washer helpline at1-800-222-3136.
6 Connectpressure hoseto spray gun and pump
7 Connectwater supply to pump
8 Attach spray tip extension to spray gun
9 Select/attach quick connect spray tip to spraytip
extension
Attach Handle and Accessory Tray
1 Placehandle(A) onto handlesupports (B) connectedto
main unit Makesure holes (6) in handlealign with holes
(6) on handlesupports
,
Insert handle carriagebolts (D) through holes from
inside of unit and attach a plastic knob (E)from outside
of unit Tighten by hand Byloosening both knobs to the
middle section of the attachment bolt, the upperhandle
canfold forward to storeflat atop the cold engine Note:
DONOTfold the handledown while the engine is hot
,
Placeaccessory tray (F) over holes (6) on handle
(viewing from backof unit) Push the tree clips (H) into
the holes until they sit flat againstthe accessorytray
ASSEMBLINGPRESSUREWASHER
Your Craftsmanpressure washer will needassembly before
operation:
1 Fill out and sendin registration card
2 Attach handle and accessorytray
3 Connectdetergent siphon hose to pump
4 Add oil to engine crankcase
5 Add fuel to fuel tank
/
,
Insert multi-colored QuickConnect spray tips and other
supplied accessoriesin spacesprovided in accessory
tray SeeHow to UseAccessory Tray
.
Attach rope guide (A) through handlewith plastic knob
(B). Tighten by hand. Route engine recoil ropethrough
guide.
.
Align hosewrap (6) to the back side of accessory tray.
Locate notch with "unlock" icon (D) on hosewrap.
Position notch at top with hosewrap in vertical position.
Clips in the back of accessorytray should slide into the
grooves on the inside surface of hosewrap. Slide hose
wrap on back of accessorytray and rotate 1/8 turn until
"locked"icon (E) is invertical position. Hosewrap is
easily removed from the accessorytray for wrapping and
unwrapping of the high pressure hose. A clip to secure
the hoseon the reelmakesit easyto wrap the hose
while it is detachedfrom the accessory tray.
StandardSiphonTube
Cleartube with filter:
When using the clear siphon tube, dilute
1 part PerfectMixTM ExtremeConcentrate
to 16 parts water (4 oz of concentrate
makes1/2 gallon of mix.)
Attach Project Pro® PerfectMix TM Siphon to
Pump
Attach the hose end of the blue PerfectMixTM Siphon (J) to
the barbed hosefitting (K)on the pump.
Attach PerfectMix TM Detergent Siphon to
Concentrate Bottle
PlacePerfectMixTM bottle (not included) in the wire-form
bracketon the handle. Removecap from bottleand insert the
PerfectMixTM Siphon (L). Screwthe siphon unit to the top of
the bottle (M). Usethe clip on the cap (L) to snapsiphon to
wire form bracketwhen siphon is not in a concentrate bottle.
.
Attach bottle bracket(F) to handle with carriage bolt (6)
and blackplastic knob (H). Tighten by hand.
G
2-1N-1 Soap System
The pressurewasher is equippedwith two detergent
siphoning hoses.
Project ProPerfectMixTM Siphon
Blue tube with blue bottle cap:
When usingthe blue PerfectMixTM siphon, use
the PerfectMixTM ExtremeConcentratestraight
from the bottle.
®
Add Engine Oil
1. Placepressurewasher on a flat, levelsurface.
2. Cleanareaaround oil fill and removeyellow oil fill
cap/dipstick.
3. Usingoil funnel (optional), slowly pour contentsof
provided oil bottle into oil fill opening.
NOTICE Improper treatment of pressure washer can
damage it and shorten its life.
• DONOTattemptto crank or start the engine before it has been
properly servicedwith the recommended oil. This may result inan
enginefailure.
4. Replaceoil fill cap/dipstick and fully tighten.
Add Fuel
Fuel mustmeet theserequirements:
• Clean,fresh, unleaded gasoline.
• A minimum of 87 octane/87 AKI (91 RON).High altitude
use, see HighAltitude.
• Gasolinewith up to 10% ethanol (gasohol) or upto 15%
MTBE (methyl tertiary butyl ether) is acceptable.
NOTICE Avoid pressure washer damage.
Failureto follow Operator's Manualfor fuel
recommendations voids warranty.
• DONOTuseunapprovedgasolinesuchasE85.
• DONOTmixoil in gasoline.
• DONOTmodifyengineto runonalternatefuels.
To protect the fuel system from gum formation, mix in a fuel
stabilizerwhen adding fuel. SeeStorage.All fuel is not the
same. If you experiencestarting or performance problems
after using fuel, switch to a different fuel provider or change
brands. This engine is certified to operate on gasoline. The
emission control system for this engine is EM (Engine
Modifications).
_i, WARNING Fueland its vapors are extremely
flammable and explosive.
Fireor explosion can causesevere burns
or death.
WHENADDINGFUEL
• Turn pressure washerOFFand let it cool at least2 minutes
before removing fuel cap. Loosencapslowly to relievepressure
in tank.
• Fill fuel tank outdoors.
• DONOToverfill tank. Allow spacefor fuel expansion.
• If fuel spills, wait until it evaporatesbefore starting engine.
• Keepfuel away from sparks, open flames, pilot lights, heat,and
other ignition sources.
• DONOTlight a cigarette or smoke.
1. Cleanareaaround fuel fill cap, removecap.
2. Slowly add regular unleadedfuel (A) to fuel tank (B). Be
careful not to overfill. Allow about 1.5" (4 cm) (C) of tank
spacefor fuel expansion.
3. Install fuel cap and wait for any spilledfuel to evaporate.
CAUTION!Alcohol-blendedfuels (calledgasohol, ethanol or
methanol) can attract moisture, which leadsto separationand
formation of acidsduring storage.Acidic gascan damage the
fuel system of an enginewhile in storage.
To avoid engine problems, the fuel system should be treated
with a fuel preserveror emptied beforestorage of 30 days or
longer. If adding a fuel preserver,fill the fuel tank with fresh
fuel. If only partially filled, air inthe tank will promote fuel
deterioration during storage. If fuel preserver is not used,
drain the fuel tank, start the engineand let it run until the fuel
lines and carburetor are empty. Usefresh fuel next season.
See Storage for additional information.
NEVERuse engine or carburetor cleaner products in the fuel
tank as permanent damagemay occur.
HighAltitude
At altitudes over 5,000 feet (1524 meters), a minimum
85 octane/ 85 AKI (89 RON)gasolineis acceptable.To
remainemissions compliant, high altitude adjustment is
required. Operationwithout this adjustment will cause
decreasedperformance, increasedfuel consumption, and
increasedemissions. Seea qualified Sears dealerfor high
altitude adjustment information. Operationof the engine at
altitudes below 2,500 feet (762 meters) with the high altitude
kit is not recommended.
Connect Hose and Water Supply to Pump
NOTICE DO NOTrun the pump without the water supply
connectedand turned on.
• Damagetoequipmentresultingfromfailuretofollowthis
instructionwillvoidwarranty.
4. Run water through garden hosefor 30 seconds to flush
it of debris.Turn off water.
IMPORTANT:DONOTsiphon standing water for the water
supply. Use ONLYcold water (less than 100°F).
5. Connectgarden hose(not to exceed50 feet in length) to
water inlet. Tightenby hand.
NOTE:Removeand discard the shipping capsfrom the
pump's high pressure outlet andwater inlet before attaching
hoses.
1. Uncoil high pressure hose and attachone end of hose to
baseof spray gun. Tighten by hand.
_i, WARNING The high pressure stream of water that
and its underlying tissues, leading to serious
this equipment produces can cut through skin
injury and possible amputation.
• NEVERconnect high pressure hoseto nozzleextension.
• Keephigh pressure hose connectedto pump and spraygun
while system is pressurized.
• Always becertain spray gun, nozzlesand accessoriesare
correctly attached.
2. Attach other end of high pressure hoseto high pressure
outlet on pump. Tighten by hand.
NOTICE Using aOneWay Valve (vacuumbreakeror check
valve) at pump inlet can cause pump or inlet connector
damage.
• ThereMUSTbeatleasttenfeetofunrestrictedgardenhose
betweenthe pressurewasherinletandanydevice,suchas a
vacuumbreakeror checkvalve.
• Damageto equipment resulting from failure to follow this
instruction will void warranty.
_i, WARNING Risk of eyeinjury.
Spray cansplash back or propel objects.
• Always wear indirect vented (chemical splash) safety goggles
markedto comply with ANSIZ87.1 when using or in vicinity of
this equipment.
• NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safety goggles.
6. Turn ONthe water, press red button (B) on the gun and
squeezethe trigger to purge the pump system of air and
impurities.
.
Beforeconnectinggarden hoseto water inlet, inspect
inlet screen (A). Cleanscreen if it contains debris or have
it replacedif damaged.DONOTrun pressure washerif
inlet screenis damagedor missing.
Checklist Before Starting Engine
Reviewthe unit to ensureyou haveperformed all of the
following:
1. Besure to read SafetyRules and Operationsections
before using the pressure washer.
2. Makesure handleis in placeand secure.
3. Checkthat oil has beenadded to proper level in engine
crankcase.
4. Add proper fuel to fuel tank.
5. Checkfor proper hose connections (high pressure and
water supply) andthat there are no kinks, cuts, or
damageto the high pressure hose.
6. Provide proper water supply (not to exceed100°F).
10
HOWTOUSEYOURPRESSUREWASHER
If you haveany problems operating your pressure washer,
pleasecallthe pressure washer helpline at 1-800-222-3136.
Pressure Washer Location
PressureWasherClearance
_i, WARNING Exhaustheat/gases can ignite
combustibles, structures or damagefuel tank
causing a fire.
• Keepat least5 ft. (152 cm) clearanceon all sides of pressure
washer including overhead.
Placepressure washer outdoors in an area that will not
accumulate deadly exhaustgas. DONOTplacepressure
washer where exhaustgas (A) could accumulate and enter
inside or be drawn into a potentially occupied building.
Ensureexhaustgas is kept awayfrom anywindows, doors,
ventilation intakes, or other openings that can allow exhaust
gasto collect in aconfined area. Prevailingwinds and air
currents should betaken into consideration when positioning
_ressurewasher.
_i, WARNING Runningenginegives off carbon
monoxide,an odorless, colorless, poisonous gas.
_ Breathing can cause headache,
fatigue, dizziness,vomiting, confusion, seizures,
nausea,fainting or death.
• OperatepressurewasherONLYoutdoors.
• Keepexhaustgasfromenteringa confinedareathrough
windows,doors,ventilationintakes,orotheropenings.
• DONOTstartor runengineindoorsorin anenclosedarea,
evenifwindowsanddoorsareopen.
carbon monoxide
To Start Your Pressure Washer
To start your engine-powered pressurewasher for the first
time, follow these instructions step-by-step. This information
alsoapplies wheneveryou start the engine after you havelet
the pressure washer sit idle for at leasta day.
1. Placepressurewasher outside nearan water source
capableof supplying waterat aflow rate greaterthan
3.3 gallons per minute and no less than 20 PSI at
pressurewasher end of garden hose.
2. Checkthat high pressure hose is tightly connectedto
spray gun and pump. SeeAssemblyfor illustrations.
3. Makesure unit is in alevelposition.
4. Connectgarden hoseto water inlet on pressurewasher
pump.
NOTICE DONOTrun the pump without the watersupply
connectedand turned on.
• Damageto equipmentresultingfromfailureto followthis
instructionwill voidwarranty.
,
Turn ONthe water, press red button on the gun and
squeezethe trigger to purge the pump system of air and
impurities.
,
Attach spray tip extension to spray gun. Tighten by
hand.
,
Choosespray tip you wantto use and insert it into spray
tip extension. See How to Use Spray Tips.
,
Move throttle leverto "Fast" position (B), shown asa
rabbit.
11
To start the engine for the veryfirst time:
9A. Push primer bulb (A) firmly 5 times, waiting 2 seconds
between each push.
To start engine thereafter:
9B. Press primer bulb (A) firmly 3 times, waiting 2 seconds
between each push. For a warm engine, DO NOT press
primer bulb.
IMPORTANT: Before starting the pressure washer, be sure
'ou are wearing safety goggles as described below.
A. WARNING Riskof eyeinjury.
Spraycan splash backor propel objects.
• Always wear indirect vented (chemical splash) safety goggles
markedto comply with ANSIZ87.1 when using or in vicinity of
this equipment.
• NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safety goggles.
0. When starting engine, position yourself as
recommendedand grasp starter grip handle and pull
slowly until you feel some resistance.Then pull rapidly
to start engine.
A, WARNING Starter cord kickback (rapid retraction) can
result in bodily injury. Kickback will pull hand and
_,__ arm toward engine faster than you can let go.
could result.
• NEVERpull starter cord without first relieving spraygun
• When starting engine,pull cord slowly until resistance is felt
• After each starting attempt, where enginefails to run, always
• Firmly grasp spray gun with both handswhen using high
1. Return recoil starter slowly. DO NOT let rope "snap
NOTE: Always keep the throttle lever in the "Fast" position
when operating the pressure washer.
A, WARNING The high pressure stream of water that
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.
• DONOTallow CHILDRENto operatepressure washer.
• Keephigh pressure hose connectedto pump and spraygun
• NEVERaim spray gun at people,animals, or plants.
• DO NOTsecure spray gun in open position.
• DO NOTleavespray gun unattendedwhile machine is running.
• NEVERuse a spray gun which doesnot havea trigger lock or
• Always be certain spray gun, nozzlesand accessoriesare
Broken bones, fractures, bruises, or sprains
pressure.
andthen pull rapidlyto avoid kickback.
point spray gun in safedirection, press red button andsqueeze
spray gun trigger to releasehigh pressure.
pressure spray to avoid injury when spraygun kicks back.
back" against starter.
and its underlying tissues, leading to serious
this equipment produces can cut through skin
injury and possible amputation.
while system is pressurized.
trigger guard in place andin working order.
correctly attached.
A, WARNING Contact with muffler area can result in
serious burns.
,_ heat/gases can ignite
fuel tank causing a fire.
• DO NOTtouch hot parts and AVOIDhot exhaust gases.
• Allow equipmentto cool beforetouching.
• Keepat least5 feet (152 cm) of clearanceon all sides of
pressure washer including overhead.
• It is a violation of California Public ResourceCode, Section
4442, to use or operate the engine on any forest-covered,
brush-covered, or grass-covered land unlessthe exhaust
system is equippedwith a spark arrester, as definedin Section
4442, maintained in effective working order. Otherstates or
federaljurisdictions may havesimilar laws.
Contactthe original equipment manufacturer, retailer, or dealer
to obtain a spark arrester designedfor the exhaustsystem
installed onthis engine.
• Replacementparts must bethe same and installed in the same
position as the original parts.
Exhaust
combustibles, structures or damage
12
How to Stop Your Pressure Washer
1. Releasespray gun trigger and let engine idle for two
minutes.
2. Movethrottle to SLOWposition,then STOPposition.
3. ALWAYSpoint spraygun in a safe direction, push red
button and squeezespraygun trigger to releaseretained
high water pressure.
IMPORTANT:Spray gun traps high water pressure,even
when engine is stopped and water is disconnected.
A. WARNING The high pressure stream of water that
and its underlying tissues, leadingto serious
this equipment produces can cut through skin
injury and possible amputation.
Spraygun traps high water pressure, evenwhen engine is
stopped and water is disconnected, which can cause
injury.
• Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
• ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntriggerto releasehighpressure,every
timeyoustopengine.
How to Use Spray Tips
Thequick-connect on the spraytip extensionallows you to
switch betweenfour different quick connect spray tips. The
spray tips vary the spraypattern asshown below.
Low Pressure
Black
Use to apply
chemical
High Pressure
m i
r_
How to Use Accessory Tray
The unit is equipped with an accessory tray with places to
store your spray gun, spray tip extension andquick connect
spray tips. Thereis also adetachable hosewrap at the back
of the accessory tray to hold your high pressure hose.
1. Placespray tip extension in clip on back of accessory
tray.
2. Placespray gun through hole on accessorytray on right
side of unit.
3. Insert multi-colored spray tips in spacesprovided in
accessorytray.
4. Wrap high pressurehose on hose wrap then attach hose
wrap to backof accessorytray.
5. Hook provided on back of accessorytray for safely
storing safety goggles.
40° White
2800 PSI
2.5 GPM
15° Yellow 0° Red
2800 PSI 2800 PSI
2.5 GPM 2.0 GPM
Followtheseinstructionsto changespraytips:
1. Pull back collar on quick-connect and pull current spray
tip off. Store spray tips in holder provided on the
accessorytray.
A. WARNING The high pressure stream of water that
and its underlying tissues, leading to serious
this equipment produces can cut through skin
injury and possible amputation.
• NEVERexchangespraytipswithoutthetriggerlockedonthe
spraygun.
• DONOTtwistspraytipswhilespraying.
.
Select desired spray tip:
• For delicate rinse(lower pressureand higher flow),
for gentlecleaning of cars/trucks, boats, RV's, patio
furniture, lawn equipment, etc., select white 40°
spray tip.
• For generalrinsing (medium pressure and medium
flow), ideal for most all purpose cleaningsuch as
home siding, brick patios, wood decks,driveways
and sidewalks, garagefloors, etc.,selectyellow
15° spray tip.
• For maximum rinsing (higher pressureand lower
flow), for stubborn or hardto reachsurface such as
second story surfaces, paint removal,oil stains, rust
removal or other stubborn substances(tar, gum,
grease,wax, etc.), select red 0° spraytip.
• To apply detergent,applies project specific cleaners
to help breakdown stubborn dirt and grime on a
variety of surfaces, select black detergentspray tip.
13
3. Pullbackon collar,insert new spraytip and releasecollar.
Tugon spraytip to makesureit is securelyin place.
UsageTips
• For most effective cleaning, keep spray tip from 8 to
24 inches(20 to 61 cm) awayfrom cleaning surface.
• If you get spray tip too close, especiallyusing a high
pressure spray tip, you may damage surfacebeing
cleaned.
• DONOTget closer than 6 inches (15 cm) when cleaning
tires.
2-1N-1 Soap System
& CAUTION Chemicalscancause bodily injury, and/or
property damage.
• NEVERusecausticliquidwith pressurewasher.
• UseONLYpressurewashersafedetergents/soaps.Followall
manufacturersinstructions.
CleaningandApplyingDetergentwith the
Project Pro@PerfectMixTM Siphon
To apply undiluted detergent using the blue
PerfectMixTM siphon,follow these steps:
1. Reviewuse of spray tips.
2. Attach PerfectMixTM siphon hoseto
pump and PerfectMixTM concentrate
bottle.
NOTICE Contactwith the hot muffler can damage detergent
siphoning tube.
• Wheninsertingthesiphonintoa detergentsolutionbottle,route
thetubesoasto keepit from inadvertentlycontactingthehot
muffler.
3. Makesure black detergent spray tip is installed.
NOTE:Detergent cannot be applied with the high pressure
spray tips (White, Yellow or Red).
4. Makesure garden hose is connectedto water inlet.
Checkthat high pressure hoseis connected to spray gun
and pump.Turn on water.
NOTICE You must attachall hosesbefore you start the
engine.
• Startingthe enginewithoutallthehosesconnectedandwithout
thewaterturnedONwill damagethepump.
• Damageto equipmentresultingfromfailuretofollowthis
instructionwill voidwarranty.
5. Start enginefollowing instructions How to Start Your
Pressure Washer.
6. Apply detergent to a dry surface, starting at lower
portion of areato be washedand work upward, using
long, even,overlapping strokes.
7. Allow detergent to "soakin" for 3-5 minutes before
washing andrinsing. Reapplyas neededto prevent
surfacefrom drying. DONOTallow detergentto dry on
(prevents streaking).
//
//
Cleaningand ApplyingDetergentwith
the StandardClearSiphon
To apply diluted detergent using the
standard clear siphon tube, follow these
steps:
1. Reviewuse of spray tips.
2.
Attach clear siphon hoseto barbedfitting on pump.
3.
Mix detergentsolution as requiredby job.
4. Placesmall filter end of clear siphoning tube into
container with diluted solution as described above.
NOTE:DONOT insert standard siphon hose in Extreme
Concentrate.Failure to dilute concentratewill causeexcessive
application and consumption of solution.
NOTE:Makesure the filter is fully submerged influid while
applying solution.
NOTICE Contactwith the hot muffler can damagedetergent
siphoning tube.
• Wheninsertingthesiphonintoadetergentsolutionbottle,route
thetubeso asto keepitfrom inadvertentlycontactingthehot
muffler.
5. Makesure black detergentspray tip is installed.
NOTE:Detergentcannot be applied with the high pressure
spray tips (White, Yellow or Red).
6. Makesure garden hoseis connectedto water inlet.
Checkthat high pressure hose is connectedto spray gun
and pump. Turn onwater.
NOTICE You must attachall hoses beforeyou start the
engine.
• Startingtheenginewithoutall thehosesconnectedandwithout
thewaterturnedONwilldamagethe pump.
• Damageto equipmentresultingfrom failureto followthis
instructionwillvoidwarranty.
7. Start engine following instructions How to Start Your
Pressure Washer.
8. Apply detergentto a dry surface,starting at lower
portion of areato be washed and work upward, using
long, even, overlappingstrokes.
9. Allow detergentto "soakin" for 3-5 minutes before
washing and rinsing. Reapplyas neededto prevent
surfacefrom drying. DONOTallow detergentto dry on
(prevents streaking).
IMPORTANT:You must flush the detergentsiphoning system
after each use by placing the filter into a bucket of clean
water, then runthe pressurewasher in low pressure for 1-2
minutes.
14
Pressure Washer Rinsing
ForRinsing:
1. Removeblack detergent spray tip from spray tip
extension.
2. Selectand install desiredhigh pressurespray tip
following instructions How to UseSpray Tips.
3. Keepspray gun a safedistance from areayou plan to
spray.
A, WARNING Kickbackfrom spray gun cancauseyou to
fall.
• Operatepressurewasherfromastablesurface.
• Beextremelycarefulif youmustusethepressurewasherfrom
a ladder,scaffolding,or anyothersimilarlocation.
• Firmlygraspspraygunwith bothhandswhenusinghigh
pressuresprayto avoidinjurywhenspraygunkicksback.
4. Apply a high pressure spray to a small area and then
checksurface for damage.If no damageis found, you
can assumeit is okay to continue rinsing.
5. Start at top of areato be rinsed, working down with
same overlapping strokes as you used for cleaning.
Cleaning Detergent Siphoning Tube
If you usedthe clear detergent siphoning tube, you must
flush it with cleanwater before stopping the engine.
1. Placedetergent siphoning tube/filter in a bucket full of
cleanwater.
2. Removehigh pressure spray tip from spray tip
extension.
.
Select and install black detergent spray tip following
instructions How to UseSpray Tips.
4.
Flushfor 1-2 minutes.
5.
Shut off engine following instructions How to Stop
Pressure Washerandturn off water supply.
6.
ALWAYSpoint spray gun in a safe direction push red
button andsqueezespray gun trigger to releaseretained
high water pressure.
IMPORTANT:Spray gun traps high water pressure,even
when engine is stopped and water is disconnected.
A, WARNING The high pressure stream of water that
and its underlying tissues, leading to serious
this equipment produces can cut through skin
injury and possible amputation.
Spray gun traps high water pressure,even when engine is
stopped and water is disconnected, which can cause
injury.
• Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
• ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntriggerto releasehighpressure,every
timeyoustopengine.
Automatic Cool Down System (Thermal Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circulating water in the pump can reachtemperatures above
125°F.The systemengages to cool the pump by discharging
the warm water ontothe ground.
15
ENGINETECHNICALINFORMATION
This is a single cylinder, overheadvalve (OHV), air cooled
engine. It is a low emissions engine.
In the State of California, Model 120000 enginesare certified
by the California Air Resources Boardto meet emissions
standardsfor 125 hours. Such certification does not grant
the purchaser, owner or operator of this engine any
additional warranties with respect to the performance or
operational life of this engine.Theengine is warranted solely
according to the product and emissions warranties stated
elsewherein this manual.
Power Ratings
Thegross power rating for individual gas engine models is
labeled in accordancewith SAE(Society of Automotive
Engineers)codeJ1940 (Small Engine Power & Torque
Rating Procedure),and rating performance has been
obtained and corrected in accordancewith SAEJ1995
(Revision 2002-05). Torquevalues are derived at 3060 RPM;
horsepower values are derived at 3600 RPIVI.Actual gross
engine power will be lower and is affectedby, among other
things, ambient operating conditions and engine-to-engine
variability. Givenboth the wide arrayof products on which
enginesare placed andthe variety of environmental issues
applicableto operating the equipment,the gas enginewill not
developthe rated gross power when used in a given piece of
power equipment (actual "on-site"or net power). This
difference is due to avariety of factors including, but not
limited to, accessories(air cleaner, exhaust, charging,
cooling, carburetor, fuel pump, etc.), application limitations,
ambient operating conditions (temperature, humidity,
altitude), and engine-to-enginevariability. Dueto
manufacturing andcapacity limitations, Briggs & Stratton
may substitute an engine of higher ratedpower for this
Seriesengine.
This pressurewasher is rated in accordanceto the Pressure
Washer Manufacturers Association (PWIVIA)standard PW101
(Testing and Rating Performanceof PressureWashers).
PRODUCTSPECIFICATIONS
Pressure Washer Specifications
Max Outlet Pressure ....................... 2,800 PSI
Max Flow Rate............................. 2.5 GPM
DetergentMix ........................ Use as directed
Water SupplyTemperature .......... Not to exceed100°F
Engine Specifications
Bore ................................. 2.69 in. (68mm)
Stroke ............................... 2.04 in. (52mm)
Displacement ........................ 11.57in. (190cc)
SparkPlug
Type:...................... Briggs & Stratton 491055
SetGapTo: ...................... 0.020inch (0.50mm)
ArmatureAir Gap:........... 0.006-0.014in.(0.15-0.36mm)
Valveclearancewithvalvespringsinstalledandpiston1/4in.
(6 mm)pasttopdeadcenter(checkwhenengineiscold).
Intake.................... 0.004-0.006in.(0.10-0.15mm)
Exhaust .................. 0.004-0.008in.(0.10-0.20mm)
FuelCapacity............................... 1.6 Quarts
0il Capacity....................... 22 Ounces(0.65 liter)
NOTE:For practical operation, the engine load should not
exceed85% of ratedpower. Enginepower will decrease
3-1/2% for each1,000 feet (300 meters) above sealeveland
1% for each 10° F(5.6° C) above77° F(25° C). It should
operatesatisfactorily at anangle up to 15°.
16
OWNER'SRESPONSIBILITIES
Follow the hourly or calendarintervals, whichever occurs
first. More frequent service is requiredwhen operating in
adverseconditions noted below.
• Changeengine oil
• Check/clean water inlet screen'
• Checkhigh pressurehose
• Checkdetergent siphoning hose
• Checkspray gun and assembly for leaks
• Cleandebris
• Checkengine oil level
• Serviceengine air cleaner2
• Change engine oil_
• Inspect mufflerand spark arrester
• Servicespark plug
Emissions Control
Maintenance,replacement,or repair ofthe emissions
controldevicesand systemsmay be performedby any non-
roadenginerepair establishmentor individual. However,
to obtain "no charge" emissions control service, the work
must be performed by a factory authorizeddealer. Seethe
Emissions Warranty.
Before Each Use
1. Checkengine oil level.
2. Cleandebris.
3. Checkwater inlet screenfor damage.
4. Checkhigh pressure hose for leaks.
5. Checkgun and spray tip extension assemblyfor leaks.
6. Purge pump of air and contaminants.
PRESSUREWASHERMAINTENANCE
Clean Debris
Daily or before use, clean accumulateddebris from pressure
washer. Keeplinkage, spring and controls clean.Keeparea
around andbehind muffler free from any combustible debris.
Inspect cooling air slots and openings on the pressure
washer. Theseopenings must be kept clean and
unobstructed.
Pressurewasher parts should be kept cleanto reduce the
risk of overheating and ignition of accumulated debris.
• Usea damp cloth to wipe exterior surfaces clean.
• Cleancooling systeW
1Clean if clogged. Replace if perforated or torn.
2Service more often under dirty or dusty conditions.
General Recommendations
Regularmaintenancewill improve the performanceand
extendthe life of the pressurewasher. Seeany Searsor
other qualified service dealerfor service.
Thepressure washer warranty does not cover items that
havebeensubjected to operator abuse or negligence.To
receivefull valuefrom the warranty, the operator must
maintain pressurewasher as instructed in this manual
including proper storage asdetailed in Storage.
Someadjustments will needto bemade periodicallyto
properly maintain your pressurewasher.
All service and adjustments should be madeat least once
eachseason.Follow the requirements in the Maintenance
Schedulechart above.
NOTE:Oncea yearyou should cleanor replacethe spark
plug andreplace the air filter. A new spark plug and clean air
filter assureproper fuel-air mixture and helpyour engine run
better and last longer.
Pump Oil
DONOTattempt any oil maintenance on this pump. The
pump is pre-lubricatedand sealedfrom the factory, requiring
no additional maintenancefor the life of the pump.
NOTICE Improper treatment of pressurewasher can
damageit and shorten its life.
• DONOTinsertanyobjectsthroughcoolingslots.
• Usea soft bristle brush to loosencaked on dirt, oil, etc.
• Usea vacuum cleaner to pick up loosedirt and debris.
Check and Clean Inlet Screen
Examinegarden hoseinlet screen. Cleanif it is clogged or
replaceif it is torn.
Check High Pressure Hose
High pressure hoses candevelop leaksfrom wear, kinking,
or abuse. Inspecthose beforeeach use. Check for cuts,
leaks,abrasions,bulging of cover, or damageor movement
of couplings. If anyof these conditions exist, replacehose
immediately.
_i, WARNING The highpressure stream of water that
and its underlying tissues, leading to serious
this equipment produces can cut through skin
injury and possible amputation.
• NEVERrepairhighpressurehose.Replaceit.
• ReplacementhoseratingMUSTexceedmaximumpressure
ratingof unit.
17
Loading...