Craftsman 580752193 Owner’s Manual

Operator'sIVianual

2550 PSi iViAX

2.3 GPiViMAX

iViodelNo. 580.752193

®

,, Safety

HOURS: IVlon.- Fri. 8 a.m. to 5 p.m. (CTI

,, Assembly
,, Operation

WARHIHG

Beforeusing this product, readthis

manualand follow all Safety Rules

and Operatinginstructions.

This pressure washer is rated in accordance to the Pressure Washer Manufacturers Association
(PWMA) standard PWI01 (Testing and Rating Performance of Pressure Washers).

Esta limpiadora a presiOnest_ clasificada conforme a lanorrna PWl01 (comprobaciOn y clasificaciOn de rendimiento de limpiadoras
a presiOn)de la AsociaciOndefabricantes de bombas a presiOn(Pressure Washer Manufacturers Association, PWMA).

Sears, Roebuckand Co., HoffrnanEstates,IL 50179 U.S.A.

Visit our Craftsman wehsite: www.craftsman.com

Part No. 311255GS Draft - (09/09/2009)

Antes deutilizar el producto, lea este

manualy siga todas las Reglasde

Seguridad eInstrucciones de Uso.

ADVERTENCiA

,, Maintenance
,, Parts

q,EspafioJ,p. 32

3

WARRANTY .......................................... 2

REPAIRPROTECTIONAGREEMENT........................ 2

SAFETYRULES...................................... 3-5

FEATURESAND CONTROLS.............................. 6

ASSEMBLY........................................ 7-10

OPERATION....................................... 11-15

SPECIFICATIONS..................................... 16

MAINTENANCE.................................... 17-20

STORAGE........................................... 21

TROUBLESHOOTING.................................. 22

NOTES............................................. 23

REPLACEMENTPARTS.............................. 24-29

EMISSIONCONTROLWARRANTY..................... 30-31

ESPANOL......................................... 32-55

HOWTO ORDERPARTS........................ BACKPAGE

CRAFTSMANFULLWARRANTY

If this Craftsmanproduct fails due to a defect in material or workmanship within two years from the date of purchase, return it
to anySearsstore, Sears Parts& RepairService Center,or other Craftsman outlet in the United Statesfor free repair (or
replacementif repair proves impossible).

This warranty appliesfor only 90 days from the dateof purchase if this product is ever usedfor commercial or rental
purposes.

Thiswarranty coversOHLYdefects in material andworkmanship.Searswill HOTpayfor:
* Expendableitems that canwear out from normal usewithin the warranty period, such as spray guns, hoses, nozzle

extensions, nozzles,filters and sparkplugs.

. Repairsnecessarybecauseof accident, or failure to operateor maintainthe product according to all supplied instructions.
. Preventivemaintenance,or repairs necessarydueto improper fuel mixture, contaminated or stalefuel.

This warranty givesyou specific legal rights, and you may also haveother rights which vary from state to state.

Sears, Roebuck and Co,, Hoffman Estates, IL 60179

Congratulations onmakinga smart purchase.

Your new Craftsman® product is designed and manufactured
for years of dependableoperation. But like all products, it
may requirerepairfrom time to time. That's when havinga
Repair ProtectionAgreementcan saveyou money and
aggravation.

Here'swhat the RepairProtection Agreement*includes:
* Expertservice by our 10,000 professional repair

specialists

* Unlimited serviceand no chargefor parts and labor on

all coveredrepairs

. Product replacementupto $1500 if your covered

product can't be fixed

. Discount of10% from regular price of serviceand related

installed parts not covered by the agreement; also,10%
off regular price of preventivemaintenance check

* Fasthelp byphone-we caii it Rapid Resolution- phone

support from a Sears representative.Thinkof us as a
"talking owner's manual".

Onceyou purchasethe Repair Protection Agreement,a
simple phonecarlis all it takes for you to schedule service.

You cancall anytimeday or night, or schedule a service

appointment online.

The Repair Protection Agreementis a risk-free purchase. If
you cancelfor any reasonduring the product warranty

period,we will provide a full refund. Or, aprorated refund
anytime after the product warranty period expires. Purchase

your RepairProtectionAgreement today!

Some limitations and exclusions apply. Forpricesand
additional informationin the U.S.A. caii 1-800-827-6655.

* Coverage in Canadavaries on some items. Forfuji

details, caii Sears Canadaat 1-800-361-6665.

SearsInstallation Service

ForSears professional installation of home appliances,
garagedoor openers,water heaters,and other major home

items, inthe U.S.A.or Canadacall 1-S00-4-MY-HOME®.

©2009

Readthis manual carefully and becomefamiliar

with yourpressurewasher. Knowitsapplications,

itslimitations, and any hazardsinvolved.

important Safety I.formation
Safety Symbolsand Meanings

_i, WARNING Theengineexhaust from this product
contains chemicals known to the Stateof California to

cause cancer,birth defects,or other reproductive harm.

_i, WARNING This product contains lead and lead
compounds, known to the State of Californiato cause
birth defects or other reproductive harm. Washyour

handsafter handling this product.

ToxicFumes Kickback

ElectricalShock

2

SlipperySurface Fall

Fire

Explosion Operator'sManual

ih

MovingParts Flying Objects Hot Surface

,& The safetyalertsymbol indicates apotentialpersonal

injury hazard.A signalword (DANGER,WARNING,or
CAUTION)is usedwith the alert symbol to designatea degree
or levelof hazardseriousness. A safetysymbol may be used
to representthe typeof hazard.Thesignal word NOTICEis
usedto addresspractices not relatedto personalinjury.

_i, DANGERindicatesa hazardwhich, if not avoided, will

result in death or serious injury.

_i, WARNINGindicates a hazardwhich, if not avoided, could

result in death or serious injury.

_i, CAUTIONindicates a hazardwhich, if not avoided, could

result in minor or moderate injury.

NOTICEaddress practices not related to personal injury.

ChemicalBurn

FluidInjection

_i, WARNING Runningengine gives off carbon

monoxide, an odorless, colorless, poison gas.

_ Breathingcarbon monoxide headache,

fatigue, dizziness,vomiting, confusion, seizures,

nausea,fainting or death.
Some chemicals or detergentsmay be harmful if inhaled

or ingested, causing severenausea,fainting, or
poisoning.

• OperatepressurewasherONLYoutdoors.

• Keepexhaustgasfromenteringa confinedareathrough

windows,doors,ventilationintakes,or otheropenings.

• DONOTstartorrunengineindoorsorin anenclosedarea,
evenifwindowsanddoorsareopen.

• Usea respiratoror maskwheneverthereisa chancethat
vaporsmaybeinhaled.

• Readall instructionswith masksoyou arecertainthe maskwill
providethenecessaryprotectionagainstinhalingharmful

vapors.

can cause

A. WARNING Starter cord kickback(rapid retraction)can

result in bodily injury. Kickbackwill pull hand and

,_arm toward enginefaster thanyou can let go.

Broken bones,fractures, bruises, or sprains

could result.

• NEVERpullstarter cord without first relieving spraygun
pressure.

• When starting engine, pull cord slowly until resistance isfelt
andthen pull rapidly to avoid kickback.

• After each starting attempt, where enginefails to run, always
point spray gun in safe direction, pressred button and squeeze
spray gun trigger to releasehigh pressure.

• Firmly grasp spray gun with both hands when using high
pressure sprayto avoid injury when spray gun kicks back.

A. WARNING Riskof electrocution.

"_.dh Contactwith power sourcecan causeelectric

shock or burn.

• NEVERspraynearpowersource.

A. WARNING The high pressure stream of water that

and its underlying tissues, leading to serious

this equipment produces can cut through skin

injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.

• DONOTallow CHILDRENto operatepressure washer.

• NEVERrepairhigh pressure hose.Replaceit.

• NEVERrepairleaking connections with sealantof any kind.
Replaceo-ring or seal.

• NEVERconnect high pressurehose to nozzleextension.

• Keep high pressure hoseconnected to pump and spraygun
while system is pressurized.

• ALWAYS pointspray gun in safedirection, press red button
andsqueezespray gun trigger to releasehigh pressure, every

time you stop engine.

• NEVERaim spray gun at people,animals, or plants.

• DO NOTsecure spraygun in open position.

• DO NOTleavespray gun unattendedwhile machineis running.

• NEVERuseaspray gun which does not have atrigger lock or

trigger guard in placeand in working order.

• Always be certain spray gun, nozzlesandaccessoriesare
correctly attached.

A. WARNING Fuel and its vapors are extremely

flammable and explosive.

Fire or explosion can cause severe burns
or death.

WHENADDING OR DRAININGFUEL
* Turn pressurewasher OFFand let it cool at least2 minutes

before removing fuel cap. Loosen capslowly to relievepressure
in tank.

, Fill or drain fuel tank outdoors.
, DONOToverfill tank. Allow spacefor fuel expansion.

, Iffuel spills, wait until it evaporatesbefore starting engine.
, Keepfuel awayfrom sparks, open flames, pilot lights, heat,and

other ignition sources.
, DONOTlight a cigarette or smoke.
WHENSTARTINGEQUIPMENT

* Ensurespark plug, muffler, fuel cap,and air cleanerarein place.
* DO NOTcrank enginewith spark plug removed.

WHENOPERATINGEQUIPMENT
* DONOTtip engine or equipment at anglewhich causes fuelto

spill.
* DONOTspray flammable liquids.
WHENTRANSPORTINGORREPAiRiNGEQUIPMENT
* Transport/repair with fuel tank EMPTYor with fuel shutoff valve

OFF.

* Disconnectspark plug wire.
WHENSTORINGFUELOR EQUIPMENTWITH FUELiN TANK
* Store awayfrom furnaces, stoves,water heaters,clothes

dryers, or other appliancesthat have pilot lightor other ignition

source becausethey can ignitefuel vapors.

A. WARNING Contact with muffler area can result in

serious burns.

_ _ Exhaust heat/gases can ignite

fuel tank causing a fire.

* DO NOTtouch hot parts and AVOIDhot exhaust gases.
* Allow equipmentto cool beforetouching.
* Keepat least5 feet (152 cm) of clearanceon all sides of

pressure washer including overhead.
* it is aviolation of California Public Resource Code,Section

4442, to use or operate the engine on any forest-covered,

brush-covered, or grass-covered land unlessthe exhaust

system is equipped with a spark arrester, as defined in Section

4442, maintained in effective working order. Other states or

federaljurisdictions may havesimilar laws.

Contactthe original equipment manufacturer, retailer, or dealer

to obtain a spark arrester designedfor the exhaust system

installed on this engine.
* Replacement parts must bethe same and installed in the same

position as the original parts.

combustibles, structures or damage

_i, WARNING Use of pressure washer can create

_' Kickback from spray gun can cause you

• Operatepressurewasher from a stablesurface.

• The cleaning areashould haveadequateslopes anddrainageto
reducethe possibility of a fall due to slippery surfaces.

• Be extremely carefulif you must usethe pressurewasherfrom
a ladder, scaffolding, or any other similar location.

• Firmly grasp spray gun with both hands when using high
pressure sprayto avoid injury when spray gun kicks back.

A, WARNING Unintentional sparking can result in fire or

WHENADJUSTINGOR MAKINGREPAIRSTOYOURPRESSURE
WASHER

• Disconnect the spark plugwire from the spark plug and place

the wire where it cannot contact spark plug.

WHENTESTINGFORENGINESPARK

• Use approved spark plugtester.

• DONOTcheck for sparkwith spark plug removed.

puddles and slippery surfaces.
to fall.

_¢ electric shock.

A, WARNING Starter and other rotating parts can

entanglehands, hair, clothing, or accessories.

. NEVERoperatepressurewasherwithoutprotectivehousingor

covers.

. DONOTwearlooseclothing,jewelryor anythingthat maybe

caughtin thestarterorotherrotatingparts.

* Tieuplonghairandremovejewelry.

_i, WARNING Chemical Burn Hazard.

, Chemicalscould cause bodily injury, property

_ damage or death.

• DONOTusecausticliquidwithpressurewasher.

• UseONLYpressurewashersafedetergents/soaps.Followall
manufacturersinstructions.

A, WARNING Riskof eyeinjury.

Spray cansplash back or propel objects.

• Always wear indirect vented (chemical splash) safetygoggles
markedto comply with ANSIZ87.1 when using or in vicinity of
this equipment.

• NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safetygoggles.

NOTICE High pressure spray may damagefragile items
including glass.

• DONOTpointspraygunatglasswhenusingred(0°) spraytip.
= NEVERaimspraygunatplants.

NOTICE Improper treatment of pressure washer can
damage it and shorten its life.

• If you have questions about intended use,ask dealeror contact
Sears.

• NEVERoperate units with broken or missing parts, or without
protective housing or covers.

• DO NOTby-pass any safety deviceon this machine.

• DONOTtamper with governed speed.

• DONOToperate pressure washer above rated pressure.

• DONOTmodify pressure washer in any way.

• Before starting pressure washer in cold weather,check all parts
of the equipmentto besure ice has not formed there.

• NEVERmove machine by pulling on hoses. Use handle provided
on unit.

• Check fuel system for leaks or signs of deterioration, such as
chafed or spongy hose, loose or missing clamps, or damaged
tank orcap. Correct all defects before operating pressure washer.

• This equipment is designedto be used with Searsauthorized parts
ONLY.If equipment is usedwith parts that DONOTcomply with

minimum specifications, userassumesall risks and liabilities.

KNOWYOURPRESSUREWASHER

[_ Readthe Operator's Manual and safetyrules before operating yourpressurewasher.

Comparethe illustrations with your pressurewasherto familiarizeyourself with the locations of various controls and

adjustments. Savethis manual for future reference.

A - Spray Gun-- Controlsthe application of water onto

cleaningsurface with trigger device,includestrigger lock.

B - Spray Tips- Detergent,0°, 15° and 40°: for various

high pressurecleaningapplications.

C- Accessory Tray-- Providesconvenient storage for

accessories, suchas gun, spray tips, etc.

D - Recoil Starter -- Usedfor starting the enginemanually.
E - Fuel Tank -- Fill tank with regular unleadedfuel. Always

leaveroom for fuel expansion.

F - Bottle Bracket -- Cleaningsolution bottle fits inwire

form brackethere. Concentratebottle not included.

G - Warning/Operating Instructions Tag-- identifies hazards

and proper procedureto start/stop pressurewasher.

H - Throttle Lever-- Sets engine in starting mode for recoil

starter and stops a running engine.

J - Air Filter -- Protectsengine by filtering dust and debris

out of intakeair.

K- Automatic Cool DownSystem -- Cycleswater through

pump when water reaches125°-155%. Warm water will
dischargefrom pump onto ground. This system prevents
internal pump damage.

L =Pump -- Developshigh pressure.
M - DetergentSiphoningTube/Filter-- Useto siphon pressure

washersafedetergentsinto thelow pressurestream.

N- High PressureOutlet-- Connectionfor high pressurehose.
P - Water Inlet -- Connectionfor garden hose.

R- Project Pro@ PerfectMW MSiphon -- Mixes concentrate

with pressure washer spray.

S - Oil Fill/Dipstick -- Check,add and drain engineoil here.

T - Fold DownHandle-- Handle and accessorytray fold fiat

atop cold enginefor space-saving storage.

U- Spray Tip Extensionwith QuickConnect-- Allowsyou

to switch betweenfour different spray tips.

V - HoseWrap and HighPressure Hose-- Hosewrap

provides easytransport and handling of the high pressure
hose. Connectone end of hoseto water pump and the
other end to spray gun.

Items Not Shown:
Identification Label (near rear of base plate)-- Provides

model and serial number of pressurewasher. Pleasehave

these readilyavailableif calling for assistance.

Your pressurewasherrequires someassemblyand is ready
for useonly after it has been properly servicedwith the

recommendedoil andfuel.
If you haveany problemswith theassembly of your

pressurewasher, please call the pressurewasher helpline
at 1-800-222-3136.

UNPACKTHEPRESSUREWASHER

1. Removeeverything from carton except pressurewasher,

2. Opencarton completely by cutting each corner from top
to bottom.

3. Removepressure washer from carton.

CARTONCONTENTS

Checkall contents. If anyparts are missing or damaged,call
the pressure washer helplineat 1-800-222-3136.

* Main Unit
* Handle

* AccessoryTray
* High PressureHose
* Spray Gun
* SprayTip Extensionwith Quick ConnectFitting

* Oil Bottle
* HoseWrap

* DetergentSiphoning Hose/Filter
* Bottle BracketWireform

* PerfectMixTM Siphoning Unit/Hose
* Parts Bag(which includes the following):

* Operator's Manual
* Owner's Registration Card
* Bag containing 4 multi-colored Spray Tips
* HandleFasteningHardwareKit (whichincludes):

* Handle Bolts (2)
* Carriage Bolt (1)

* Plastic Knobsfor Handle(2)
* Rope Guide(1)
* Plastic Knob(2)

* Tree Clips(4)

Becomefamiliar with eachpiece beforeassembling the
pressure washer, identify all contents with the illustration on
page 6. if any partsare missing or damaged,call the
pressure washerhelpline at1-800-222-3136.

6. Connectpressure hoseto spray gun and pump.

7. Connectwater supply to pump.

8. Attach spray tip extension to spray gun.

9. Select/attach quick connect spray tip to spray tip
extension.

Attach Handle and Accessory Tray

1. Placehandle(A) onto handle supports (B) connectedto
main unit. Make sure holes (C) in handlealign with holes
(C) on handlesupports.

.

insert handlecarriagebolts (D) through holes from
inside of unit and attach a plastic knob (E) from outside
of unit. Tighten by hand. Byloosening both knobs to the
middle section of the attachmentbolt, the upper handle
canfold forward to store fiat atop the cold engine.

NOTICE DONOTfold the handle down while the engine is
hot.

3. Placeaccessory tray (F) over holes (G) on handle
(viewing from backof unit). Push the tree clips (H) into

the holes until they sit fiat againstthe accessorytray.

ASSEMBLINGPRESSUREWASHER

Your Craftsmanpressure washer will needassembly before
operation:

1. Fill out and send in registration card.

2. Attach handle and accessorytray.

3. Connectdetergent siphon hoseto pump.

4. Add oil to engine crankcase.

5. Add fuel to fuel tank.

/

,

insert multi-colored Quick Connectspraytips andother
supplied accessoriesinspaces provided in accessory

tray. SeeHow to UseAccessory Tray.

.

Attach rope guide (A) through handlewith plastic knob
(B). Tighten by hand. Routeenginerecoil ropethrough
guide.

.

Align hosewrap (O)to the back side of accessorytray.
Locate notch with "unlock" icon (D) on hose wrap.
Position notch at top with hose wrap in vertical position.
Clips in the back of accessorytray should slide into the
grooves on the inside surface of hosewrap. Slide hose
wrap on back of accessorytray and rotate 1/8 turn until
"locked"icon (E) is in vertical position. Hosewrap is
easily removedfrom the accessorytray for wrapping and
unwrapping of the high pressure hose. Aclip to secure
the hoseon the reel makesit easyto wrap the hose
while it is detachedfrom the accessorytray.

StandardSiphonTube

Cleartube with filter:

When using the clear siphon tube, dilute

1 part PerfectlViWMExtremeConcentrate

to 16 parts water (4 oz of concentrate

makes1/2 gallon of mix.)

Attach Project Pro® PerfectMix TM Siphon to

Pump

Attach the hose end of the blue PerfectMWMSiphon (J) to
the barbed hosefitting (K) on the pump.

Attach PerfectMix TM Detergent Siphon to

Concentrate Bottle

PlacePerfectMixTM bottle (not included) in the wire-form
bracketon the handle. Removecap from bottle and insert the

PerfectMixTM Siphon (L). Screwthe siphon unit to the top of
the bottle (IVi).Usethe clip on the cap (L) to snapsiphon to
wire form bracket when siphon is not in a concentrate bottle.

.

Attach bottle bracket(F) to handle with carriage bolt (6)
and blackplastic knob (H). Tighten by hand.

2-1N-1 Soap System

The pressurewasher is equippedwith two detergent
siphoning hoses.

Project ProPerfectMix TM Siphon

Blue tube with blue bottle cap:

._ When usingthe blue PerfectMixTM siphon, use

,' the PerfectMixTM ExtremeConcentratestraight

from the bottle.

®

Add Engine Oil

1. Placepressurewasher on a flat, level surface.

2. Cleanareaaround oil fill and removeyellow oil fill
cap/dipstick.

3. Using oil funnel (optional), slowly pour contents of
provided oil bottle into oil fill opening.

NOTICE Improper treatment of pressure washer can
damage it and shorten its life.

• DONOTattempt to crank or startthe engine before it has been
properly servicedwith the recommended oil. This may result in an
enginefailure.

4. Replaceoil fill cap/dipstick and fully tighten.

AddFuel

Fuel mustmeet these requirements:
* Clean,fresh, unleaded gasoline.
* A minimum of 87 octane/87 AKI (91 RON).High altitude

use, see HighAltitude.

, Gasolinewith up to 10% ethanol (gasohol) or up to 15%

MTBE (methyl tertiary butyl ether) is acceptable.

NOTICE Avoid pressure washer damage.
Failureto follow Operator's Manual for fuel
recommendations voids warranty.

• DONOTuseunapprovedgasolinesuchasE85.

• DONOTmixoil in gasoline.

• DONOTmodifyengineto runonalternatefuels.

To protect the fuel system from gum formation, mix in a fuel
stabilizerwhen adding fuel. SeeStorage.All fuel is not the

same. If you experiencestarting or performanceproblems
after using fuel, switch to a different fuel provider or change
brands. This engine is certified to operate on gasoline. The
emission control system for this engine is EM (Engine
Modifications).

_i, WARNING Fueland its vapors are extremely

flammable and explosive.

Fireor explosion can causesevere burns

or death.

WHENADDINGFUEL

• Turn pressurewasherOFFand let it cool at least2 minutes
before removing fuel cap. Loosen capslowly to relievepressure

in tank.

• Fill fuel tank outdoors.

• DONOToverfill tank. Allow spacefor fuel expansion.

• If fuel spills, wait until it evaporatesbefore starting engine.

• Keepfuel awayfrom sparks, open flames, pilot lights, heat,and
other ignition sources.

• DONOTlight a cigarette or smoke.

CAUTION!Alcohol-blendedfuels (calledgasohol,ethanol or
methanol) canattract moisture, which leadsto separation and

formation of acids during storage.Acidic gascandamagethe
fuel system of an enginewhile in storage.

To avoid engine problems, the fuel system should be treated
with a fuel preserveror emptied beforestorage of 30 days or

longer, if adding a fuel preserver,fill the fuel tank with fresh
fuel. if only partially filled, air in the tank will promote fuel
deterioration during storage. If fuel preserver is not used,
drain the fuel tank, start the engine and let it run until the fuel

lines and carburetor are empty. Usefresh fuel next season.
See Storagefor additional information.

NEVERuse engine or carburetor cleaner products in the fuel
tank as permanent damagemay occur.

HighAltitude

At altitudes over 5,000 feet (1524 meters), a minimum
85 octane/ 85 AKi (89 RON)gasolineis acceptable.To

remainemissions compliant, high altitude adjustment is

required. Operationwithout this adjustment wiii cause
decreasedperformance, increasedfuel consumption, and

increasedemissions. Seea qualified Sears dealerfor high
altitude adjustment information. Operationof the engine at
altitudes below 2,500 feet (762 meters) with the high altitude

kit is not recommended.

FreshStart® Fuel Cap

The FreshStart® fuel cap (B) is designedto hold a
cartridge (E) which contains fuel preserver. Adding fuel

preserver helps keepfuel fresh and carburetors cleanfor
easier starting all season long. The FreshStart® fuel cap, if
equipped with a cartridge, automatically drips concentrated
fuel preserver into your fuel tank so you don't haveto add it

'ourself.

.

Cleanarea around fuel fill cap, removecap.

2.

Slowly add regularunleadedfuel (A) to fuel tank (B). Be
careful not to overfill. Allow about 1.5" (4 cm) (C) of tank
spacefor fuel expansion.

3. Install fuel capand wait for any spilled fuel to evaporate.

NOTICE FreshStart®fuel preserver cartridge is availableas
an optional accessory, retail item 7133386. it is not included
with the pressure washer. Contactthe original equipment

manufacturer, retailer, or dealerto obtain acartridge
designed for the FreshStart® fuel cap installed on this
engine.

Readand follow all instructions and warnings given in the

FreshStart® fuel preserver cartridge package.

Connect Hose and Water Supply to Pump

NOTICE DONOTrun the pump without the water supply
connectedand turned on.

= Damagetoequipmentresultingfromfailureto followthis

instructionwill voidwarranty.

4. Runwater through garden hosefor 30 secondsto flush

it of debris. Turn off water.

NOTICE DONOTsiphon standing water for the water

supply. Use ONLYcold water (lessthan 100°F).

5. Connectgarden hose(not to exceed50 feet in length) to
water inlet. Tightenby hand.

NOTICE Removeand discard the shipping caps from the
pump's high pressure outlet andwater inlet before attaching

hoses.

1. Uncoil high pressurehose andattachone end of hoseto
baseof spray gun. Tighten by hand.

_i, WARNING The high pressure stream of water that

and its underlying tissues, leading to serious

this equipment produces can cut through skin

injury and possible amputation.

• NEVERconnect high pressurehose to nozzleextension.

• Keep high pressure hoseconnected to pump and spraygun
while system is pressurized.

• Always becertain spray gun, nozzlesand accessoriesare
correctly attached.

2. Attach other end of high pressure hoseto high pressure
outlet on pump. Tighten by hand.

NOTICE Using aOneWay Valve (vacuumbreakeror check

valve) at pump inlet can cause pump or inlet connector

damage.

• ThereMUSTbeat leasttenfeetofunrestrictedgardenhose
betweenthepressurewasherinletandanydevice,suchasa

vacuumbreakeror checkvalve.

• Damageto equipment resulting from failure to follow this
instruction will void warranty.

A, WARNING Riskof eyeinjury.

Spray cansplash back or propel objects.

• Always wear indirect vented (chemical splash) safetygoggles
markedto comply with ANSIZ87.1 when using or in vicinity of
this equipment.

• NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safetygoggles.

6. Turn ONthe water, press red button (B) on the gun and
squeezethe trigger to purge the pump system of air and
impurities.

.

Beforeconnecting gardenhoseto water inlet, inspect
inlet screen (A). Cleanscreenif it contains debris or have
it replacedif damaged.DO NOTrunpressurewasher if
inlet screenis damaged or missing.

Checklist Before Starting Engine

Reviewthe unit to ensureyou haveperformed all of the

following:

1. Besure to read SafetyRules and Operationsections
before using the pressure washer.

2. Makesure handleis in placeand secure.

3. Checkthat oil has beenadded to proper levelin engine
crankcase.

4. Add properfuel to fuel tank.

5. Checkfor proper hoseconnections (high pressureand

water supply) andthat there areno kinks, cuts, or

damageto the high pressure hose.

6. Provide proper water supply (not to exceed100%).

10

HOWTOUSEYOURPRESSUREWASHER

If you haveanyproblems operating your pressure washer,
pleasecall the pressure washer helplineat 1-800-222-3136.

PressureWasherLocation

PressureWasherCJearance

_lLWABNING Exhaustheat/gases can ignite

combustibles, structures or damagefuel tank
causing afire.

• Keepat least5 ft. (152 cm) clearanceon all sides of pressure
washer including overhead.

Placepressure washer outdoors in an areathatwill not
accumulate deadlyexhaustgas. DONOTplacepressure
washer where exhaustgas (A) could accumulate and enter
inside or be drawn into a potentially occupied building.
Ensureexhaust gas is kept awayfrom any windows, doors,
ventilation intakes, or other openingsthat can allow exhaust
gasto collect in aconfined area. Prevailingwinds and air
currents should betakeninto considerationwhen positioning

_ressurewasher.

_i, WARNING Runningenginegives off carbon

monoxide,an odorless, colorless, poisonous gas.

_ Breathing cancause headache,

fatigue, dizziness,vomiting, confusion, seizures,

nausea,fainting or death.

• OperatepressurewasherONLYoutdoors.

• Keepexhaustgasfromenteringa confinedareathrough

windows,doors,ventilationintakes,or otheropenings.

• DONOTstartorrunengineindoorsor in anenclosedarea,
evenifwindowsanddoorsareopen.

carbon monoxide

To Start YourPressureWasher

To start your engine-powered pressurewasher for the first
time, follow these instructions step-by-step. This information

alsoapplies wheneveryou start the engine afteryou havelet

the pressure washer sit idlefor at leasta day.

1. Placepressurewasher outside nearan water source
capableof supplying water at a flow rate greater than

3.3 gallons per minute and no less than 20 PSi at
pressurewasher endof garden hose.

2. Checkthat high pressure hose is tightly connectedto
spray gun and pump. SeeAssembly for illustrations.

3. Makesure unit is in a levelposition.

4. Connectgarden hoseto water inlet on pressurewasher
pump.

NOTICE DONOTrun the pump without the water supply
connectedand turned on.

• Damageto equipmentresultingfromfailureto followthis

instructionwill voidwarranty.

.

Turn ONthe water, press red button on the gun and

squeezethe trigger to purge the pump system of air and
impurities.

.

Attach spray tip extension to spray gun. Tighten by

hand.

.

Choosespray tip you want to use and insert it into spray

tip extension. See How to Use Spray Tips.

.

Move throttle leverto "Fast" position (B), shown asa
rabbit.

11

NOTICE Beforestarting the pressurewasher, be sure you
are wearing safety goggles asdescribed below.

_i, WARNING Riskof eyeinjury.

Spraycan splash backor propel objects.

• Always wear indirect vented (chemical splash) safetygoggles
markedto comply with ANSIZ87.1 when using or invicinity of

this equipment.

• NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safetygoggles.

NOTICE This unit is equipped with a ReadyStart® engine. A
ReadyStart® engine means there is no priming or choking
required.

9. Whenstarting engine, position yourself as
recommendedand grasp starter grip handle andpull
slowly until you feel some resistance.Then pull rapidly
to start engine.

_i, WARNING The high pressure stream of water that

this equipment produces can cut through skin
and its underlying tissues, leading to serious

injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.

• DONOTallow CHILDRENto operatepressure washer.

• Keep high pressure hoseconnected to pump and spraygun
while system is pressurized.

• NEVERaim spraygun at people,animals, or plants.

• DO NOTsecure spray gun in open position.

• DO NOTleavespray gun unattendedwhile machineis running.

• NEVERuse aspray gun which does not havea trigger lock or
trigger guard in place andin working order.

• Always be certain spray gun, nozzlesand accessoriesare
correctly attached.

_i, WARNING Contact with muffler area can result in

serious burns.

_ heat/gases can ignite

fuel tank causing a fire.

• DO NOTtouch hot parts andAVOIDhot exhaust gases.

• Allow equipment to cool beforetouching.

• Keep at least5 feet (152 cm) of clearanceon all sides of
pressure washer including overhead.

• It isa violation of California PuNic ResourceCode, Section
4442, to use or operatethe engine on any forest-covered,
brush-covered, or grass-covered land unlessthe exhaust
system is equippedwith a spark arrester,as defined in Section
4442, maintained ineffective working order. Otherstates or
federaljurisdictions may havesimilar laws.

Contactthe original equipment manufacturer,retailer, or dealer
to obtain a spark arrester designedfor the exhaustsystem
installed onthis engine.

• Replacementparts must bethe same and installed in the same
position as the original parts.

Exhaust
combustibles, structures or damage

A. WARNING Starter cord kickback (rapid retraction) can

result in bodily injury. Kickback will pull hand and

_,_ arm toward engine faster than you can let go.

Broken bones, fractures, bruises, or sprains

could result.

• NEVERpullstarter cord without first relieving spraygun
pressure.

• When starting engine, pull cord slowly until resistance isfelt
andthen pull rapidly to avoid kickback.

• After each starting attempt, where enginefails to run, always
point spray gun in safe direction, pressred button and squeeze
spray gun trigger to releasehigh pressure.

• Firmly grasp spray gun with both hands when using high
pressure sprayto avoid injury when spray gun kicks back.

0. Return recoil starter slowly. DONOT let rope "snap
back" against starter.

NOTICE Always keepthe throttle leverin the "Fast" position
when operating the pressure washer.

Howto Stop Your Pressure Washer

1. Release spray gun trigger and let engine idle for two
minutes.

.

Movethrottle to SLOWposition, then STOPposition.

3.

ALWAYSpoint spray gun in asafedirection, push red

button andsqueezespray gun trigger to releaseretained
high water pressure.

_i, WARNING The high pressure stream of water that

and its underlying tissues, leading to serious

this equipment produces can cut through skin

injury and possible amputation.

Spray gun traps high water pressure,evenwhen engineis
stopped andwater is disconnected, which can cause

injury.

• Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.

• ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntriggerto releasehighpressure,every
timeyoustopengine.

12

NOTICE Spraygun traps high water pressure,evenwhen
engine is stopped and wateris disconnected.

How to Use Accessory Tray

The unit is equipped with an accessory traywith places to
store your spray gun, spray tip extension and quick connect
spray tips. Thereis also a detachablehosewrap at the back
of the accessory tray to hold your highpressure hose.

1. Placespray tip extension in clip on back of accessory
tray.

2. Placespray gun through hole on accessorytray on right
side of unit.

3. insert multi-colored spray tips in spacesprovided in
accessorytray.

4. Wrap high pressure hoseon hosewrap then attach hose
wrap to back of accessorytray.

5. Hook providedon back of accessory trayfor safely
storing safety goggles.

How to Use Spray Tips

The quick-connect on the spray tip extensionallows you to
switch betweenfour different quick connect spray tips. The

spray tips vary the spray patternas shown below.

Low Pressure

Black

Useto apply

chemical

Foflowthese instructionsto chanoespraytips:

1. Pull backcollar on quick-connect and pull current spray
tip off. Store spray tips in holder provided on the
accessorytray.

A WARNING The high pressure stream of water that

this equipment produces can cut through skin
and its underlying tissues, leading to serious

injury and possible amputation.

• NEVERexchangespraytipswithoutthetriggerlockedonthe
spraygun.

• DONOTtwist spraytips whilespraying.

2. Select desiredspray tip:

• For delicate rinse(lower pressure and higher flow),
for gentlecleaning of cars/trucks, boats, RV's, patio
furniture, lawn equipment, etc., select white 40°
spray tip.

• For generalrinsing (medium pressure and medium
flow), ideal for most all purpose cleaning such as
home siding, brick patios, wood decks, driveways
and sidewalks, garagefloors, etc., selectyellow
15° spray tip.

• For maximum rinsing (higher pressure and lower
flow), for stubborn or hard to reach surfacesuch as
second story surfaces, paint removal,oil stains, rust
removal or other stubborn substances(tar, gum,
grease,wax, etc.), select red 0° spray tip.

• To apply detergent, applies project specific cleaners
to help breakdown stubborn dirt and grime on a
variety of surfaces, select black detergentspray tip.

3. Pull backoncollar,insert newspraytip and releasecollar.
Tugon spraytip to makesureit is securelyinplace.

UsageTips

* For most effective cleaning, keepspray tip from 8to

24 inches(20 to 61 cm) awayfrom cleaning surface.

* If you get spray tip too close, especially using a high

pressure spray tip, you may damagesurface being
cleaned.

* DONOTget closer than 6 inches (15 cm) when cleaning

tires.

2-1N-1 Soap System

A WARNING ChemicalBurn Hazard.

40° White

1750 PSi

2.3 GPM

High Pressure

m i

15° Yellow

2200 PSi

2.2 GPM

F-----q

0° Red

2550 PSi

2.0 GPM

_ hemicals could cause bodily injury, propertydamageor death.

• DONOTusecausticliquidwith pressurewasher.

• UseONLYpressurewashersafedetergents/soaps.Followall
manufacturersinstructions.

Cleaningand ApplyingDetergentwith the
Project Pro@ PerfectMix TM Siphon

To apply undiluted detergent using the blue
PerfectMixTM siphon, follow these steps:

1. Reviewuse of spray tips.

2. Attach PerfectMixTM siphon hoseto pump
and PerfectMixTM concentrate bottle.

13

NOTICE Contact with the hot muffler can damage detergent
siphoning tube.

• When inserting the siphon into a detergent solution bottle, route
the tube so as to keepit from inadvertently contacting the hot

muffler.

3. Make sure black detergentspraytip is installed.

NOTICE Detergentcannot be applied with the high pressure
spray tips (White, Yellow or Red).

4. Make sure garden hose is connected to water inlet.

Checkthat high pressure hoseis connected to spray gun
and pump.Turn on water.

NOTICE You must attach all hoses before you start the
engine.

• Starting the engine without all the hosesconnected and without
the water turned ONwill damagethe pump.

• Damageto equipment resulting from failure to follow this
instruction will void warranty.

5. Start enginefollowing instructions How to Start Your

Pressure Washer.

6. Apply detergent to a dry surface, starting at lower

portion of areato be washedand work upward, using
long, even,overlapping strokes.

7. Allow detergent to "soak in"for 3-5 minutes before

washing andrinsing. Reappiyas neededto prevent
surfacefrom drying. DO NOTallow detergentto dry on
(prevents streaking).

Cleani.g andApplyingDetergent with
the Sta.dard Clear Siphon

To applydiluted detergent using the
standard clear siphon tube, follow these
steps:

1. Reviewuse of spray tips.

2. Attach clearsiphon hoseto barbed fitting on pump.

3. Mix detergentsolution as required by job.

4. Placesmall filter end of clear siphoning tube into

container with diluted solution as describedabove.

NOTICE DONOTinsert standard siphon hosein Extreme
Concentrate.Failureto dilute concentratewill cause excessive

application andconsumption of solution.
NOTICE Make surethe filter is fully submerged in fluid

while applying solution.

NOTICE Contact with the hot muffler can damage detergent
siphoning tube.

• When inserting the siphon into a detergent solution bottle, route
the tube so as to keepit from inadvertently contacting the hot

muffler.

6. Makesure garden hoseis connectedto water inlet.
Checkthat high pressure hose is connectedto spray gun
and pump. Turn on water.

NOTICE You must attach all hoses before you start the
engine.

• Starting the engine without all the hoses connected andwithout
the water turned ONwill damagethe pump.

• Damageto equipment resulting from failure to follow this

instruction will void warranty.

.

Start enginefollowing instructions How to Start Your

Pressure Washer.

8.

Apply detergentto a dry surface, starting at lower

portion of areato be washed andwork upward, using
long, even, overlappingstrokes.

9. Allow detergent to "soakin" for 3-5 minutes before
washing and rinsing. Reapplyas neededto prevent

surfacefrom drying. DONOTallow detergent to dry on
(prevents streaking).

NOTICE You must flush the detergent siphoning system
after eachuse by placing the filter into a bucketof clean

water, then run the pressurewasher in low pressure for 1-2

minutes.

PressureWasherRinsing

ForRinsing:

1. Removeblack detergent spray tip from spray tip

extension.

2. Select andinstall desiredhigh pressurespray tip
following instructions How to UseSpray Tips.

3. Keepspray gun a safe distancefrom areayou plan to

spray.

A. WARNING Kickback from spray gun can cause you to

. fall.

• Operatepressure washer from a stable surface.

• Be extremely careful if you must usethe pressure washer from
a ladder, scaffolding, or any other similar location.

• Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury when spray gun kicks back.

4. Apply a high pressure sprayto a small areaandthen
checksurface for damage. If no damageis found, you
canassume it is okay to continue rinsing.

5. Start at top of areato be rinsed, working down with
sameoverlapping strokes asyou usedfor cleaning.

5. Make sure black detergentspraytip is installed.
NOTICE Detergentcannot be applied with the high pressure

spray tips (White, Yellow or Red).

14

Cleaning Detergent Siphoning Tube

If you usedthe clear detergent siphoning tube, you must
flush it with cleanwater before stopping the engine.

1. Placedetergent siphoning tube/filter in a bucket fuji of
cleanwater.

2. Removehigh pressure spray tip from spray tip
extension.

3. Selectand install blackdetergentspraytip following
instructions How to UseSpray Tips.

4. Flush for 1-2 minutes.

5. Shut off engine following instructions How to Stop
Pressure Washerandturn off water supply.

6. ALWAYSpoint spray gun in asafedirection push red
button andsqueezespray gun trigger to releaseretained

high water pressure.

NOTICE Spray gun traps high water pressure,evenwhen
engine is stopped andwater is disconnected.

_i, WARNING The high pressure stream of water that

and its underlying tissues, leading to serious

this equipment produces can cut through skin

injury and possible amputation.

Spray gun traps high water pressure,evenwhen engineis
stopped andwater is disconnected, which can cause

injury.

• Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.

• ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntriggerto releasehighpressure,every
timeyoustopengine.

AutomaticCoolDownSystem{Thermal Relief)

If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circulating water in the pump can reachtemperatures above
125°F.The systemengagesto cool the pump by discharging

the warm water onto the ground.

15

ENGINETECHNICALiNFORMATiON

This Jsa sJngJecyJJnder,L-head,air cooJedengine.JtJsaJow

emissionsengine.
IntheStateof California,Model120000enginesarecertified

by the California Air Resources Boardto meet emissions
standardsfor 125 hours. Such certification does not grant

thepurchaser,owneror operatorofthis engineany
additionalwarrantieswith respecttotheperformanceor

operational Hfeof this engine.Theengine is warranted solely
according to the productand emissions warranties stated

elsewherein this manual.

Power Ratings

Thegross power rating for individualgas engine models is
labeled in accordancewith SAE(Society of Automotive
Engineers)code J1940 (Small Engine Power & Torque
Rating Procedure),andrating performance has been

obtained and corrected in accordancewith SAEJ1995
(Revision 2002-05). Torquevalues are derived at 3060 RPM;

horsepower valuesarederived at 3600 RPM.Actualgross
engine power will be lower and is affected by, among other
things, ambient operating conditions and engine-to-engine
variability. Givenboth the wide array of products on which
enginesare placed andthe variety of environmental issues
applicableto operatingthe equipment,the gas engine will not
developthe ratedgross power when used in a given pieceof
power equipment (actual "on-site"or net power). This
difference is due to a variety of factors including, but not
limited to, accessories(air cleaner, exhaust, charging,
cooling, carburetor, fuel pump, etc.), application limitations,
ambient operating conditions (temperature, humidity,
altitude), and engine-to-enginevariability. Dueto
manufacturing andcapacitylimitations, Briggs & Stratton
may substitute an engine of higher ratedpower for this
Seriesengine.

This pressurewasher is rated in accordanceto the Pressure
Washer ManufacturersAssociation (PWMA) standard PW101
(Testing and Rating Performanceof PressureWashers).

PRODUCTSPECiFiCATIONS

Pressure Washer Specifications

Max Outlet Pressure ....................... 2,550 PSi

Max FlowRate............................. 2.3 GPM

DetergentMix ........................ Use asdirected

Water SupplyTemperature .......... Notto exceed100%

Engine Specifications

Bore ................................. 2.69 in. (68ram)

Stroke ............................... 2.04 in. (52ram)

Displacement ........................ 11.57in. (190cc)

SparkPlug

Type:............... Briggs & Stratton 802592 or 5095

SetGapTo: ...................... 0.030inch(0.76mm)

ArmatureAir Gap:........... 0.006-0.010in.(0.15-0.25mm)

Valveclearancewithvalvesprings installedand piston 1/4 in.

(6 mm) pasttop deadcenter(checkwhen engineiscold).

Intake.................... 0.005-0.007in.(0.13-0.18mm)

Exhaust .................. 0.007-0.009in.(0.18-0.23mm)

FuelCapacity............................... 1.6Quarts

0il Capacity........................ 18 Ounces(0.5 liter)

flOTICE Forpractical operation,the engineload should not
exceed85% of rated power. Enginepower will decrease
3-1/2% for each1,000 feet (300 meters) above sealeveland
1% for each 10° F(5.6° C) above77° F (25° C). It should
operatesatisfactorily at an angle upto 15°.

16

OWHER'SRESPOHSIBILITIES

Follow the hourly or calendarinteHals,whichever occurs
first. More frequent service is required when operating in

adverseconditions noted below.

* Changeengine oil

* Check/clean water inlet screen'

Checkhigh pressure hose
Checkdetergent siphoning hose
Checkspray gun and assembly for leaks

Cleandebris
Checkengine oil level

Serviceengine air cleaner2

Changeengine oiF
Inspect muffler and spark arrester

Servicespark plug

Emissions Control

Maintenance, replacement,or repair of the emissions

controldevices and systemsmay be performedbyany non-

roadengine repair establishment or individual. However,

to obtain "no charge" emissions control service, the work

must be performed by a factory authorizeddealer. Seethe

Emissions Warranty.

Before Each Use

1. Checkengine oil level.

2. Cleandebris.

3. Checkwater inlet screenfor damage.

4. Checkhigh pressure hose for leaks.

5. Checkgun and spray tip extension assemblyfor leaks.

6. Purge pump of air and contaminants.

PRESSUREWASHERMAINTENAHCE

Clean Debris

Daily or before use, cleanaccumulateddebris from pressure
washer. Keeplinkage, spring and controls clean. Keeparea
around andbehind muffler free from any combustible debris.

Inspect cooling air slots and openings on the pressure
washer. Theseopenings must be kept clean and

unobstructed.

Pressurewasher parts should be kept cleanto reducethe

risk of overheating and ignition of accumulated debris.
* Usea damp cloth to wipe exterior surfaces clean.

Cleancooling systeW

' Clean if clogged. Replace if perforated or torn.
2Service more often under dirty or dusty conditions.

GeneralRecommendations

Regularmaintenance will improve the performanceand
extendthe life of the pressurewasher. Seeany Searsor

other qualified service dealerfor service.
Thepressure washer warranty does not cover items that

havebeensubjected to operator abuse or negligence.To
receivefull valuefrom the warranty, the operator must
maintain pressurewasher as instructed in this manual
including proper storage asdetailed in Storage.

Someadjustments will needto be made periodically to
properly maintain your pressurewasher.

All service and adjustments should be madeat least once
eachseason. Followthe requirementsin the Maintenance

Schedulechart above.
NOTICE Oncea yearyou should clean or replace the spark

plug andreplacethe air filter. A new spark plug and clean air
filter assureproper fuel-air mixture and helpyour engine run
better and last longer.

Pump Oil

DONOTattempt any oil maintenance onthis pump. The
pump is pre-iubricatedand sealedfrom the factory, requiring
no additional maintenancefor the life of the pump.

NOTICE Improper treatment of pressurewasher can

damageit and shorten its life.

• DONOTinsertanyobjectsthroughcoolingslots.

* Usea soft bristle brush to loosencakedon dirt, oil, etc.

* Usea vacuum cleanerto pick up loosedirt and debris.

Checkand CleanInlet Screen

Examinegarden hoseinlet screen. Cleanif it is clogged or

replaceif it is torn.

Check High Pressure Hose

High pressure hoses candevelop leaksfrom wear, kinking,
or abuse. Inspecthose beforeeachuse.Checkfor cuts,

leaks,abrasions, bulging of cover, or damage or movement
of couplings. If anyof these conditions exist, replacehose

immediately.

_lLWARNING The high pressurestream of water that

and its underlying tissues, leading to serious

this equipment produces can cut through skin

injury and possible amputation.

• NEVERrepairhighpressurehose.Replaceit.

• ReplacementhoseratingMUSTexceedmaximumpressure
ratingof unit.

17