Craftsman 50347, 50364 Operator's Manual

Operator's Manual

Hydraulic
Body Repair Kits

Models 50364 - 4 Ton Capacity

50347 - 10 Ton Capacity

• Safety

• Operation

• Maintenance

• Parts

CAUTION: Before using this product, read
this manual and follow all its Safety Rules
and Operating Instructions.

( 50347 shown)

ATENCIÓN: Leer, comprender, y
seguir las instrucciónes antes de utilizar
el aparato. El manual de instrucciónes y
la información de seguridad deben
estar comunicado en lengua del
operador antes del uso. No seguir
estas indicaciónes puede causar
daños personales o materiales.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

www.sears.com/craftsman

Part No. 50347-M0 Printed in China 06/05

© Sears, Roebuck and Co.

TABLE OF CONTENS

Warranty
Save These Instuctions
Product Description & Specifications
Safety Instructions
Operation
Maintenance
Troubleshooting

......P2

......P2

......P3

......P3

......P6

......P6

......P8

WARRANTY

FULL ONE YEAR WARRANTY

For one year from the date of purchase, if this product fails due to a defect in material or workmanship, Sears will
repair it free of charge. Call 1-888-332-6419 for the location of the nearest authorized repair center.

This warranty applies only while this product is used in the United States. Warranty is void if product is leased or
rented.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179

SAVE THESE INTRUCTIONS

For your safety, read and understand the information contained within.
The owner and operator shall have an understanding of this product and safe operating procedures before
attempting to use this product. Instructions and Safety information shall be conveyed in the operators native
language before use of this product is authorized. Make certain that the operator thoroughly understands the
inherent dangers associated with the use and misuse of the product. If any doubt exists as to the safe and
proper use of this product as outlined in this manual, remove from service immediately.

Inspect before each use. Do not use if broken, bent, cracked or otherwise damaged parts are noted. If any
component of this product has been or suspected to have been subjected to a shock load (a load dropped
suddenly, unexpectedly upon it), discontinue use until checked out by Sears or qualified service center. Owners
and operators of this equipment shall be aware that the use and subsequent repair of this equipment may
require special training and knowledge. It is recommended that an annual inspection be done by qualified
personnel and that any missing or damaged parts, decals, warning / safety labels or signs be replaced with
factory authorized replacement parts only. Any component of this Repair Kit that appears to be damaged in any
way, is worn or operates abnormally shall be removed from service immediately until such time as it can be
repaired/replaced. Labels and Operator's Manuals are available from Sears (see PARTS section on page 8 & 9).

© Sears, Roebuck and Co.2

PRODUCT DESCRIPTION

CRAFTSMAN Hydraulic Body Repair Kits are designed to be used for pushing, spreading, and pressing of
vehicle body panels as well as various component parts and assemblies. A variety of attachments are included.
Pumps are rated from 8,000 to 10,000 PSI. Rams are rated from 4 to 10 tons. WARNING: when extension
tubes and/or offset attachments are used, the rated capacity is always reduced by 50% for each tube or

offset attachment connected. See Parts Section for identification of offset attachments.

SPECIFICATIONS

Model

Closed Height Extended Height
50364 4 Ton 11" 15 3/4" 14 46 lbs
50347 10 Ton 13 5/8" 19 3/4" 13 88 lbs

Oil Filler

Screw

Hose

Ram

Handle

Hose

Coupler

Release Valve

SPECIFICATIONS

Dust Cover

Number of

Attachments

Ram Plunger

Ram Coupler

WeightCapacity

Figure 1 - Model No. 50364 & 50347 Components

SAFETY INSTRUCTIONS

BEFORE USE (Refer to Figure 1 above)

1. Study, understand, and follow all instructions provided with and on
this device before use.

2. Inspect before each use. Do not use if bent, broken, leaking or
damaged components are noted.

3. Ensure that product and application are compatible.

4. Check to ensure that all parts of your kit are included (see
illustration and parts list).

5. Carefully remove the dust covers and plugs from hose coupler and
ram coupler.

6. Connect hose coupler to ram coupler, ensure that there are no fluid
leaks.

7. Locate and open release valve. Pump handle a few strokes to
purge air from system. Close release valve and pump handle until
ram is fully extended, then open release valve until ram has fully
retracted.

8. With ram fully retracted and release valve open, place pump in
horizontal position. Locate and open oil filler screw (on reservoir
body, near the back). This will release air trapped within the
reservoir. Retighten the oil filler screw.

3

ATENCIÓN

• Leer, comprender, y seguir las
instrucciónes antes

de utilizar el aparato.

• El manual de instrucciónes y la
información de

seguridad deben estar comunicado

en lengua del

operador antes del uso.

• No seguir estas indicaciónes
puede causar daños

personales o materiales.

© Sears, Roebuck and Co.