Craftsman 50182 User Manual

Operators Manual

JACK STANDS

Model 950182 - 2-1/4 Ton Capacity per pair

•Safety

• Assembly

•Operation

BEFORE using this product, read this manual

!

and follow all its Safety and Operating
instructions. Failure to do so may result in
personal injury and/or property damage.

Sears, Roebuck and Co., Hoffman Estates, IL 60179
Visit our Craftsman website: www.sears.com/craftsman

Printed in China

TABLE OF CONTENTS

Warranty .....P. 2

Save these instructions .....P. 2

Safety instructions .....P. 3

Assembly .....P. 3

Operation .....P. 4

Maintenance .....P. 4

Service .....Back cover

WARRANTY

CRAFTSMAN ONE YEAR FULL WARRANTYRAFTSMAN ONE YEAR FULL

If this Craftsman product fails due to a defect in material or workmanship within one
year from the date of purchase, return it to any Sears store or other Craftsman outlet in
the United States for free replacement.

This warranty applies for only 90 days from the date of purchase if this product is ever
used for commercial or rental purposes.

This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

SAVE THESE INSTRUCTIONS

For your safety, read and understand the information contained with and on the product.

• The owner and operator shall have an understanding of this product and safe operating
procedures before attempting to use this product.

•Instructions and safety information shall be conveyed in the operators native language
before use of this product is authorized. Make certain that the operator thoroughly
understands the inherent dangers associated with the use and misuse of the product.
If any doubt exists as to the safe and proper use of this product as outlined in the
factory authorized manual, remove from immediately. These jack stands must be
used as a matched pair to support one end of a vehicle only.

• Inspect before each use. Do not use if broken, bent, cracked or otherwise damaged
parts are noted. If the product has been or suspected to have been subjected to a
shock load, discontinue use until checked out by a Sears service center. Owners and
operators of this equipment shall be aware that the use and subsequent repair of this
equipment may require special training and knowledge.

• It is recommended that an annual inspection be done by qualified personnel and that
any missing or damaged parts, decals, warning / safety labels or signs be replaced
with Sears authorized replacement parts only. Any jack stand that appears to be
damaged in any way, is worn or operated abnormally should be removed from service
immediately.

• Labels and Operators Manual are available from Sears.

2