Craftsman 358341150 Owner’s Manual

Instruction Manual

I CRRFTSMRN°I

2.5 Peak HP Motor

ELECTRIC CHAIN SAW

Model No.

358.341150 - 14 in. Bar

S Safety S Assembly S Operation

S Maintenance

S Espahol

WARNING:

Read and follow all Safety Rules and Operating Instructions before first use of this product.

For answers to your questions about this product: Call 7 am-7 pm, Mon-Sat; Sun, 10 am-7 pm

1-800-235-5878 /Hoors,,stedare Central Time)

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

530163260 6/7/02

Warranty 2 Service and Adjustments 13 Safety Rules 2 Storage 14 Assembly 6 Troubleshooting Table 15 Operation 7 Spanish 16

Maintenance 11 Parts Ordering Back Cover

FULL ONE YEAR WARRANTY ON CRAFTSMAN ELECTRIC CHAIN SAW

If thisCraftsman Electric Chain Saw fails to perform properly due to a defect in mate- rial or workmanship within (1) year from the date of purchase, Sears will replace it free of charge.

This warranty excludes the bar and chain, which are expendable parts and be- come worn during normal use.

WARRANTY SERVICE IS AVAILABLE BY RETURNING THE CRAFTSMAN ELECTRIC CHAIN SAW TO THE NEAREST SEARS STORE OR SERVICE CENTER INTHE UNITED STATES•

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, Sears, Roebuck and Co., Inc., Hoffman Estates, IL 60179

_ILWARNING: When using electric gardening appliances, basic safety

precautions must always be followed to reduce the risk of fire, electric shock,

and serious injury. Read and follow all

instructions. _i WARN ING: Always disconnect

unit from power source when making repairs, adjustments, and when chang-

ing accessories and attachments such as saw bar, chain or guards.

Because a chain saw is a high-speed weodcutting tool, special precautions

must be observed to reduce risk of acci- dents. Careless or improper use of this

tool can cause serious injury.

PLAN AHEAD S Restrict the use of your saw to adult

users who understand and can fol- low the safety rules, precautions,

and operating instructions found in

this manual.

S Dress properly. Wear protective gear.

Always use steel-toed safety feet- wear with non-slip soles; snug-fitting

clothing; heavy*duty, non-slip gloves; eye protection such as non-fogging,

vented goggles or face screen; an approved safety hard hat; and sound

barriers (ear plugs or mufflers) to pro-

tect your hearing. Regular users

should have hearing checked regu-

lafly as chain saw noise can damage hearing.

SSecure hair above shoulder length. De

not wear loose clothing or jewelry; they can get caught in moving parts.

• Safety Hat

Hearing __

Protection ''_- iqp_._----- Eye

Snug Fittinc

Clothing Gloves

Safety f Safety Chaps Shoes

14N

Protection

SKeep all parts of your body away

from the chain when saw is running.

SKeep children away. Do not let visitors

contact chain saw or extension cord.

All visitors should be kept at least 30 feet (10 meters) away from work area.

SDo not handle or operate a chain

saw when you are fatigued, ill, upset, or if you have taken alcohol, drugs,

or medication. You must be in good physical condition and mentally alert.

If you have any condition that might be aggravated by strenuous work,

check with doctor before operating.

Watch what you are doing. Use com-

mon sense.

SDonotstartcuttinguntilyouhavea

clearworkarea,securefooting,and

especially if you are felling a tree, a retreat path. Keep work area clean.

OPERATE YOUR SAW SAFELY S Do not operate with one hand. Seri-

ous injury to the operator, helpers, or bystanders may result from one-

handed operation. A chain saw is in-

tended for two-handed use.

S Do not operate saw from a ladder or

in a tree.

S Make sure the chain will not make

contact with any object while starting

the saw, Never start the saw when the guide bar is in a cut,

S Don't force chain saw. It will do the

job better and safer at the rate for which it was intended.

S Do not put pressure on the saw, es-

pecially at the end of the cut, Doing so can cause you to lose control

when the cut is completed. S Stop the saw before setting it down. S Hand carry saw only when motor is

stopped. Carry the chain saw by the

front handle with the saw stopped, fin-

ger off the switch, the guide bar and saw chain to the rear.

S Use the right tool, cut wood only.

Don't use chain saw for purpose not intended; for example, don't use

chain saw for cutting plastic, mason- ry, non-wood building materials.

S Do not operate a chain saw that is

damaged, improperly adjusted, or not completely and securely as- sembled. Always replace bar, chain,

hand guard, or other parts immedi- ately if they become damaged, bro- ken, or are otherwise removed.

S Inspect chain saw cords periodically

and if damaged, have repaired by a Sears Service Center.

MAINTAIN YOUR SAW IN GOOD

WORKING ORDER S Have all chain saw service per-

formed by a Sears Service Center

except the items listed in the MAINTE- NANCE section of this manual.

S Make certain saw chain stops mov-

ing when trigger switch is released.

S Keep the handles dry and clean and

free from oil and grease. S Keep oil cap and fasteners securely

tightened. S Nonconforming replacement compo-

nents or the removal of safety devices may cause damage to the unit and possible injury to the operator or by-

standers. Use only Craftsman acces- sories and replacement parts as rec-

ommended. Never modify your saw.

SMaintain chain saw with care. SKeep unit sharp and clean for better

and safer performance.

SFollow instructions for lubricating and

changing accessories.

SUnplug the chain saw from the power

source when not in use, before servic- ing, and when changing accessories

and attachments, such as saw chain and guard.

SCheck for damaged parts. Before fur-

ther use of the chain saw, a guard or

other part that is damaged should be carefully checked to determine that it

will operate properly and perform its

intended function. Check for alignment of moving parts, binding of moving

parts, breakage of parts, mounting and any other conditions that may affect its

operation. A guard or other part that is damaged should be properly repaired

or replaced by a Sears Service Center unless otherwise indicated elsewhere

in the instruction manual.

SWhen not in use, chain saws should

be stored in a dry, high or locked-up place out of the reach of children.

SWhen storing saw, unplug and use a

bar sheath or carrying case.

ELECTRICAL SAFETY

_I!_WARNING: Avoid a dangerous

environment. To reduce the risk of electrical shock, do net use in rain, in

damp or wet locations, or around swimming pools, hot tubs, etc. Do not

expose to snow, rain, or water to avoid

the possibility of electrical shock. De

not handle extension cord or plug with

wet hands.

SUse a voltage supply as shown on the

nameplate of the unit.

SAvoid dangerous situations. De not

use in the presence of flammable liq- uids or gases to avoid creating a fire

or explosion and/or causing damage

to unit.

STo reduce the risk of electrical shock,

this appliance has a polarized plug

(one blade is wider than the other) and

will require the use of a polarized ex- tension cord. The appliance plug will fit

into a polarized extension cord only one way. If the plug does net fit fully into the extension cord, reverse the

plug.Iftheplugstilldoesnotfit,obtain acorrectpolarizedextensioncord.A

polarizedextensioncordwillrequire

theuseofapolarizedwalloutlet.This

plugwillfitintothepolarizedwalloutlet onlyoneway.Ifplugdoesnotfitfully

intothewalloutlet,reversetheplug.If

theplugstilldoesnotfit,contacta

qualified electrician to install the proper

wall outlet. Do not change the equip-

ment plug, extension cord receptacle, or extension cord plug in any way,

S To reduce risk of electrical shock, use

extension cords specifically marked as suitable for outdoor appliances. The

electrical rating of the cord must not be less than the rating of the unit. The

cord must be marked with suffix "W-A" (in Canada, "W"). Use a polarized

cord. Make sure your extension cord is in good condition. Inspect extension

cord before use and replace if dam- aged, Do not use a damaged cord.

Cord insulation must be intact with no cracks or deterioration. Plug connec-

tors must be undamaged. An under-

sized extension cord will cause a drop in line voltage resulting in loss of pow-

er and overheating. If in doubt, use the next heavier gauge. The lower the gauge number, the heavier the cord

(see SELECT AN EXTENSION CORD in

the OPERATIONsection). Do not use

multiple cords.

S Do not abuse cord. Never carry the

unit by the extension cord or yank extension cord to disconnect unit,

S Secure extension cord to power cord

to prevent disconnection from unit. S Do not use the unit if the switch does

not turn the unit on and off properly, or if the lock-out does not work, Re-

pairs to the switch must be made by a Sears Service Center.

S Keep extension cord clear of opera-

tor and obstacles at all times, Posi-

tion cord so that it will not be caught

on branches. Do not expose cords to heat, oil, water, or sharp edges,

S To avoid the possibility of electric

shock, avoid body contact with any grounded conductor, such as metal

fences or pipes, S Ground Fault Circuit Interrupter

(GFCI) protection should be provided on circuit or outlet to be used. Re-

ceptacles are available having built- in GFCI protection and may be used

for this measure of safety. Inspect

chain saw cords periodically and if

damaged, have repaired by a Sears Service Center.

GUARD AGAINST KICKBACK

Follow all safety rules to help avoid kick- back and other forces which can result

in serious injury.

r Kickback Path

' _44

[

Avoid Obstructions

Clear The Working Area

41bWARNING: Avoid kickback which

can result in serious injury. Kickback is the backward, upward or sudden for-

ward motion of the guide bar occurring when the saw chain near the upper tip

of the guide bar contacts any object such as a log or branch, or when the

wood closes in and pinches the saw

chain in the cut. Contacting a foreign object in the wood can also result in

loss of chain saw control. SRotational Kickback can occur

when the moving chain contacts an

object at the upper tip of the guide bar. This contact can cause the

chain to dig into the object, which stops the chain for an instant. The result is a lightning fast, reverse reaction which kicks the guide bar up and back toward the operator.

SPinch-Kickback can occur when the

the wood closes in and pinches the

moving saw chain in the cut along

the top of the guide bar and the saw

chain is suddenly stopped. This sud- den stopping of the chain results in a

reversal of the chain force used to cut wood and causes the saw to

move in the opposite direction of the chain rotation. The saw is driven

straight back toward the operator.

SPull-In can occur when the moving

chain contacts a foreign object in the wood in the cut along the bottom of the guide bar and the saw chain is

suddenly stopped. This sudden stop-

ping pulls the saw forward and away from the operator and could easily

cause the operator to lose control of the saw.

REDUCE THE CHANCE OF KICKBACK

S Recognize that kickback can happen.

With a basic understanding of kick-

back, you can reduce the element of surprise which contributes to acci-

dents.

S Never let the moving chain contact

any object at the tip of the guide bar.

S Keep working area free from obstruc-

tions such as other trees, branches,

rocks, fences, stumps, etc. Eliminate or avoid any obstruction that your saw chain could hit while cutting.

SWhen cutting a branch, do not let the

guide bar contact another branch or other objects around it.

S Keep saw chain sharp and properly

tensioned. A loose or dull chain can

increase the chance of kickback. Follow manufacturer's chain sharp- ening and maintenance instructions.

Check tension at regular intervals, but never with engine running. Make

sure bar mounting nuts are securely

tightened.

S Begin and continue cutting at full

speed. If the chain is moving at a slower speed, there is greater

chance of kickback occurring.

S Use extreme caution when re-enter-

ing a cut.

S Do not attempt cuts starting with the

tip of the bar (plunge cuts).

SWatch for shifting logs or other ob-

jects that could close a cut and pinch

or fall onto chain.

S Use the specified Reduced-Kickback

Guide Bar and Low Kickback Chain.

Avoid Pinch-Kickback: S Be extremely aware of situations or

obstructions that can cause material

to pinch the top of or otherwise stop the chain.

S Do not cut more than one log at a

time.

S Do not twist the saw as the bar is

withdrawn from an undercut when

bucking,

Avoid Pull-In:

SAlways begin cutting with the saw at

full speed and the saw housing

against wood.

S Use wedges made of plastic or

wood. Never use metal to hold the

cut open.

MAINTAIN CONTROL

Stand to the left of the saw

Thumb on _

underside

of handlebar

Never reverse _. j hand positions

Elbow locked

SA good, firm grip on the saw with

both hands will help you maintain

control. Don't let go. Grip the rear

handle with your right hand whether you are right or left handed. Wrap the

fingers of your left hand over and

around the front handlebar, and your

left thumb under the front handlebar.

Keep your left arm straight with the

elbow locked.

SPosition your left hand on the front

handlebar so it is in a straight line with your right hand on the rear ham

die when making bucking cuts.

Stand slightly to the left side of the

saw to keep your body from being in

a direct line with the cutting chain.

SStand with your weight evenly bal-

anced on both feet.

SDo not overreach. You could be drawn

or thrown off balance and lose control.

SDo not cut above shoulder height. It

is difficult to maintain control of saw

above shoulder height.

KICKBACK SAFETY FEATURES

_!kWARNING: The following fea* tures are included on your saw to help

reduce hazard of kickback; however, such features will not totally eliminate

this danger. Do not rely only on safety

devices. SHand Guard: designed to reduce the

chance of your left hand contacting the chain if your hand slips off the

front handlebar.

SPosition of front and rear handlebars:

designed with distance between

handles and "in-line" with each other.

The spread and "in4ine" position of the hands provided by this design

worktogethertogivebalanceand

resistanceincontrollingthepivotof

thesawbacktowardtheoperatorif

kickbackoccurs.

SReduced-KickbackGuideBar:de-

signedwitha small radius tip which

reduces the size of the kickback danger zone on the bar tip. This type

bar has been demonstrated to signif- icantly reduce the number and seri- ousness of kickbacks when tested in accordance with ANSI B 175.1.

I_ Small Radius

_ Tip Guide Bar

S Low Kickback Chain has met kick-

back performance requirements

when tested on the representative

sample of these chain saws speci-

fied in ANSI B175.1.

Low Kickback Chain

_1_i_-_4,--_- Elongated Guard Link

_-._v-" _ And Allows Wood To

SAFETY NOTICE: Exposure to vibra- tions through prolonged use of hand

tools could cause blood vessel or

nerve damage in the fingers, hands,

and joints of people prone to circulation disorders or abnormal

swelling. Prolonged use in cold weath- er has been linked to blood vessel

damage in otherwise healthy people. If symptoms occur such as numbness,

pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue

the use of this tool and seek medical attention. An anti-vibration s

Contoured Depth Gauge Deflects Kickback Force

Gradually Ride Into Cutter

does net guarantee the avoidance of

these problems. Users who operate

power tools on a continual and regular basis must closely monitor their physi-

cal condition and the condition of this

tool.

DOUBLE INSULATION CONSTRUCTION

This unit is double insulated to help pro-

tect against electric shock. Double in-

sulation construction consists of two separate "layers" of electrical insulation

instead of grounding. Tools built with this insulation system are not intended to be grounded. No grounding means is provided on this unit, nor should a means of grounding

be added to this unit. As a result, the ex-

tension cord used with this unit can be

plugged into any polarized 120 volt elec-

trical outlet.

Safety precautions must be observed

when operating any electrical tool. The

double insulation system only provides

added protection against injury resulting from an internal electrical insulation failure.

_h, WARNING: All electrical repairs to this unit, including housing, switch,

motor, etc., must be diagnosed and re-

paired by qualified service personnel.

Replacement parts for a double insu-

lated appliance must be identical to the

parts they replace. A double insulated

appliance is marked with the words

"double insulation" or "double insu-

lated". The symbol[_ (square within a

square) may also be marked on the

appliance. Failure to have the unit re-

paired by Sears service personnel can

cause the double insulation construc- tion to become ineffective and result in

serious injury.

STANDARDS: This product is listed by

Underwriters Laboratories, Inc. in ac-

cordance with UL Standard 1662.

SAVE THESE INSTRUCTIONS

_WARNING: Before using chain saw, ensure all fasteners are secure.

CARTON CONTENTS

Model 358.341150

S Chain Saw (fully assembled) S Bar Sheath

S Gloves

Examine parts for damage. Do not use

damaged parts.

NOTE: If you need assistance or find

parts missing or damaged, please call

1-800-235-5878.

ASSEMBLY

Your saw is fully assembled; no as-

sembly is necessary.

KNOW YOUR SAW

READ THiS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR

CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the

location of the various controls and adjustments. Save this manual for future ref-

erence.

Oiler Actuated Chain Adjustment Bar Sprocket

Bar Oil Cap Screw Hole

Lock-out Bu_on

Bar

Chain

TRIGGER SWITCH

The TRIGGER SWITCH is used to turn on the unit. Squeeze the trigger switch

to operate the unit after lock-out

button has been pushed in. Release

the trigger to turn the unit off. TRIGGER LOCK-OUT BUTTON

The TRIGGER LOCK-OUT BUTTONis a control feature designed to prevent the

motor from being accidently started. When the rear handle is gripped in a

normal cutting position, the trigger

lock-out button can be pushed in by the thumb, permitting the index finger to squeeze the trigger. It is not neces- sary to maintain pressure on the trig- ger lock-out button once the trigger

has been engaged.

OPERATING INSTRUCTIONS

Use only a voltage supply as specified on your unit.

SELECT AN EXTENSION CORD

Extension cords are available for this unit at Sears.

RECOMMENDATIONS

(7.67 M) (15.24 M) (30.48 M)

Volts 25 ft. 50 ft. 100 ft.

120 MINIMUM WIRE GAUGE

*American Wire Gauge

16 16 14 I

A.W.G.* A.W.G.* A.W.G.*

BAR OIL CAP/OILER ACTUATOR The BAR OIL CAP is used to access the

bar oil tank and pressed to supply oil

to chain.

CHAIN ADJUSTMENT SCREW The CHAIN ADJUSTMENT SCREW is

used to adjust the chain tension. POWER CORD

The POWER CORD is used to connect

the chain saw to an approved extem

sion cord. CHAIN TENSION It is normal for a new chain to stretch

during first 30 minutes of operation. You should check your chain tension frequently. Readjust chain after every

15 minutes of operation.See CHECK

CHAIN TENSION under the SERVICE AND ADJUSTMENTS section.

ATTACH THE EXTENSION CORD TO YOUR CHAIN SAW

Toprevent disconnection from unit, se-

cure extension cord to power cord as

shown in the following illustration.

Extension Cord

BEFORE STARTING SAW

_II, WARNING: Be sure to read the electrical safety information in the

SAFETY RULES section of this manual

before you begin. If you de net under-

stand the electrical safety information do not attempt to use your unit. Seek

help from someone that does under-

stand the information or call the cus- tomer assistance help line at

1-800-235-5878,

GUIDE BAR AND CHAIN OIL The bar and chain require lubrication.

The manually-operated chain oiler pro* vides lubrication to the chain and guide

bar. Be sure to fill the bar oil tank before

each cutting session. The oiler activator/

bar oil cap must be used regularly and

often enough to maintain a thin film of oil on the bar and chain while saw is cut-

ting. It is recommended that the oiler actuator/bar oil cap be operated every ten (10) seconds and held for approxi- mately three (3) seconds each time it is

pressed. For maximum guide bar and

chain life, we recommend you use Craftsman chain saw bar oil. If Crafts-

man bar oil is not available, you may use a good grade SAE 30 oil until you

are able to obtain Craftsman brand. The oil output is manually metered during

operation. Use a funnel to fill the tank.

Replace oil cap securely. Check oil lev-

el after every 15 minutes of operation. STOPPING YOUR SAW

S Release the trigger switch. S If motor does not stop. disconnect

the extension cord. Discontinue use

of the unit until repaired by a Sears Service Center.

STARTING YOUR SAW

1. Connect the saw to a power source using the proper size exten- sion cord (see SELECT AN EXTEN- SION CORD).

2. Push in switch lock out button.

3. Squeeze and hold the trigger switch.

OPERATING TIPS S Check chain tension before first use

and after 1 minute of operation. See CHECK CHAIN TENSION in the SER-

VICE AND ADJUSTMENTS section.

S Cut wood only. De not cut metal,

plastics, masonry, non-weed building materials, etc.

S Stop the saw if the chain strikes a

foreign object. Inspect the saw and

repair parts as necessary.

SKeep the chain out of dirt and sand.

Even a small amount of dirt will quickly dull a chain and increase the

possibility of kickback.

SPractice cutting a few small logs us-

ing the following steps, This will help

you get the "feel" of using your saw

before you begin a major sawing op* eration,

SSqueeze the trigger switch and al-

low unit to reach full speed before

cutting.

S Begin cutting with the saw frame

against the log.

S Keep the motor at full speed the en-

tire time you are cutting.

S Release trigger switch as soon as

cut is completed, allowing motor to stop,

S Keep the cord away from the cutting

area. Position cord so it will not be caught on branches and the like

during cutting.

STo avoid losing control when cut is

complete, de net put pressure on saw at end of cut.

SStop motor before setting saw down. TREE FELLING TECHNIQUES

Check for broken or dead branches

which can fall while cutting causing seri-

ous injury. Do not cut near buildings or electrical wires if you do not know the

direction of tree fall, nor cut at night since you will not be able to see well,

nor during bad weather such as rain, snow, strong winds, etc. If the tree

makes contact with any utility line, the utility complany should be notified im- mediately.

SCarefully plan your sawing operation in

advance.

SClear the work area. You need a clear

area all around the tree so you can have secure footing.

SThe chain saw operator should keep

on the uphill side of the terrain as the

tree is likely to roll or slide downhill

after it is felled,

SStudy the natural conditions that can

cause the tree to fall in a particular direction, such as:

SThe wind direction and speed. SThe lean of the tree, The lean of atree

might not be apparent due to uneven or sloping terrain, Use a plumb or lev-

el to determine the direction of tree

lean.

SWeight and branches on one side. SSurrounding trees and obstacles.

SLookfordecayandrot.Ifthetrunkis

rotted,itcansnapandfalltowardthe operator.

SMakesurethereisenough room for

the tree to fall. Maintain a distance of

2-1/2 tree lengths from the nearest person or other objects. Motor noise can drown out a warning call.

S Remove dirt, stones, loose bark,

nails, staples, and wire from the tree

where cuts are to be made.

Plan aclear retreat path

_,-- -U """"_- Direction of Fall

FELLING LARGE TREES

(6 inches in diameter or larger) The notch method is used to fell large

trees. A notch is cut on the side of the tree in the desired direction of fall After

a felling cut is made on the opposite side of tree, the tree will tend to fall in the direction of the notch.

NOTE: If tree has large buttress roots,

remove them before making the notch.

If using saw to remove buttress roots, keep saw chain from contacting ground to prevent dulling of the chain.

NOTCH CUT AND FELLING TREE S Make notch cut by cutting the top of

the notch first. Cut through 1/3of the

diameter of the tree. Next complete

the notch by cutting the bottom. See

illustration. Once notch is cut, re- move the wedge of wood from the

tree.

Firstcut _ 2" I Felling cut here

i < ll'i

N°re h "_--b. _ :__'," : z

s ge

SAfter removing the wood from the

notch, make the felling cut on the op- posite side of the notch. This is done by making a cut about two inches higher than the center of the notch. This will leave enough uncut wood between the felling cut and the notch

to form a hinge. This hinge will help

prevent the tree from falling in the

wrong direction.

Hinge holds tree on stump and helps control fail

Opening of felling

Closing notch

NOTE: Before felling cut is complete, use wedges to open the cut if neces- sary to control the direction of fall. To avoid kickback and chain damage, use

wood or plastic wedges, but never

steel or iron wedges. SBe alert to signs that the tree is

ready to fall: cracking sounds, widen- ing of the felling cut, or movement in

the upper branches.

SAs tree starts to fall, stop saw, put it

down, and get away quickly on your planned retreat path.

SDO NOT use your saw to cut down a

partially fallen tree. Be extremely cau-

tious with partially fallen trees that may

be poorly supported. When a tree doesn't fall completely, set saw aside and pull down tree with a cable winch,

block and tackle, or tractor.

CUTTING A FALLEN TREE (BUCKING)

Bucking is the term used for cutting a

fallen tree to the desired log size. _II_WARNING: Do not stand on the

log being cut. Any portion can roll causing loss of footing and control. Do

not stand downhill of the log being cut. IMPORTANT POINTS SCut only one leg at a time.

SCut shattered wood very carefully;

sharp pieces of wood could be flung

toward operator.

SUse a sawhorse to cut small logs.

Never allow another person to hold the log while cutting and never hold the log with your leg or foot.

SDo not cut in an area where logs,

limbs, and roots are tangled. Drag

logs into a clear area before cutting them by pulling out exposed and

cleared logs first.

BUCKING TECHNIQUES

_WARNING: If saw becomes

pinched or hung in a log, don't try to

force it out. You can lose control of the saw, resulting in injury and/or damage

to the saw. Stop the saw; drive a wedge of plastic or wood into cut until

the saw can be removed easily. Re* start saw and carefully reenter the cut,

Do not use a metal wedge. Do not at-

tempt to restart your saw when it is

pinched or hung in a log.

Use a wedge to remove pinched saw.

SRoll the log over and finish with a

second overcut.

SWatch for logs with a compression

side. See illustration above for cut- ting logs with a compression side.

BUCKING USING A LOG OR SUPPORT STAND

SRemember your first cut is always on

the compression side of the log,

(Refer to the illustration below for your first and second cut)

SYour first cut should extend 1/3 of the

diameter of the log,

SFinish with your second cut.

Cut

Turn saw OFF and use a plastic or wooden wedge to force cut open.

Overcutting begins on the top side of the log with the bottom of the saw

against the log. When overcutting use

light downward pressure.

Undercutting involves cutting on the underside of the log with top of saw against the log. When undercutting use light upward pressure. Hold saw firmly and maintain control. The saw will tend to push back toward you.

_WARNING: Never turn saw up- side down to undercut. The saw can-

not be controlled in this position. Always make your first cut on the com-

pression side of the log. The compres-

sion side of the log is where the pres- sure of the log's weight is concentrated.

Firstcut on compression side of log

Second cut

_/Second cut

Firstcut on compression side of log

BUCKING WITHOUT A SUPPORT S Overcut through 1/3 of the diameter

of the log.

_"__t Cut

/ 1stCut

Using a support stand Cut

LIMBING AND PRUNING

_IkWARNING: Be alert for and

guard against kickback. Do not allow

the moving chain to contact any other

branches or objects at the nose of the guide bar when limbing or pruning, Al-

lowing such contact can result in seri- ous injury.

_kWARNING: Never climb into a tree to limb or prune, Do not stand on

ladders, platforms, a log, or in any po- sition which can cause you to lose

your balance or control of the saw.

+ 22 hidden pages