Craftsman 32039588 Owner’s Manual

Operator's Manual

2.4 Amp 1/4 SHEET SANDER

Model No. 320.39588

* WARRANTY

°@°,D

LISTED

_WARNING" To reduce the risk of injury, the user must read and understand the

Operator's Manual before using this product.

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.

www,craftsman,com

* SAFETY * DESCRiPTiON * ASSEMBLY * OPERATION * MAINTENANCE

* ESPANOL

Warranty Page 2

Safety Symbols Pages 4-5 Safety Instructions Pages 6-8 Description Pages 9-10

Assembly Page 11

Operation Pages 12-16 Maintenance Pages 17-18

Troubleshooting Page 18

Parts List Pages 19-20

CRAFTSMAN ONE YEAR LiMiTED WARRANTY FOR ONE YEAR from the date of purchase, this product is warranted against any defects in material or workmanship. With proof of purchase,

defective product will be replaced free of charge. For warranty coverage details to obtain free replacement, visit the web

page: www.craftsrnan.corn/warranty

This warranty does not cover the sandpaper, which is an expendable part that can wear out from normal use within the warranty period.

This ONE YEAR warranty is void if this product is ever used while providing

commercial services or if rented to another person. For 90 DAY commercial and rental use terms, see the Craftsman warranty web page.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state. Sears Brands Management Corporation, Hoffman Estates, IL 60179.

SAVE THESE INSTRUCTIONS!

READ ALL INSTRUCTIONS!

This 1/4sheet sander has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority

in the design of this product, making it easy to maintain and operate. _, DANGER: People with electronic devices, such as pacemakers, should

consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or

failure of the pacemaker.

2 © Sears Brands, LLC

_,WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of

California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints Crystalline silica from bricks and cement and other masonry products, and

Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicah work in a well ventilated

area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Thepurposeofsafetysymbolsistoattractyouattentiontopossibledangers. Thesafetysymbolsandtheexplanationswiththemdeserveyourcareful

attentionandunderstanding.Thesymbolwarningsdonot,bythemselves, eliminateanydanger.Theinstructionsandwarningstheygivearenosubstitutes

forproperaccidentpreventionmeasures.

,_, WARNING: Be sure to read and understand all safety instructions in this manual, including all safety alert symbols such as "DANGER," "WARNING," and

"CAUTION" before using this tool. Failure to follow all instructions listed in this manual may result in electric shock, fire, and/or serious personal injury.

SYMBOL SIGNAL MEANING

SAFETY ALERT SYMBOL: indicates DANGER, WARNmNG, or CAUTION; may

be used in conjunction with other symbols or pictographs.

,_ DANGER: Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

,_, WARNING: Indicates a hazardous situation which, if not avoided, could

result in death or serious injury. _1_ CAUTION: Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

Damage prevention and Information Messages

These inform the user of important information and/or instructions that could

Beadto equipment or other property damage if they are not followed. Each message is preceded by the word "NOTICE", as in the example below.

NOTICE: Equipment and/or property damage may result if these instructions are not followed.

_WARNING: To ensure safety and reliability, all repairs should be performed

by a qualified service technician.

,_ WARNmNG: The operation of any power tools can result in

foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation,

always wear safety goggles or safety glasses with side shield and a full face shield when needed. We recommend a Wide

Vision Safety Mask for use over eyeglasses or standard safety

glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

SAVE THESE iNSTRUCTiONS

Some of these following symbols may be used on this tool. Please study them and Beam their meaning. Proper interpretation of these symbols will allow you to

operate the tool better and more safely.

SYMBOL NAME DESIGNATION/EXPLANATION

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

min Minutes Time

Alternating Current Type of current

Direct Current Type or a characteristic of current

n O No-load Speed Rotational speed, at no load

[] Class II Construction Double-insulated construction

.../min Per Minute Revolutions, strokes, surface speed,

Wet Conditions Alert Do not expose to rain or use in damp

Read The Operator's Manual read and understand operator's manual

O Always wear safety goggles or safety

Eye Protection glasses with side shields and a fulI face

Safety your safety.

Alert Precautions that involve

No=Hands Symbol Failure to keep your hands away from theblade will result in serious personal injury.

No=Hands Failure to keep your hands away from the

No-Hands Failure to keep your hands away from the

No-Hands Symbol Failure to keep your hands away from the

Symbol

orbits, etc., per minute

locations.

To reduce the risk of injury, user must

before using this product.

shield when operating this product.

blade will result in serious personal injury.

Hot Surface To reduce the risk of injury or damage,

avoid contact with any hot surface.

GENERAL POWER TOOL SAFETY WARNINGS

,_ WARNING: Read aft safety warnings and instructions. Failure to follow the

warnings and instructions may result in electric shock, fire and / or serious injury.

Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains=operated (corded)

power tool or battery=operated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

= Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adaptor plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock

• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable

for outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock. if operating a power tool in a damp location is unavoidable, use a

ground fault circuit interrupter (GFCl} protected supply. Use of a GFCI reduces the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the

influence of drugs, alcohol, or medication. A moment of inattention while

operating power tools may result in serious personal injury.

• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or

carrying the tool. Carrying power tools with your finger on the switch or energizing in power tools that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or

long hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use

of these devices can reduce dust-related hazards.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and more safely at the rate for which it was designed.

• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must

be repaired.

• Disconnect the plug from the power source andlor the battery pack

from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

• Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the power tool's operation, if damaged, have the power tool repaired

before use. Many accidents are caused by poorly maintained power tools.

Keepcuttingtoolssharpandclean.Properlymaintainedcuttingtoolswith

sharpcuttingedgesarelesslikelytobindandareeasiertocontrol.

Usethepower tool, accessories and tool bits etc., in accordance with

these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from

those intended could result in a hazardous situation.

SERVICE

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power

tool is maintained.

Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create

a risk of shock or injury.

SPECiFiC SAFETY RULES FOR SHEET SANDER

Hold power tools by insulated gripping surfaces, because the

sandpaper may contact its own cord. Cutting a "live" wire may make

exposed metal parts of the power tool "live" and could give the operator an electric shock.

* A suitable breathing respirator must be worn while sanding lead paint,

some woods and metal to avoid breathing the harmful/toxic dust or air.

* Always wear safety goggles and a dust mask when sanding, especially

sanding over-head.

* The machine is not suitable for wet sanding. * Secure the workpiece. A workpiece clamped with clamping devices or in a

vice is held more secure than by hand.

* Make sure the sandpaper is not contacting the workpiece before the on/off

rocker switch is in the ON position.

* Do not leave the tool running. Operate the tool only when hand-held.

KNOWYOUR SHEET SANDER (Fig. 1)

Fig. 1 Live-Tool Indicator Light

On/Off Rocker Switch

LED _ /

Worklight_

Platen /-

Paper Punch

Dust Box

Cord

Vent

Dust-exhaust Port

per Clamp

Pressure-Control Indicator

1/4 Sandpaper Sheets

o o o

o o

o o o

PRODUCT SPECIFICATIONS

Input 120V, 60Hz, AC only, 2.4 Amps No-load Speed 14000 OPM Paper Size 1/4 sheet Paper Type Non-adhesive sandpaper

Protection Class II

,_ WARNING: The safe use of this product requires an understanding of the information on the tool and in this operatoPs manual as welJ as knowledge of the

project you are attempting. Before using this product, familiarize yourself with all

operating features and safety rules.

ORBITAL MOTION

Orbital motion is ideal for fast cutting action when removing old finishes, smoothing rough wood, cutting stock down to required dimensions or for

finishing surfaces to be painted. The sandpaper moves in tiny circles at a very

high speed, allowing the sander to move easily.

PRESSURE CONTROL

Your tool is equipped with pressure=control indicator lights. The indicator lights will

let you know if you are applying the proper amount of pressure during operation.

DUST BOX

Translucent dust box with micro=fine filter provides for efficient dust control and extraction.

DUST=EXHAUST PORT

The Dust=exhaust Port allows you to connect to a 1=1/4 in. diameter vacuum

hose to help keep the work area clean.

ON/OFF ROCKER SWITCH The dust=sealed on/off rocker switch is conveniently located for easy control,

sealed to keep out dust for long life.

LED WORKLIGHT

The LEDworklight, located inthe front of the tool, illuminateswhen the rocker switch is in the ON position. This feature provides extra light for increased visibility.

PAPER CLAMP

The sander has two paper clamps designed to secure standard sandpaper to the platen.

PAPER PUNCH

The paper punch can be used to punch holes in sandpapers, to allow sanded

material to pass through the sheet sander into the dust box or through a vacuum.

LIVE=TOOL INDICATOR LIGHT

The LED indicator light illuminates green when the tool is plugged into a

power source.

,& ,_b, WARNING: If any parts are broken or missing, do not attempt to plug or

operate the sheet sander until the broken or missing parts are replaced. Failure to do so could result in possible serious injury.

_, WARNING: Do not attempt to modify this sander or create accessories not recommended for use with this sheet sander. Any such alteration or modification is

misuse and could result in a hazardous condition leading to possible serious injury. ,_, WARNING: To prevent accidental starting that could cause serious personal

injury, always disconnect the sander from the power source when assembling parts, making adjustments, installing or removing sandpaper, cleaning, or when it is not in use.

UNPACKING

* Carefully remove the tool and any accessories from the carton. Make sure

that all items listed in the packing list are included.

* Inspect the tool carefully to make sure that no breakage or damage

occurred during shipping.

* Do not discard the packing material until you have carefully inspected and

satisfactorily operated the tool.

* If any parts are damaged or missing, please return the tool to the place of

purchase.

PACKING LIST

1/4 sheet sander, 3 sandpapers (grit 60,120,220), dust box, paper punch and

operator's manual.

WARNING: To prevent accidental starting that could cause serious personal

injury, always disconnect the sander from the power source when assembling parts, making adjustments, installing or removing sandpaper, cleaning, or when

it is not in use.

TURNING THE SANDER ON/OFF (Fig. 2) To turn on the sander, connect the plug to an electrical outlet, and depress the

side of the rocker switch marked "F. To turn it off, depress the side of the rocker switch marked "O'.

LED WORKLIGNT (Fig. 2)

The LED worklight, located in the front of the tool, will turn on when

the rocker switch is in the ON (l)

position. This provides additional Bighting on the surface of the

workpiece for operation. The LED worklight will turn off when the

switch is in the OFF (O) position.

THE LIVE=TOOL INDICATOR

LIGHT (Fig. 3)

The sheet sander is equipped with a Bive=tool indicator Bight. When the tool is plugged into an electrical

supply, the live=tool indicator light will illuminate green to remind you

that the tool is plugged in. When the tool is unplugged, the indicator

light will turn off.

Fig. 2

Fig. 3

On/Off rocker switch

LED worklight

I-

Live-tool I indicator light

PRESSURE CONTROL (Fig. 4}

Your tool is equipped with pressure control indicator lights. The

indicator lights will Betyou know if

you are applying the proper amount of pressure during operation.

If only the green indicator Bight illuminates, it indicates that you

are applying the correct amount of pressure.

If the yellow and the green lights both illuminate, they indicate that

you are applying a little more

pressure than needed. If the red, green and yellow lights all illuminate, they indicate that you are applying

too much pressure and you need to Bessenthe pressure as soon as possible. ,_ CAUTION: To prevent possible personal injury or tool or workpiece damage,

always be sure that the pressure control illuminates only green during tool operation.

Fig. 4

Pressure

control

indicator

ATTACHING THE SANDPAPER

_WARNING: Always inspect the sandpaper before attaching it. Do not use the paper if it is torn or defective.

The non=adhesive sandpaper clamps to the front and back of the platen.

1. Disconnect the sander from the power source.

WARNING: Failure to unplug the sander could result in accidental starting,

causing possible serious personal injury.

2. Remove any dust or debris from the platen.

The paper clamp levers are located on each side of the sander and are

locked into slots on top of the platen.

Raise these two levers "up"

and disengage them from the slots inthe platen. This

will release the tension on the paper clamps that hold

paper clamp

the paper in position on the

underside of the platen (Fig. 5).

Insert the front end of the

sandpaper approximately

1/2 in. under the front paper clamp.

Paper

clamp

lever

Lift up on the lever that controls the front paper clamp and lock it back into the

slot on the platen. This will securely clamp the paper to the front of the platen.

Smooth out the sandpaper by pressing it tightly against the bottom of the platen (front to back).

Insert the back end of

the sandpaper into the

back paper clamp, fit the

sandpaper as tightly as

possible, and lift up on the back clamp lever to lock it

into place. This will securely

Fig. 6 Paper

goes

under the

clamp

clamp the paper to the back of the platen. The sandpaper

should now be positioned tightly against the underside

of the platen from front to

Raise lever up

to clamp paper

back and securely clamped in place (Fig. 6).

PAPER PUNCH

A paper punch is provided with the sander so you can punch

properly aligned holes into the

sandpaper. This is done after the

paper is installed onto the sander.

To punch holes, line up the front and side of the sander over the

paper punch as shown in Fig. 7,

then lower the sander onto the

punch template while applying

pressure. Make sure that the holes are punched all the way through the paper and clear the holes in

the sandeds platen.

NOTmCE: Punching holes

propedy is a necessary step for the dust-collecting system to

operate properly.

Fig. 7

Paper punch

+ 30 hidden pages