Craftsman 315265670 Owner’s Manual

PERATOR'S MANUAL

1/2 in. HAMMER DRILL

VARIABLE SPEED/REVERSIBLE

DOUBLE iNSULATED

Model No.

315.265670

WARNING: To reduce the risk of injury, the user must read and understand the

operator's manual before using this product.

Customer Help Line: 1=800=932=3188

Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman

983000-853 Save this manual for future reference

08-17-06 (REV:02)

[] Warranty..........................................................................................................................................................................2

[] Introduction.....................................................................................................................................................................2

[] GeneralSafetyRules....................................................................................................................................................3-4

[] SpecificSafetyRules.......................................................................................................................................................4

[] Symbols........................................................................................................................................................................5-6

[] Electrical..........................................................................................................................................................................7

[] Features........................................................................................................................................................................8-9

[] Assembly.........................................................................................................................................................................9

[] Operation..................................................................................................................................................................10-14

[] Maintenance.............................................................................................................................................................14-15

[] Accessories...................................................................................................................................................................15

[] ExplodedViewandPartsList........................................................................................................................................16

[] PartsOrdering/Service....................................................................................................................................BackPage

ONE-YEAR FULL WARRANTY ON CRAFTSMAN PROFESSIONAL TOOL If this Craftsman Professional tool fails to give complete satisfaction within one year from date of purchase, RETURN IT TO

ANY SEARS STORE OR PARTS AND REPAIR CENTER OR OTHER CRAFTSMAN OUTLET iN THE UNITED STATES FOR FREE REPAIR.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179

This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.

WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric

shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

SAVE THESE INSTRUCTIONS WORK AREA SAFETY

[] Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

[] Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

[] Keep children and bystanders away while operat-

ing a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY [] Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Un- modified plugs and matching outlets will reduce risk of

electric shock.

[] Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body

is earthed or grounded.

[] Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the risk of electric shock.

[] Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric shock.

[] When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use. Use of a cord suit-

able for outdoor use reduces the risk of electric shock.

PERSONAL SAFETY [] Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

[] Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appro- priate conditions will reduce personal injuries.

[] Avoid accidental starting. Ensure the switch is in

the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

[] Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal

injury.

[] Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power tool in unexpected situations.

[] Dress properly. Do not wear loose clothing or jew-

elry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can

be caught in moving parts.

[] if devices are provided for the connection of dust

extraction and collection facilities, ensure these are connected and properly used. Use of these devices

can reduce dust-related hazards.

[] Do not wear loose clothing or jewelry. Contain long

hair. Loose clothes, jewelry, or long hair can be drawn into air vents.

[] Do not use on a ladder or unstable support. Stable

footing on a solid surface enables better control of the power tool in unexpected situations.

POWER TOOL USE AND CARE [] Do not force the power tool. Use the correct power

tool for your application. The correct power tool will do the job better and safer at the rate for which it was

designed.

[] Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

[] Disconnect the plug from the power source and/or

the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

[] Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

[] Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any other condition that may affect the power tool's

operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

[] Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

[] Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the manner intended for the particular type of power

tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

SERVICE []

[]

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is main-

tained.

_1I_ WARNING! To reduce the risk of injury, user must

read instruction manual.

When servicing a power tool, use only identi-

cal replacement parts. Follow instructions in the Maintenance section of this manual. Use of unau-

thorized parts or failure to follow Maintenance instruc- tions may create a risk of shock or injury.

[] Wear ear protectors with impact drills. Exposure to

noise can cause hearing loss.

[] Use auxiliary handles supplied with the tool. Loss of

control can cause personal injury.

[] Hold power tools by insulated gripping surfaces

when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal

parts of the tool "live" and shock the operator.

[] Know your power tool. Read operator's manual

carefully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.

[] Always wear safety glasses. Everyday eyeglasses

have only impact-resistant lenses; they are NOT safety glasses. Following this rule will reduce the risk

of serious personal injury.

[] Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the

risk of serious personal injury.

[] Protect your hearing. Wear hearing protection dur-

ing extended periods of operation. Following this rule will reduce the risk of serious personal injury.

[] Inspect tool cords periodically and, if damaged,

have repaired at your nearest Sears or other quali- fied service center. Constantly stay aware of cord location. Following this rule will reduce the risk of

electric shock or fire.

[] Check damaged parts. Before further use of the

tool, a guard or other part that is damaged should

be carefully checked to determine that it will op- erate properly and perform its intended function. Check for alignment of moving parts, binding of

moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be

properly repaired or replaced by an authorized ser- vice center. Following this rule will reduce the risk of shock, fire, or serious injury.

[] Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one

heavy enough to carry the current your product will draw. A wire gauge size (A.W.G.) of at least 14 is

recommended for an extension cord 50 feet or less

in length. A cord exceeding 100 feet is not recom-

mended. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the

cord. An undersized cord will cause a drop in line volt-

age resulting in loss of power and overheating.

[] inspect for and remove all nails from lumber before

using this tool. Following this rule will reduce the risk

of serious personal injury.

[] Save these instructions. Refer to them frequently and

use them to instruct others who may use this tool. If you loan someone this tool, loan them these instruc-

tions also.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities

contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Someofthefollowingsymbolsmaybeusedonthistool.Pleasestudythemandlearntheirmeaning.Properinterpreta-

tionofthesesymbolswillallowyoutooperatethetoolbetterandsafer.

SYMBOL NAME DESIGNATION/EXPLANATION

min

"L,

n o

[]

.../min

Volts

Amperes

Hertz

Watt

Minutes

Alternating Current

Direct Current

No Load Speed

Class II Construction

Per Minute

Wet Conditions Alert

Voltage

Current

Frequency (cycles per second)

Power

Time

Type of current

Type or a characteristic of current

Rotational speed, at no load

Double-insulated construction

Revolutions, strokes, surface speed, orbits etc., per minute

Do not expose to rain or use in damp locations.

@ @

Read The Operator's Manual

Eye Protection

Safety Alert

No Hands Symbol

Hot Surface

To reduce the risk of injury, user must read and understand

operator's manual before using this product.

Always wear safety goggles or safety glasses with side shields,

or a full face shield when operating this product.

Precautions that involve your safety.

Failure to keep your hands away from the blade will result in serious personal injury.

To reduce the risk of injury or damage, avoid contact with any

hot surface.

+ 11 hidden pages