Owner's Manual
CRIIFTSMFIW
AccESSORIES FOR THE
10 in. (254 mm) COMPOUND MITER SAW
Model No.
315.235360
Item No.
_923537
(accessories optional)
_923536
(accessories included)
Save this manual for
future reference.
CAUTION: Read and
followallSafety Rulesand
Operating Instructionsbefore
firstuse ofthisproduct.
• SAFETY
• LOOSE PARTS
• INSTALLATION
• SERVICES
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
972000-485
1-98
READ ALL INSTRUCTIONS •
...... L,"
I
• READ THESE INSTRUCTIONS AND THE
- INS_ 315;235360 COM-
. _PQI.LNDMLT.EB.._.A.__TJ:!_ROUGHLY before •
using accessories._ .:_::!_ _,
• KNOW YOUR POWER TOQL Read the owner's
m_n_r f0Pthe (3ompo-u-h_'MiterSaw carefully.
• Lear_-tht_w_ and i'mitations as •
we.!! as.thesp._otential hazards related to
this tool.
KEEP THE WORK AREA CLEAN. Cluttered
work areas and work benches invite accidents.
DO NOT leave tools or pieces of wood on the
saw while it is in operation.
ALWAYS WEAR SAFETY GLASSES. Everyday
eyeglasses have only impact-resistant lenses;
they are NOT safety glasses.
ALWAYS DISCONNECT SAW FROM POWER
SUPPLY BEFORE MAKING ADJUSTMENTS
OR ADDING ACCESSORIES. Make sure the
switch is off when reconnecting to power supply.
SAVE THESE INSTRUCTIONS. Refer to them
frequently and use to instruct other users, if you
loan someone this tool, loan them these instruc-
tions also.
_k Look for this symbol to point out important safety precautions. It
means attention!!! Your safety is involved.
The following accessories are included with item no. _23536. They are optional and may also be purchased for
use with item no. 92.3537:
• Work Clamp (item no. _'23461)
• 8 mm Work Clamp Screw (Included with
Work Clamp)
• Dust Bag (Item no. 9-23466)
• Owner's Manual
• Stop Block (Included with Table Extensions)
• Table Extensions (2) (Item no. _23464)
• Large Wing Screws(2) (Included with Table
Extensions)
• Small Wing Screw (Included with Table
Extensions)
WORKCLAMP
_8mm
WORKCLAMPSCREW
SMALLWINGSCREW
_ WARNING: The use of attachments or accessories not listed might be hazardous.
2
LARGEWINGSCREWS
Fig, 1