Craftsman 315220730 Owner’s Manual

Owner's Manual

CRRFTSMRW

Two Speed / Reversible

10 mm (318 in.) CORDLESS

DRILL

Stock No. _922073

Model No.

315.220730

Save this manual for

future reference

a, CAUTION: Read and

follow all Safety Rules and Operating InstruclJons

before first use of this product.

Sold by: Sears Canada Inc., Toronto M5B 2B8

972000-425

12-97

• Warranty ......................................................................................................................................................... 2

• Introductionand ProductSpecifications......................................................................................................... 2

• Rules ForSafe Operation ........................................................................................................................... 3-5

A. ImportantSafety Rules For BatteryTools.............................................................................................. 4

B. ImportantSafety InstructionsFor Charger............................................................................................. 4

C, ImportantInformationFor RechargingHot Batteries............................................................................. 5

• Features ......................................................................................................................................................... 6

• Operation................................................................................................................................................... 7-12

• Maintenance................................................................................................................................................. 13

• ExplodedViowand Repair Parts List........................................................................................................... 15

• Parts Ordering/ Service............................................................................................................................... 16

FULL "RNO YEAR WARRANTY ON CRAFTSMAN TOOL If thisCIIRFTSMRN Toolfails to operate withintwoyears from the data of purchase,ratumit tothe nearest

Sears Canada Inc. ("Sears') store and =Sears"will repairit,free of charge. If thistool is usedfor commercialor rental purposesthiswarranty appliesfor only90 days from the date of

purchase. ThiswaKa_y isin additionto any statutorywarranty,

Sears Canada Inc., Toronto M5B 2B8

Yourddll has manyfeatures for makingddllJng

operationsmore pleasant and enjoyable.Safety, performanceand dependabilityhave been giventop

pdodtyinthe design ofthisdrillmaking it easy to maintainand operate.

_, CAUTION: Carefullyread throughthisentire

owners manual beforeusingyour newddll.Pay close attentionto the RulesFor Safe Operation, Warningsand Cautions. Ifyou use yourddll pmpedy and onlyfor what it is intended,you will

enjoyyears of safe, reliableservice.

SPECIFICATIONS: ChuckCapacity

Motor

Charger Rating

No LoadSpeed Switch

Charge Rate

10 mm (3/8 in.)

7.2 VoltsDC

120 Volts,60 Hz, AC Only

300 / 600 RPM

TwoSpeed - Reversible

3 Hours

The purpose of safety symbols is to attract your attention to possible dangora. The ssfoly symbols, and

the explanations with them, deserve your careful attention and understanding. The safety warnings do

not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

NOTE: Advisesyou of informationor instructionsvitalto the operationor maintenanceof the equipment.

,_ WARNING: Donot attempt tooperatethis tool

untilyou have read thoroughlyand understand

completely all instructions,safety rules,etc, contained in thismanual, Failure to comply can

resultin accidents involvingfire, electdc shock, or sadous personal injury.Save owner'smanual

and review frequently for continuingsafe operation,and instructingotherswho may use

thistool.

READ ALL INSTRUCTIONS

KNOW YOUR POWER TOOL. Rood owner's manualcarefully.Learn itsapplicationsand

limitationsas well as the specificpotential hazards related to thistool.

GUARD AGAINST ELECTRICAL SHOCK by preventingbodycontactwithgmundeqsurfaces, For example: Pipes, radiators,ranges, refrigera-

tor enclosures,

• KEEP WORK AREA CLEAN. Clutteredareas and benches Invite accidents.

• AVOID DANGEROUS ENVIRONMENT. Don't

usepower toolindamporwet locations or exposeto rain. Keep work area well lit, •

• KEEP CHILDREN AND VISITORS AWAY. All visitorsshouldwear safetyglasses and be kepta

safe distancefromworkarea, Do not letvisitors • contact tool or extensioncord.

STORE IDLE TOOLS. When notinusatools shouldbe stored in a dry and highor locked-up

place - out ofthe reach ofchildren, DON'T FORCE TOOL. It willdo the job better

and saferatthe rate for whichitwas designed.

SAFETY ALERT SYMBOL: Indicatescautionor warning.May be used inconjunctionwithothersymbolsor pictographs,

WARNING: Failuretoobey a safetywarningcan resultin serious Injurytoyoumelforto others. Alwaysfollowthe safety precautionsto reducethe dskoftire, electricshockand personalinjury,

CAUTION: Failuretoobey a safetywarning may resultin propertydamage or personal injuryto yourselfor toothers.Alwaysfollow the safety precautionsto reducethe riskof fire,electdcshock

and personal injury.

USE RIGHT TOOL. Don't force smalltool or

attachmentto do the jobof a heavydutytool.

Don'tuse toolfor purpose netintended- for example- A circularsaw shouldneverbe used

for ct._ingtree limbsor logs.

WEAR PROPER APPAREL. Do not wear loose clothingor jewelrythat can get caught intool's

movingpartsand cause personal injury,Rubber glovesand nonskidfootwearare recommended when workingoutdoors.Wear protectivehair covetingtocontain longhairandkeep itfrom being drawn into nearbyairvents,

ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses have only impact-resistantlenses;

they are NOT safety glasses,

PROTECT YOUR LUNGS. Wear a face mask or dustmask if operationisdusty.

PROTECT YOUR HEARING. Wear hoofing protectiondudngextended periodsof operation.

SECURE WORK. Use clamps or a visa tohold work.It's saferthanusingyour handanditfrees bothhands tooperate tool.

DON'T OVERREACH. Keep properfooting and balance at all times. Do net use ona ladder or

unstable support.

MAINTAIN TOOLS WITH CARE. Keep tools sharpat all times, and cleanfor best and safest

performance. Follow instructionsfor lubricating

and changingaccessories.

REMOVE ADJUSTING KEYS AND

WRENCHES. Formhabitofcheckingto see that

keys and adjustingwrenchesare removed from

tool before turningit on.

RULES FOR SAFE OPERATION (Continued)

NEVER USE IN AN EXPLOSNE ATMO- SPHERE. Normal sparkingof the motor could

igniteflammableliquids,gases, or fumes.

KEEP HANDLES DRY, CLEAN, AND FREE M FROM OIL AND GREASE. Always use a clean

clothwhen cleaning.Never use brakefluids. M gasoline, petroleum-basedproductsor any

strongsolventsto clean yourtool.

STAY ALERT. Watch what you are doingand use commonsense, Do not operatetoolwhen you ara tired, Do not rush,

CHECK DAMAGED PARTS. Befora further use ofthe tool,a guard or other part thatis damaged

shouldbe carefullychecked todeterminethat it willoperate properlyand performits intended

function.Chockfor alignmentof movingparts, • bindingof moving parts, breakage of parts,

mounting,and any other conditionsthat may

affect itsoperation.A guard or otherpartthat is damaged shouldbe pmparlyrepairedor M raplaced byan authorizedservicecenter unless

indicatedelsewhere in this instructionmanual,

DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches

replaced by an authorizedservice center, DRUGS, ALCOHOL, MEDICATION. Do not

operatetoolwhile under the influenceof drugs, alcohol,or any medication,

DRILLING OR DRNING SCREWS INTO ELECTRICAL WIRING IN WALLS, CEILINGS,

OR OTHER AREAS CAN CAUSE THE BIT OR CHUCK TO BECOME ELECTRICALLY LIVE.

Do nottouchmetal parts when drillingintoa wall; grasponly the insulatedhandle(s)orplastic

housingwhen usingthistool, Make surehidden

electdcalwiring,water pipes,and mechanical

hazardsare not inthe path oftha bitwhen

drillingintoa wall.

B INSPECT FOR and removeall nailsfrom lumber

beforedrilling,

IMPORTANT SAFETY RULES FOR BATrlERY TOOLS

Batterytoolsdo not hoveto be pluggedintoan electrical outlet;therefore, they are always in operatingcondition. Be aware of possible hazards when not usingyour batterytool or when changingaccessodes.

M USE ONLY THE CHARGER PROVIDED WITH

YOUR BATTERY TOOL, Do not substituteany othercharger. Use ofanother chargercould cause bettedes to explode causingpossible

serious injury.

DO NOT PLACE BAI-FERY TOOLS OR THEIR BAI"FERIEB NEAR FIRE OR HEAT. They may explode.

DO NOT CHARGE BATTERY TOOL IN A DAMP OR WET LOCATION.

Your batterytool shouldbe charged ina location where the temparatum is morethan50°F but

lessthan 100°F, Under extreme usageor temperatureconditions,

battery leakage may occur.If liquidcomes in contactwithyour skin,wash immediatelywith

soap and water, then neutralizewith lemonjuice or vinegar.If liquidgets inyoureyes, flushthem

with cleanwater for at least 10 minutes, then

seek immediatemedical attention. Ifcarrying yourbatterytool at yourside, make

sureit is notrunning and your fingeris noton the switch.Avoidaccidentalstarting.

SECURE WORK before applyingpower, NEVER holdworkpieceinyour handoracrossyour legs,

WHEN SERVICING USE ONLY IDENTICAL

CRAFTSMAN REPLACEMENT PARTS.

IMPORTANT SAFETY INSTRUCTIONS FOR

CHARGER

• SAVE THESE INSTRUCTIONS. This manual

containsimportantsafetyandoperating instructionsfor batterychargerpart number 999555-008.

Before usingbatterycharger, read all instructions and cautionary maddngsin this manual, on

battery charger, and productusingbattery

charger,

_i, WARNING: To reduce riskof injury,chargeonly

nickel.cadmiumtype rachargeablebatteries. Other typesof pattedes may burstcausing

personalinjuryand damage.

Do note_pose chargerto rain or snow.

Use of an attachmentnotrecommendedor sold by the batter/chargermanufacturermay result

in a dskoffire, electricshock, or injuryto

parsons.

To reduce dskof damage to chargerbody and cord, pullby chargerbodyratherthan cord when disconnectingcharger,

Make sure cord is locatedso that it willnotbe steppedon, tdppadover, or othe_visesubjected

to damage or stress.

RULESFORSAFEOPERATION(ConUnued)

An extensioncordshouldnot be used unless

absolutelynecessary. Usa of improper extensioncordcouldresult in a riskof fire and

electdc shock.If extensioncordmust be used, make sure:

a, That pinson plugofextensioncord are the

same number, size and shape as thoseof plug on charger.

b. That extensioncordis propedywiredand in

goodelectricalcondition; and

c. That wire size is large enough for AC

ampere ratingofchargeras specified

below:

Cord Length(Feet) 25ft, 50ft, 100ft. 150ft, Cord Size (AWG) 16 16 16 14

Note: AWG = Amedoan Wire Gage

• DO NOT OPERAI_ CI'IARGER WITH A

DAMAGED CORD OR PLUG. If damaged,have replacedimmediatelyby a qualifiedserviceman.

A Look for this symbol to point out important safety precautions. It means attentionlll Your

safety is involved.

Do notoperatechargerif it has receiveda sharpblow, been dropped,or otherwise damaged in any way; take itto a qualified

serviceman, Do not disassembJecharger,take itto a

qualifiedservicemanwhen sawice or repairis

required. Incorrectreassemblymay resultina riskofelectricshockor fire,

To reducedsk ofelectdcshock,unplugcharger

from outletbefore attemptingany maintenance

or cleaning.Turningoff controls will notreduce thisrisk.

• Do notuse chargeroutdoors.

• Disconnectchargerfrom powersupplywhen

not in use.

SAVE THESE INSTRUCTIONS. Refer to them

frequently and usethem to instructotherswho

may usethistool. If you loansomeone thistool, loanthem these instructionsalso.

IMPORTANT INFORMATION FOR RECHARGING HOT BA'n'ERIES

When usingyourdrillcontinuously,the hattedes in your batterypack willbecomehot.You shouldlet a

hot batterypeck cool downfor appreximately30 minutesbefore attemptingto recharge,

Note; Thissituationonlyoccurswhen continuoususa ofyour drillcausesthe batteriesto become hot. It

A WARNING:

The operationof any powertoolcan resultinforeign objects beingthrownintoyoureyes, whichcan resultin severeeye damage. Before beginningpower tcol operation, alwayswear

safetygogglesorsafety glasseswith side shieldsand a full face shieldwhen needed, We recommendWide VisionSafety Mask for useovereyeglasses or standard safetyglasses

with sideshields,availableat Sears Retail Stores.

does notoccurundernormalciroumstances.Referto "CHARGING BA'rrERY PACK" for normalrecharg-

ingof batteries,If the chargerdoes notcharge your battery peck undernormalcircumstances,ratum both the batterypack and chargerto yournearest Soars repair centerfor electricalchock.

+ 11 hidden pages