Craftsman 315175340 Owner’s Manual

Operator's Manual

ICRRFTSMRN'I

ROUTER

Double Insulated

Model No.

315.175340

Save this manual for future reference

_, CAUTION: Read and follow all safety

rules and operating instructions before first use of this product.

Customer Help Line: 1-800-932-3188

Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA

Visit the Craftsman Web page: www.sears.com/craftsman

CQUS

983000-176

1-03

• Warranty...................................................................................................................................................................2

• Introduction...............................................................................................................................................................2

• GeneralSafetyRules...............................................................................................................................................3

• SpecificSafetyRules...............................................................................................................................................4

• Symbols....................................................................................................................................................................5

• Specifications...........................................................................................................................................................6

• Electrical...................................................................................................................................................................6

• Unpacking.................................................................................................................................................................7

• Features...................................................................................................................................................................8

• Adjustments.........................................................................................................................................................9-13

• Operation...........................................................................................................................................................14-17

• Maintenance...........................................................................................................................................................18

• Accessories............................................................................................................................................................19

• ExplodedViewandRepairPartsList................................................................................................................20-21

• CustomerServiceInformation................................................................................................................................22

FULLONEYEARWARRANTYONCRRFT,_MRNROUTER IfthisCRnFTSMnMtoolfailstogivecompletesatisfactionwithinoneyearfromthedateofpurchase,returnit to

thenearestSearsstoreintheUnitedStates,andSearswillrepairit,freeofcharge.

IfthisI"RnPTSMRN tool is used for commercial or rental purposes, this warranty applies for only 90 days from the

date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179

Your router has many features for making routing operations more pleasant and enjoyable. Safety, performance and dependability have been given top priority in the design of this product, making it easy to

maintain and operate.

_, Look for this symbol to point out important safety precautions. It means attention!!!

Your safety is involved.

,_ WARNING:

The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1.

,_ WARNING: Do not attempt to use this product

until you thoroughly read and completely understand the operator's manual. Pay close attention to the safety rules, including Dangers, Warnings, and Cautions. If you use this product properly and only as intended, you will enjoy years

of safe, reliable service.

WARNING: Read and understand all instructions. Failure to follow all instructions listed

below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS WORK AREA

• Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable liquids, gases, or dust. Power tools may create

sparks which may ignite the dust or fumes.

• Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insula-

tion [] eliminates the need for the three-wire

grounded power cord and grounded power supply system.

• Avoid body contact with grounded surfaces, such

as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is

grounded.

• Don't expose power tools to rain or wet conditions. Water entering a power toolwill increase the risk of elec-

tric shock.

• Do not abuse the cord. Never use the cord to carry

the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged

cords increase the risk of electric shock.

• When operating a power tool outside, use an out- door extension cord marked "W-A" or "W". These

cords are rated for outdoor use and reduce the risk of electric shock.

PERSONALSAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do

not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inatten-

tionwhile operating power tools may result inserious

personal injury.

• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, cloth-

ing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught inmoving parts.

Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger

on the switch or plugging in tools that have the switch on, invites accidents.

• Remove adjusting keys or wrenches before

turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance

enables better control of the tool in unexpected situations. Do not use on a ladder or unstable sup- port.

Use safety equipment. Always wear eye protec- tion. Dust mask, non-skid safety shoes, hard hat, or

hearing protection must be used for appropriate conditions.

TOOLUSEAND CARE

• Use clamps or other practical way to secure and

support the workpiece to a stable platform.

Holding the work by hand or against your body is unstable and may lead to loss of control.

• Do not force tool. Use the correct tool for your

application. The correct tool will do the job better and safer at the rate for which it is designed.

• Do not use tool if switch does not turn it on or off.

Any tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from power source before making any adjustments, changing accessories,

or storing the tool. Such preventive safety mea-

sures reduce the risk of starting the tool accidentally.

• Store idle tools out of the reach of children and

other untrained persons. Tools are dangerous in the hands of untrained users.

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp

cutting edges are less likely to bind and are easier to control.

• Check for misalignment or binding of moving

parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged,

have the tool serviced before using. Many acci-

dents are caused by poorly maintained tools.

• Use only accessories that are recommended by

the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous

when used on another tool.

SERVICE

• Tool service must be performed only by qualified repair personnel. Service or maintenance performed

by unqualified personnel could result in a risk of injury.

Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the

operator.

ADDITIONAL RULES FOR SAFE OPERATION

• Know your power tool. Read operator's manual

carefully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of

electric shock, fire, or serious injury.

• Always wear safety glasses. Everyday eyeglasses

have only impact-resistant lenses; they are NOT safety glasses. Following this rule will reduce the

risk of serious personal injury.

• Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.

• Protect your hearing. Wear hearing protection

during extended periods of operation. Following this rule will reduce the risk of serious personal injury.

• Inspect tool cords periodically and, if damaged, have repaired at your nearest authorized service center. Constantly stay aware of cord location. Following this rule will reduce the risk of electric

shock or fire.

• Never attempt to use the router motor without first installing it in the fixed base (Model No.

315.175310), D-handle base (Model No.

315.175300), or plunge base (Model No.

315.175320).

• Check damaged parts. Before further use of the

tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended func- tion. Check for alignment of moving parts, bind- ing of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center. Following this rule will

reduce the risk of shock, fire, or serious injury.

• De net abuse cord. Never carry the tool by the cord or yank it to disconnect it from the recep- tacle. Keep cord away from heat, oil, and sharp edges. Following this rule will reduce the risk of

electric shock or fire.

• When servicing a tool, use only identical replace- ment parts. Follow instructions in the Mainte-

nance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions

may create a risk of electric shock or injury.

• Make sure your extension cord is in good condi-

tion. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. A wire gage size (A.W.G.) of at

least 14 is recommended for an extension cord 50 feet or less in length. A cord exceeding 100 feet is

not recommended. If in doubt, use the next heavier gage. The smaller the gage number, the

heavier the cord. An undersized cord will cause a

drop in line voltage resulting in loss of power and overheating.

• Inspect for and remove all nails from lumber before using this tool. Following this rule will reduce the risk of serious personal injury.

• Drugs, alcohol, medication. Do not operate tool

while under the influence of drugs, alcohol, or any medication. Following this rule will reduce the

risk of electric shock, fire, or serious personal injury.

• Save these instructions. Refer to them frequently

and use them to instruct others who may use this tool. If you loan someone this tool, loan them

these instructions also.

WARNING: Some dust created by power sanding,

sawing, grinding, drilling, and other construction activities contains chemicals known to cause

cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

SAVE THESE INSTRUCTIONS

Important:Someofthefollowingsymbolsmaybeusedonyourtool.Pleasestudythemandlearntheirmeaning. Properinterpretationofthesesymbolswillallowyoutooperatethetoolbetterandsafer.

SYMBOL NAME DESIGNATION/EXPLANATION

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

min Minutes Time

Alternating Current Type or a characteristic of current

no No Load Speed Rotational speed, at no load

[] Class 11Construction Double-insulated construction

/min Per Minute Revolutions, reciprocations, strokes,

surface speed, orbits, etc. per minute

,_ Alert Precautions that involve

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the

explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves

eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

,_ DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or

i_ WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in serious injury.

serious injury.

Safety safetyyour

Wet Conditions Alert Do not expose to rain or use in damp

locations.

,_ CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or

moderate injury. It may also be used to alert against unsafe practices that may cause property damage.

Important: Advises you of important information or instructions vital to the operation or maintenance of the equipment.

Note: Advises you of additional informationconcerning the operation or maintenance of the equipment.

DepthofCut(FixedBase&D-handleBase).......1-1/2in

DepthofPlunge(PlungeBase).................................2in.

Collet......................................................................1/4in.

Horsepower....................................................................2

Input.......................120Volts,60Hz,AConly,9.5Amps

NoLoadSpeed..............................................25,000/min

PowerCord..............................................................10ft.

NetWeight.......................................................5lb.6 oz.

DOUBLE INSULATION

Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire

grounded power cord. All exposed metal parts are isolated from the internal metal motor components with

protecting insulation. Double insulated tools do not need to be grounded.

Important: Servicing of a tool with double insulation requires extreme care and knowledge of the system and

should be performed only by a qualified service technician. For service, we suggest you return the tool

to your nearest authorized service center for repair. When servicing, use only identical Craftsman

replacement parts.

,_ WARNING: The double insulated system is

intended to protect the user from shock resulting from a break in the tool's internal wiring. Observe all normal safety precautions to avoid electrical

shock.

ELECTRICAL CONNECTION The router has a precision built electric motor. It should

be connected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If your tool does not operate when plugged into an outlet, double-check the power supply.

EXTENSION CORDS

The use of any extension cord will cause some loss of

power. To keep the loss to a minimum and to prevent

tool overheating, use an extension cord that is heavy

enough to carry the current the tool will draw. A wire gage size (A.W.G.) of at least 14 is

recommended for an extension cord 50 feet or less in

length. When working outdoors, use an extension cord that is suitable for outdoor use. This type of cord is designated with "WA" on the cord's jacket.

,_1i CAUTION: Keep extension cords clear of the

working area. While you are working with a power tool, position the cord so that it will not get caught

on lumber, tools, or other obstructions.

,_ WARNING: Check extension cords before each

use. If damaged, replace them immediately. Never use a damaged cord with this tool. Touching the damaged area could cause serious injury due to

electrical shock.

Extension cords suitable for use with your tool are

available at your nearest Sears retail store.

INSTRUCTIONS

• Carefully remove the tool and the accessories from the box.

• Make sure that all items listed in the packing list are included.

• Inspect the tool carefully to be sure no breakage or damage occurred during shipping.

• Do not discard the packing material until you have carefully inspected and satisfactorily operated the

tool.

• If any parts are damaged or missing, please call

1-800-932-3188 for assistance.

PACKING LIST

Router Motor

Wrench Operator's Manual

,_h WARNING: If any parts are missing, do not

operate your tool until the missing parts are replaced. Failure to do so could result in serious

personal injury.

,_ WARNING: The router should never be

connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool prevents accidental starting that could cause serious injury.

+ 15 hidden pages