![](/html/84/8404/840479a9ac80c40872c5dd1d683837d1f3193279bd739997c89b835d9d2c5cbc/bg1.png)
620263-963
SEARS
OWNERS
MANUAL
MODEL NO.
315.11690
CAUTION'
Read Rules for
Safe Operation
and Instructions
Carefully
SAVE THIS
MANUAL FOR
FUTURE REFERENCE
®
SANDER
DUAL MOTION
DOUBLE INSULATED
Introduction
Operation
Repair Parts
.'€ % '
<;.{UL)I!;
',_
Designed exclusively for and sold only by
SEARS, ROEBUCK AND CO., Dept. 698/731A, Sears Tower, Chicago, IL 60684
620263,963 PRINTED IN U. S A.
![](/html/84/8404/840479a9ac80c40872c5dd1d683837d1f3193279bd739997c89b835d9d2c5cbc/bg2.png)
FULL ONE YEAR WARRANTY ON CRAFTSMAN SANDER
If this Craftsman Sander fails to give complete satisfaction within one year from date of purchase,
RETURN IT TO THE NEAREST SEARS STORE THROUGHOUT THE UNITED STATES and Sears will
replace it, free of charge.
If this sander is used for commercial or rental purposes this warranty applies for only 90 days from
the date of purchase.
This warranty gives you specific
state to state.
legal rights, and you may also have other rights which vary from
SEARS, ROEBUCK AND CO.
DEPT. 698/731A
SEARS TOWER
CHICAGO, IL 60684
INTROD
DOUBLE INSULATION is a concept in safety, in elec-
tric power tools, which eliminates the need for the
usual three wire grounded power cord and grounded
supply system. Wherever there is electric current in
the tool there are two complete sets of insulation to
protect the user. All exposed metal parts are isolated
from the internal metal motor components with pro-
tecting insulation.
Your sander is suitable for coarse, medium and fine
sanding of wood, metals, and plastics. It will pro-
duce a fine scratch free finish when used with or
against the grain and is designed for sanding flush
to corners.
RULES FOR SAFE OPERATION
WARNING _ DO NOT ATTEMPT TO OPERATE UNTIL YOU HAVE READ THOROUGHLY AND UNDERSTAND
COMPLETELY ALL INSTRUCTIONS, RULES, ETC. CONTAINED IN THIS MANUAL. FAILURE TO COMPLY CAN
RESULT IN ACCIDENTS INVOLVING FIRE, ELECTRIC SHOCK, OR SERIOUS PERSONAL INJURY. SAVE
OWNERS MANUAL AND REVIEW FREQUENTLY FOR CONTINUING SAFE OPERATION, AND INSTRUCTING
POSSIBLE THIRD-PARTY USER.
READ ALL INSTRUCTIONS
UCTION
IMPORTANT -- Servicing of a tool with double in-
sulation requires extreme care and knowledge of the
system and should be performed only by a qualified
service technician. For service we suggest you
return the tool to your nearest Sears Store for repair.
Always use original factory replacement parts when
servicing.
The dual motion feature with which your sander is
equipped is ideal for any sanding operation where a
pad sander is required. Orbital motion is ideal for
fast cutting action when removing old finishes,
smoothing rough wood, cutting stock down to re-
quired dimensions or for finishing surface to be
painted. Straight line is best for fine finish sanding
on work to be stained or varnished.
1. KNOW YOUR POWER TOOL -- Read owner's manual carefully. Learn its ap-
plications and limitations as well as the specific potential hazards peculiar to
this tool.
2. GUARD AGAINST ELECTRICAL SHOCK BY PREVENTING BODY CONTACT
WITH.GROUNDED SURFACES. For example: Pipes, radiators, ranges, refrig-
erator enclosures.
3. KEEP GUARDS IN PLACE and in working order.
4. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
5. AVOID DANGEROUS ENVIRONMENT. Don't use power tool in damp or wet
locations or expose to rain. Keep work area well lit.
6. KEEP CHILDREN AWAY. All visitors should be kept safe distance from work
area. Do not let visitors contact tool or extension cord.
7. STORE IDLE TOOLS. When not in use, tools should be stored in dry, high or
locked-up place -- out of reach of children.
8. DON'T FORCE TOOL. It will do the job better and safer at the rate for which it
was designed.
9. USE RIGHT TOOL. Don't force small tool or attachment to do the job of a heavy
duty tool. Don't use tool for purpose not intended - for example - Don't use
a circular saw for cutting tree limbs or logs.
10. WEAR PROPER APPAREL. No loose clothing or jewelry to get caught in moving
parts. Rubber gloves and footwear are recommended when working outdoors.
Also, wear protective hair covering to contain long hair.
Pane "_
![](/html/84/8404/840479a9ac80c40872c5dd1d683837d1f3193279bd739997c89b835d9d2c5cbc/bg3.png)
RULES FOR SAFE OPERATION (Continued)
11. USE SAFETY GLASSES with all tools.
Also face or dust mask if cutting
operation is dusty.
12.
DON'T ABUSE CORD. Never carry tool by cord or yank it to disconnect from
receptacle. Keep cord from heat, oil and sharp edges.
13.
SECURE WORK. Use clamps or a vise to hold work. It's safer than using your
hand and it frees both hands to operate tool.
14.
DON'T OVERREACH. Keep proper footing and balance at all times.
15.
MAINTAIN TOOLS WITH CARE. Keep tools sharp at all times, and clean for best
and safest performance. Follow instructions for lubricating and changing ac-
cessories.
16. DISCONNECT TOOLS. When not in use, before servicing, or when changing at-
tachments, blades, bits, cutters, etc., all tools should be disconnected.
17. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see
that keys and adjusting wrenches are removed from tool before turning it on.
18. AVOID ACCIDENTAL STARTING. Don't carry plugged-in tools with finger on
switch. Be sure switch is off when plugging in.
19. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only
extension cords suitable for use outdoors. Outdoor approved cords are marked
with the suffix W-A, for example -- SJTW-A or SJOW-A.
20. NEVER THIS USE THIS OR ANY POWER SANDER FOR WET SANDING. Failure
to comply can result in electrical shock causing serious injury or worse.
21. KEEP HANDS AWAY FROM SANDING AREA.
22. NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparking of the motor
could ignite fumes.
23. INSPECT TOOL CORDS PERIODICALLY and if damaged, have repaired at your
nearest Sears Repair Center.
24. INSPECT EXTENSION CORDS PERIODICALLY and replace if damaged.
25. KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always
use a clean cloth when cleaning. Never use brake fluid, gasoline, or any strong
solvents to clean your tool.
26. STAY ALERT. Watch what you are doing and use common sense. Do not op-
erate tool when you are tired.
27. CHECK DAMAGED PARTS. Before further use of the tool, a guard or
other part that is damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment of mov-
ing parts, binding of moving parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or other part that is damaged
should be properly repaired or replaced by an authorized service center unless
indicated elsewhere in this instruction manual.
28. DO NOT USE TOOL IF SWITCH DOES NOT TURN iT ON AND OFF. Have
defective switches replaced by authorized service center.
29. Inspect for and remove all nails from lumber before sanding.
30. DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influ-
ence of drugs, alcohol, or any medication.
31. SAVE THESE INSTRUCTIONS.
CAUTION
The operation of any sander can result in foreign objects being thrown in.
to the eyes, which can result in severe eye damage. Always wear safety
glasses or eye shields before commencing power tool operation. We
recommend Wide Vision Safety Mask for use over spectacles, or stan-
dard safety glasses .... available at Sears Catalog Order or Retail Stores.
Page 3