Craftsman 315116271 Owner’s Manual
Owner's Manual
Palm Grip Finishing Sander
Double Insulated
Model No.
315.116271
Save this manual for
future reference.
,_ CAUTION: Read and follow
all Safety Rules and Operating
Instructions before first use of
this product.
Customer Help Line: 1-800-932-3188
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
972000-851
5-01
• Safety
• Features
• Adjustments
• Operation
• Maintenance
• Parts List
®
DOUBLE INSULATION is a concept in safety, in electric
power tools, which eliminates the need for the usual three
wire grounded power cord and grounded supply system.
Wherever there is electric current in the tool there are two
complete sets of insulation to protect the user. All exposed
metal parts are isolatedfrom internalmetal motorcomponents
with protecting insulation.
IMPORTANT - Servicing of a tool with double insulation
requires extreme care and knowledge of the system and
should be performed only by a qualified service technician.
For service we suggest you return the tool to your nearest
Sears Store for repair. Always use original factory
replacement parts when servicing.
WARNING:
Do not attempt to operate this tool until you have read
thoroughly and understand completely all instructions,
safety rules, etc. contained in this manual. Failure to
comply can result in accidents involving fire, electric
shock, or serious personal injury. Save owner's manual
and review frequently for continuing safe operation, and
instructing others who may use this tool.
READ ALL INSTRUCTIONS
KNOW YOUR POWER TOOL. Read owner's
manual carefully. Learn its applications and
limitations as well as the specific potential hazards
related to this tool.
GUARD AGAINST ELECTRICAL SHOCK by
preventing body contact with grounded surfaces.
For example: pipes, radiators, ranges, refrigerator
enclosures,
• KEEP GUARDS IN PLACE and in working order.
• KEEP WORK AREA CLEAN. Cluttered areas and
benches invite accidents.
• AVOID DANGEROUS ENVIRONMENT. Don't use
power tool in damp or wet locations or expose to
rain. Keep work area well lit.
• KEEP CHILDREN AND VISITORS AWAY. All
visitors should wear safety glasses and be kept a
safe distance from work area.
• STORE IDLE TOOLS. When not in use tools
should be stored in a dry and high or locked-up
place - out of the reach of children.
• DON'T FORCE TOOL It will do the job better and
safer at the rate for which it was designed.
• USE RIGHT TOOL. Don't force sma!l tool or
attachment to do the job of a heavy duty tool. Don't
use tool for purpose not intended - for example - A
circular saw should never be used for cutting tree
limbs or logs.
• WEAR PROPER APPAREL. Do not wear loose
clothing or jewelry that can get caught in tool's
moving parts and cause personal injury Rubber
gloves and non-skid footwear are recommended
WARNING:
The double insulated system is intended to protect the
user from shock resulting from a break in the tool's
internal wiring. Observe all normal safety precautions
related to avoiding electrical shock.
when working outdoors. Wear protective hair
covering to contain long hair and keep it from being
drawn into nearby air vents.
• ALWAYSWEARSAFETYGLASSESWITH SIDE
SHIELDS. Everyday eyeglasses have only impact-
resistant lenses; they are NOT safety glasses.
• PROTECT YOUR LUNGS. Wear a face mask or
dust mask if operation is dusty.
• PROTECT YOUR HEARING. Wear hearing
protection during extended periods of operation.
• DON'T ABUSE CORD. Never carry tool by cord or
yank it to disconnect from receptacle. Keep cord
from heat, oil, and sharp edges.
• SECURE WORK. Use clamps or a vise to hold
work. Both hands are needed to operate the tool.
• DO NOT OVERREACH. Keep proper footing and
balance at all times. Do not use on a ladder or
unstable support.
• MAINTAIN TOOLS WITH CARE. Keep tools sharp
and clean for best and safest performance. Follow
instructions for lubricating and changing
accessories,
• DISCONNECT ALL TOOLS. When not in use,
before servicing, or when changing or adjusting
sandpaper, attachments, blades, bits, cutters, etc.,
all tools should bediscon nected from power supply.
• REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed before turning
tool on.
• AVOID ACCIDENTAL STARTING. Don't carry
plugged-in tools with finger on switch. Be sure
switch is off when plugging in.
Page 2
• USE THE PROPER EXTENSION CORD. Make
sure your extension cord is in good condition.
When using an extension cord, be sure to use one
heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating.
A wire gage size (A.W.G.) of at least 16 is
recommended for an extension cord 100 feet or
less in length. A cord exceeding 100 feet is not
recommended. If in doubt, use the next heavier
gage. The smaller the gage number, the heavier
the cord.
• USE ONLY OUTDOOR EXTENSION CORDS with
approved ground connection that are intended for
use outdoors and so marked.
• NEVER USE THIS OR ANY POWER SANDER
FOR WET SANDING OR LIQUID POLISHING.
Failure to comply can result in electrical shock
causing serious injury or worse.
• KEEP HANDS AWAY FROM SANDING AREA.
• NEVER USE IN AN EXPLOSIVE ATMOSPHERE.
Normal sparking of the motor could ignite fumes.
• INSPECTTOOL CORDS PERIODICALLY and, if
damaged, have repaired by a qualified service
technician. Stay constantly aware of cord location.
• INSPECT EXTENSION CORDS PERIODICALLY
and replace if damaged.
• KEEP HANDLES DRY, CLEAN, AND FREE
FROM OIL AND GREASE. Always use a clean
cloth when cleaning. Never use brake fluids,
gasoline, petroleum-based products or any strong
solvents to clean your tool.
• STAY ALERTAND EXERCISE CONTROL. Watch
what you are doing and use common sense. Do
not operate tool when you are tired. Do not rush.
• CHECK DAMAGED PARTS. Before further use of
the tool, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and
any other conditions that may affect its operation.
A guard or other part that is damaged must be
properly repaired or replaced by an authorized
service center to avoid risk of personal injury.
• DO NOT USE TOOL IF SWITCH DOES NOT
TURN IT ON AND OFF. Have defective switches
repraced by an authorized service center.
• INSPECT FOR and remove all nails from lumber
before sanding.
• DRUGS, ALCOHOL, MEDICATION. Do not
operate tool while under the influence of drugs,
alcohol, or any medication.
• WHEN SERVICING USE ONLY IDENTICAL
CRAFTSMAN REPLACEMENT PARTS.
• POLARIZED PLUGS. To reducethe riskof electric
shock, this tool has a polarized plug (one blade is
wider than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.
• SAVE THESE INSTRUCTIONS. Refer to them
frequently and use them to instruct other users. If
you loan someone this tool, loan them these
instructions also.
WARNING:
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
tilter out microscopic particles.
I
A
Look for this symbol to point out important safety precautions. I
It means attention!H Your safety is involved,
Page 3
!
I
CONGRATULATIONS AND THANK YOU FOR BUYING
THIS CRAFTSMAN PALM GRIP FINISHING SANDER.
It has been designed, engineered and manufactured to
provideyou with Sears high standard of dependability, ease
ofoperation, and operator safety. Properly cared for, it will
give you years of rugged, trouble-free performance
CAUTION:
Carefully read through this entire owner's manual before
using your new sander. Pay close attention to the Rules
For Safe Operation, Warnings and Cautions. If you use
your sander properly and only for what it is intended,
you will enjoy years of safe, reliable service.
Your sander has many features for making your sanding
operations more pleasant and enjoyable. Safety,
performance, and dependability have been given top priority
in the design of this sander making it easy to maintain and
operate.
FULL ONE YEAR WARRANTY ON rRnFTSHRN SANDER /
Ifthis CRRFTSH RN Sander fails to give complete satisfaction within one year from the date of purchase, RETURN
IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will replace it, free of charge.
If this I'RI_I:1"$1_111NSander is used for commercial or rental purposes, this warranty applies for only 90 days from
the date of purchase.
This warranty gives you specific Legalrights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., DEPT. 817 WA, Hoffman Estates, IL 60179
Size of Paper 1/4 Sheet
Orbital Motion
Amperes 1.8
Rating 120 Volts, 60 Hz, AC only
No Load Speed 14,000 OPM
Orbital Diameter 1/16 Inch
UNPACKING
Your sander has been shipped completely assembled and
ready for use. After removing it from the box, inspect it
carefully to make sure no breakage or damage has occurred
during shipping and that no parts are missing. If any parts are
damaged or missing, contact your nearest Sears Service
Center or the Service Department at most Sears stores.
SPECIFICATIONS:
J
• Rules for Safe Operation ........................................................................................ 2-3
• Introduction, Product Specifications, and Unpacking ................................................. 4
• Warranty and Table of Contents ................................................................................. 4
• Operation ................................................................................................................ 5-8
• Accessories ............................................................................................................... 9
• Maintenance ............................................................................................................ 10
• Exploded View and Parts List .................................................................................. 11
• Parts Ordering / Service .......................................................................................... 12
WARNING:
The operation of any sander can result in foreign objects being thrown into your eyes which
can result in severe eye damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses
with side shields.
Page 4
Loading...