Craftsman 315115701 Owner’s Manual

PERATOR'S MAN AL

MANUEL DEL OPERADOR

.f,$

19.2 VOLT CORNER SANDER

19,2 VOLTIOS LIJADORA DE ACABADO Model No.

315.115700 NOmero de modelo

315.115701

WARNING: To reduce the risk of injury, the user must read and understand the

operator's manual before using this product.

ADVERTENCIA: Para reducir el

riesgo de lesiones, el usuario debe leer y comprender el manual del operador antes de usar este producto.

Customer Help Line: 1-800-932-3188

Tel_fono de atenci6n al consumidor: 1-800-932-3188

Sears Brands Management Corporation, 3333 Beverly Rd., Hoffman Estates, IL 60179 USA

Visit the Craftsman web page: www.sears.com/craftsman Visite el sitio web de Craftsman: www.sears.com/craftsman

Save this manual for future reference

983000-717 09-01-10 (REV:04)

Guarde este manual para futuras consultas

BATTERIES AND CHARGERS

SOLD SEPARATELY

LAS BATERiAS Y EL CARGADOR

SE VENDEN POR SEPARADO

ENGLISH

ESPANOL

[] Warranty ....................................................................... 2

[] Introduction .................................................................. 2

[] General Safety Rules ................................................. 3-4

[] Specific Safety Rules .................................................... 4

[] Symbols ........................................................................ 5

[] Features ........................................................................ 6

[] Assembly ...................................................................... 6

[] Operation ................................................................... 7-8

[] Maintenance ................................................................. 9

[] Illustrated Parts List .................................................... 10

[] Figure Numbers (Illustrations) ......................................... i

[] Parts Ordering/Service .................................. Back Page

CRAFTSMAN ®ONE YEAR LIMITED WARRANTY FOR ONE YEAR from the date of purchase, this product iswarranted against any defects in material or workmanship.

With proof of purchase, defective product will be replaced free of charge. For warranty coverage details to obtain free replacement, visit the web site: www.craftsman.com

This warranty does not cover sanding sheets, which are expendable parts that can wear out from normal use within the warranty period.

This warranty is void if this product is ever used while providing commercial services or if rented to another person. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears Brands Management Corporation, Hoffman Estates, IL 60179

[] Garant[a ........................................................................ 2

[] Introducci6n .................................................................. 2

[] Reglas de seguridad generales ................................. 3-4

[] Reglas de seguridad espec[ficas .................................. 4

[] S[mbolos ....................................................................... 5

[] Caracter[sticas .............................................................. 6

[] Armado ......................................................................... 6

[] Funcionamiento ......................................................... 7-8

[] Mantenimiento .............................................................. 9

[] Figura numeras (ilustraciones) ........................................ i

[] Pedidos de piezas / Servicio .................... P_g. posterior

GARANT(A LIMITADA DE CRAFTSMAN POR UN ANO Este producto tiene garant[a por cualquier defecto en material o mano de obra DURANTE UN ANO desde la fecha de

compra. Los productos defectuosos se remplazar_n sin cargo si presenta un comprobante de pago. Si desea conocer los detal(es de la cobertura de la garant(a para conseguir reparaciones o recambios, visite el

sitio Web: www.craftsman.com Esta garant[a no cubre la hoja de lija, que es una pieza fungible que puede desgastarse por el uso normal durante el

per[odo de garant[a. La garant[a pierde validez si este producto se utiliza mientras se prestan servicios comerciales o si se alquila a otra

persona. Esta garant[a le otorga derechos legales espec[ficos y tambi_n puede gozar de otros derechos que var[an seg0n el

estado. Sears Brands Management Corporation, Hoffman Estates, IL 60179

This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.

Esta herramienta ofrece numerosas caracter[sticas para hacer m_s agradable y placentero su uso. En el diseSo de este producto se ha conferido prioridad a la seguridad, el desempeSo y la fiabilidad, por Io cual se facilita su manejo y mantenimiento.

Page 2

WARNING! Read all safety warnings and instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains- operated (corded) power tool or battery-operated (cordless)

power tool. WORK AREA SAFETY

== Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

== Do not operate power tools in explosive

atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

== Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY == Power tool plugs must match the outlet. Never

modify the plug inany way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk

of electric shock.

==Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body

is earthed or grounded.

== Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

== Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric shock.

==When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

== if operating a power tool in a damp location is

unavoidable, use a ground fault circuit interrupter (6FCl) protected supply. Use of a GFCI reduces the risk

of electric shock.

[] Use battery operated tool only with specifically

designated battery pack. Use of any other batteries may create a risk of fire.

[] For use with 19.2V nickel-cadmium and 19.2V lithium-

ion battery packs, see tool/appliance/battery pack/

charger correlation supplement 988000-272. PERSONAL SAFETY [] Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under the

influence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in

serious personal injury.

[] Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce

personal injuries.

[] Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the

switch or energising power tools that have the switch

on invites accidents.

[] Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal injury.

[] Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power tool in unexpected situations.

[] Dress properly. Do not wear loose clothing or

jeweller/. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

[] If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection can reduce dust-related hazards.

[] Do not wear loose clothing or jewelry. Contain long

hair. Loose clothes, jewelry, or long hair can be drawn into air vents.

[] Do not use on a ladder or unstable support. Stable

footing on a solid surface enables better control of the

power tool in unexpected situations.

POWER TOOL USE AND CARE

[] Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was designed.

[] Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be repaired.

[] Disconnect the plug from the power source and/or

the battery pack from the power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

[] Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

[] Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any other condition that may affect the power tool's

operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly

maintained power tools.

Page 3 - English

[]

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

[] Use the power tool, accessories and tool bits etc., []

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

BATTERY TOOL USE AND CARE [] Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack. [] Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire. [] When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another. Shorting the battery terminals together may cause

burns or a fire. Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or

burns.

SERVICE

[] Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

[] When servicing a power tool, use only identical

replacement parts. Follow instructions in the Maintenance section of this manual. Use of

unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury.

[] Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting

accessory contacting a "live" wire may make exposed

metal parts of the power tool "live" and could give the

operator an electric shock. [] Know your power tool. Read operator's manual

carefully. Learn its applications and limitations, as

well as the specific potential hazards related to this

power tool. Following this rule will reduce the risk of

electric shock, fire, or serious injury. [] Always wear eye protection with side shields

marked to comply with ANSI Z87.1. Following this

rule will reduce the risk of serious personal injury.

[] Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the

risk of serious personal injury.

[] Protect your hearing. Wear hearing protection

during extended periods of operation. Following this

rule will reduce the risk of serious personal injury.

[] Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in

operating condition. Be aware of possible hazards

when not using your battery tool or when changing

accessories. Following this rule will reduce the risk of

electric shock, fire, or serious personal injury. [] Do not place battery tools or their batteries near

fire or heat. This will reduce the risk of explosion and

possibly injury.

[] Do not crush, drop or damage battery pack. Do

not use a battery pack or charger that has been

dropped or received a sharp blow. A damaged

battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.

[] Batteries can explode in the presence of a source

of ignition, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product

in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with

water immediately.

[] Do not charge battery tool in a damp or wet

location. Following this rule will reduce the risk of electric shock.

[] For best results, your battery tool should be

charged in a location where the temperature is more than 50°F but less than 100°F. To reduce the

risk of serious personal injury, do not store outside or in

vehicles.

[] Under extreme usage or temperature conditions,

battery leakage may occur, if liquid comes in contact with your skin, wash immediately with soap

and water, if liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek

immediate medical attention. Following this rule will reduce the risk of serious personal injury.

[] Save these instructions. Refer to them frequently

and use them to instruct others who may use this

tool. If you loan someone this tool, loan them these

instructions also to prevent misuse of the product and possible injury.

Page 4 - English

Thefollowingsignalwordsandmeaningsareintendedtoexplainthelevelsofriskassociatedwiththisproduct.

SYMBOL SIGNAL MEANING

,,_ DANGER:

,_ WARNING:

,_ CAUTION:

CAUTION:

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

SYMBOL

Safety Alert

Read The Operator's Manual

NAME

Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.

(Without Safety Alert Symbol) Indicates a situation that may result in property damage.

DESIGNATION/EXPLANATION

Precautions that involve your safety.

To reduce the risk of injury, user must read and understand operator's manual before using this product.

min

n o

.../min

Wet Conditions Alert

Eye Protection

Recycle Symbols

Volts Minutes

Direct Current

No Load Speed

Per Minute

Do not expose to rain or use in damp locations.

Always wear eye protection with side shields marked to comply with ANSI Z87.1.

This product uses nickel-cadmium and lithium-ion batteries. Local, state or federal laws may prohibit disposal of batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.

Voltage Time

Type or a characteristic of current

Rotational speed, at no load

Revolutions, strokes, surface speed, orbits etc., per minute

Page 5 - English

PRODUCTSPECIFICATIONS

Motor...................................................................................................................................................................19.2VoltDC

Orbits Per Minute ..................................................................................................................................... 11,000 r/rain. (RPM)

KNOW YOUR CORNER SANDER

See Figure 1, page L

The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you areattempting. Before use of this product, familiarize yourself with all operating features and safety rules.

ORBITAL SANDING ACTION The oscillating action of your sander produces a very

quick, small circular motion of the sanding pad. The motion is ideal for producing a fine finished grain.

UNPACKING ,_ This product has been shipped completely assembled.

[] Carefully remove the tool and any accessories from the

box. Make sure that all items listed in the packing list

are included.

WARNING: Do not use this product if it is not

completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled could result in serious personal injury.

[] Inspect the tool carefully to make sure no breakage or

damage occurred during shipping. [] Do not discard the packing material until you have

carefully inspected and satisfactorily operated the tool. [] If any parts are damaged or missing, please call

1-800-932-3188 for assistance.

QUICK CHANGE HOOK=AND=LOOP PAD The hook-and-loop design allows for quick change of

sanding sheets and scrubbing pads. It also enables you to easily clean and reuse them.

TRI=FLEX PAD DESIGN The top two-thirds of each sanding sheet is a detachable

triangle that can be rotated to extend its life and promote even wear.

WARNING: If any parts are damaged or missing do

not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.

WARNING: Do not attempt to modify this tool

or create accessories not recommended for use with this tool. Any such alteration or modification is

misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING: To prevent accidental starting that

could cause serious personal injury, always remove

the battery pack from the product when assembling

parts.

PACKING LIST Corner Sander

60-grit Sanding Sheet 120-grit Sanding Sheet 240-grit Sanding Sheet Operator's Manual

Page 6 - English

+ 14 hidden pages