Craftsman 315114840 Owner’s Manual

MANUAL

19.2 VOLT HAMMER DRILL 1/2 in. Variable Speed

Model No.

315.114840

WARNING: To reduce the risk of injury, the user must read and understand the

operator's manual before using this product.

Customer HeUpLine: 1-800-932-3188

Sears, Roebuck and Co., 3333 Bevedy Rd., Hoffman Estates, IL 60179 USA

Visit the Craftsman web page: www.sears.com!craftsman

983000-487

8-04

Save this manual for future reference

ONE YEAR FULL WARRANTY ON CRAFTSMAN TOOL (f th(s Craftsman too( fails to g(ve comp(ete satisfact(on within one year from date of purchase, RETURN (T TO THE

NEAREST SEARS STORE OR SEARS PARTS & REPAIR CENTER (N THE UNITED STATES, and Sears w(Urepa(r (t,

free of charge.

(f this Craftsman too( is used for commercial or rental purposes, th(s warranty applies for only 90 days from the date of purchase.

This warranty gives you spec(fic (ega( rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and 0o., Dept. 817WA, Noffrnan Estates, (L 60179

This too( has many features for making its use more p(easant and enjoyab(e. Safety, performance, and dependability

have been given top priority in the design of th(s product making it easy to maintain and operate.

_ WARNING!READANDUNDERSTANDALL

iNSTRUCTiONS.Failuretofollowallinstructions listedbelow,mayresultinelectricshock,fireand/or

seriouspersonalinjury.

SAVE THESE mNSTRUCTmONS

WORK AREA

[] Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents.

[] Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable

liquids, gases, or dust. Power tools create sparks

which may ignite the dust or fumes.

[] Keep bystanders, children, and visitors sway while

operating s power tool. Distractions can cause you to

lose control.

ELECTRmCAL SAFETY

[] A battery operated tool with integral batteries or s

separate battery pack must be recharged only with

the specified charger for the battery. A charger that

may be suitable for one type of battery may create a risk of fire when used with another battery.

[] Use battery operated tool only with specifically

designated battery pack. Use of any other batteries may create a risk of fire.

[] Use battery only with charger listed.

MODEL BATTERY PACK CHARGER

315.114840 item no. 9 11375 item no. -911401 1323903 or 1323517 1425301

[] Do not abuse the cord. Never use the cord to carry

the charger. Keep cord away from heat, oil, sharp

edges, or moving parts. Replace damaged cords immediately. Damaged cords may create a fire.

PERSONAL SAFETY

[] Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inatten- tion while operating power tools may result in serious

personal injury.

[] Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts.

[] Avoid accidental starting. Be sure switch is inthe

locked or off position before inserting battery pack.

Carrying tools with your finger on the switch or insert-

ingthe battery pack into a too! with the switch on

invites accidents.

[] Remove adjusting keys or wrenches before turning

the tool on. A wrench or a key that is left attached to a

rotating part of the tool may result in personal injury.

[] Do not overreach. Keep proper footing and balance

st all times. Proper footing and balance enable better control of the too! in unexpected situations.

[] Use safety equipment. Always wear eye protection.

Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

[] Do not wear loose clothing or jewelry. Contain long

hair. Loose clothes, jewelry, or long hair can be drawn into air vents.

[] Do not use on s ladder or unstable support. Stable

footing on a solid surface enables better control of the tool in unexpected situations.

TOOL USE AND CARE

[] Use clamps or other practical way to secure and

support the workpiece to s stable platform. Holding the work by hand or against your body is unstable and

may lead to loss of control.

[] Do not force tool. Use the correct tool for your

application. The correct too! will do the job better and safer at the rate for which it is designed.

[] Do not use tool if switch does not turn it on or off. A

tool that cannot be controlled with the switch is dangerous and must be repaired.

[] Disconnect battery pack from tool or place the

switch in the locked or off position before making any adjustments, changing accessories, or storing

the tool. Such preventive safety measures reduce the

risk of starting the tool accidentally.

[] Store idle tools out of reach of children and other

untrained persons. Tools are dangerous in the hands

of untrained users.

[] When battery pack is not in use, keep it away from

other metal objects like: paper clips, coins, keys,

nails, screws, or other small metal objects that can make a connection from one terminal to another.

Shorting the battery terminals together may cause sparks, burns, or a fire.

[] Maintain tools with care. Keep cutting tools sharp

and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to

control.

[] Check for misslignment or binding of moving parts,

breakage of parts, and any other condition that may affect the tool's operation, if damaged, have

the tool serviced before using. Many accidents are caused by poorly maintained tools.

[] Use only accessories that are recommended by the

manufacturer for your model. Accessories that may be suitable for one too! may create a risk of injury when

used on another too!.

[] Keep the tool and its handle dry, clean and free

from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-

based products, or any strong solvents to clean your

too!. Following this rule wil! reduce the risk of loss of control and deterioration of the enclosure plastic.

SERVmCE

[] Tool service must be performed only by qualified

repair personnel. Service or maintenance performed

by unqualified personne! may result in a risk of injury.

[] When servicing a tool, use only identical replace-

ment parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance hstructions may create a

risk of shock or injury.

[] Homdtoom by insumatedgripping surfaces when

performing an operation where the cutting toommay

contact hidden wiring. Contact with a "live" wire will also make exposed metal parts of the tool "live" and

shock the operator.

[] Know your power tool. Read operator's manual

carefully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rute will reduce the risk of electric shock, fire, or serious injury.

[] Always wear safety glasses with side shields.

Everyday glasses have only impact resistant lenses.

They are NOT safety glasses. Following this rule wil!

reduce the risk of eye injury.

[] Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards

when not using your battery tool or when changing accessories. Following this rule wil! reduce the risk of

electric shock, fire, or serious personal injury.

[] Do not place battery tools or their batteries near

fire or heat. This will reduce the risk of explosion and

possibly injury.

[] Never use a battery that has been dropped or

received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or dam=

aged battery immediately.

[] Batteries vent hydrogen gas and can explode in

the presence of a source of ignition, such as a pilot

light. To reduce the risk of serious persona! injury,

never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.

[] Do not charge battery tool in a damp or wet

location. Fol!owing this rule will reduce the risk of electric shock.

[] For best results, your battery tool should be

charged in a location where the temperature is

more than 50°F but less than 100°F. Do not store outside or in vehicles.

[] Under extreme usage or temperature condi-

tions, battery leakage may occur, if liquid comes

in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar, if liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek

immediate medical attention. Following this rule will

reduce the risk of serious personal injury.

_ WARNING! READ AND UNDERSTAND ALL

iNSTRUCTiONS° Failure to follow all instructions listed below, may result in electric shock, fire

and/or serious personal injury.

[] Before using battery charger, read al! instructions

and cautionary markings inthis manual, on battery charger, battery, and product using battery to prevent

misuse of the products and possible injuryor damage.

CAUTION: To reduce the risk of electric shock or

damage to the charger and battery, charge only nickel=cadmium rechargeable batteries as specifi=

cally designated on your charger. Other types of batteries may burst, causing personal injuryor

damage.

[] Do not use charger outdoors or expose to wet or

damp conditions. Water entering charger will increase the risk of electric shock.

[] Use of an attachment not recommended or sold

by the battery charger manufacturer may result in

a risk of fire, electric shock, or injury to persons.

Following this rule will reduce the risk of electdc shock,

fire, or serious personal injury.

[] Do not abuse cord or charger. Never use the cord to

carry the charger. Do not pull the charger cord rather than the plug when disconnecting from receptacle.

Damage to the cord or charger could occur and create

an electric shock hazard. Replace damaged cords ira=

mediately.

[] Make sure cord is located so that it will not be

stepped on, tripped over, come in contact with sharp edges or moving parts or otherwise subject-

ed to damage or stress. This wil! reduce the risk of accidental fails, which could cause injury, and damage

to the cord, which could result in electric shock.

[] Keep cord and charger from heat to prevent

damage to housing or internal parts.

[] Do not let gasoline, oils, petroleum=based products,

etc. come in contact with plastic parts. They contain chemicals that can damage, weaken, or destroy plastic.

[] An extension cord should not be used unless

absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If

extension cord must be used, make sure:

a. That pins on plug of extension cord are the

same number, size and shape as those of plug on charger.

b. That extension cord is properly wired and in

good electrical condition; and

c. That wire size is large enough for AC ampere

rating of charger as specified below:

Cord Length (Feet) 25' 50' 100' Cord Size (AWG) 16 16 16

NOTE: AWG = American Wire Gauge

[] Do not operate charger with a damaged cord or

plug, which could cause shorting and electric shock. If damaged, have the charger replaced by an authorized

serviceman.

[] Do not operate charger if it has received a sharp

blow, been dropped, or otherwise damaged in any way. Take itto an authorized serviceman for electrical check to determine if the charger is in good working

order.

[] Do not disassemble charger. Take it to an authorized

serviceman when service or repair is required. Incor-

rect reassembly may result in a risk of electric shock or fire.

[] Unplug charger from outlet before attempting any

maintenance or cleaning to reduce the risk of electric shock.

[] Disconnect charger from the power supply when

not in use. This wi[! reduce the risk of electric shock or damage to the charger if metal items should fail into

the opening. It also wi[! help prevent damage to the charger during a power surge.

[] Risk of electric shock. Do not touch uninsulated

portion of output connector or uninsulated battery terminal.

[] Save these instructions. Refer to them frequently and

use them to instruct others who may use this too!. If you loan someone this tool, loan them these instruc-

tions also to prevent misuse of the product and

possible injury.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities

contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure

to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust

masks that are specially designed to filter out microscopic particles.

Someofthefollowingsymbolsmaybeusedon thistoo!.Pleasestudythemandlearntheirmeaning.Proper

interpretationofthesesymbolswillallowyoutooperatethetoo!betterandsafer.

SYMBOL NAME DESIGNATION/EXPLANATmON

V Volts Voltage

A Amperes Current

Hz Hertz Frequency(cyclespersecond)

W Watt Power

min Minutes Time

Q, AlternatingCurrent Typeofcurrent

H_ DirectCurrent Typeora characteristicofcurrent

no NoLoadSpeed Rotationalspeed,at noload

ClassIIConstruction Doubleqnsulatedconstruction

.../rain Per Minute Revolutions, strokes, surface speed, orbits etc., per minute

Wet Conditions Alert Do not expose to rain or use in damp locations.

Read The Operator's Manual To reduce the risk of injury, user must read and understand

Eye Protection Always wear safety goggles or safety glasses with side

Safety Alert Precautions that involve your safety.

No Hands Symbol serious personal injury.

No Hands Symbol

operator's manual before using this product.

shields and a ful! face shield when operating this product.

Failure to keep your hands away from the blade will result in

Failure to keep your hands away from the blade will result inNo Hands Symbol serious personal injury.

Failure to keep your hands away from the blade will result in

serious personal injury.

No Hands Symbol Failure to keep your hands away from the blade will result in

serious personal injury.

Hot Surface

To reduce the risk of injury or damage, avoid contact with any hot surface.

+ 14 hidden pages