Craftsman 315114233 Owner’s Manual

Model No.

315.114233

®

WARNING: To reduce the risk of injury,
the user must read and understand the

operator's manual before using this
product.

Customer HeUpLine: 1-800-932-3188

Sears, Roebuck and Co., 3333 BeveHy Rd., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.comicraftsman

983000-650 Save this manuaJ for future reference

12-04

US

FULL ONE YEAR WARRANTY ON CRAFTSMAN TOOL
(f this CRAFTSMAN too! fa(Is to give complete sat(sfaction within one year from the date of purchase, RETURN (T TO

THE NEAREST SEARS STORE OR SEARS SERV(OE CENTER IN THE UN)TED STATES, and Sears w(l( replace (t,free
of charge.

(f th(s CRAFTSMAN too( (s used for commerc(al or rental purposes, th(s warranty applies for only 90 days from the date
of purchase.

Th(s warranty gives you specific lega( dghts, and you may also have other rights wh(ch vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Noffrnan Estates, (L 60179

This tool has many features for making its use more p(easant and enjoyable. Safety, performance, and dependability
have been given top prior(ty in the design of this product making it easy to maintain and operate.

_ WARNING!READANDUNDERSTANDALL

INSTRUCTIONS. Failure to follow all instructions
listed below, may result in electric shock, fire and/or

serious personal injury.

SAVE THESE mNSTRUCTmONS
WORK AREA

[] Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents.

[] Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable

liquids, gases, or dust. Power tools create sparks

which may ignite the dust or fumes.

[] Keep bystanders, children, and visitors away while

operating a power tool. Distractions can cause you to

lose control.

ELECTRmCAL SAFETY

[] A battery operated tool with integral batteries or a

separate battery pack must be recharged only with

the specified charger for the battery. A charger that

may be suitable for one type of battery may create a
risk of fire when used with another battery.

[] Use battery operated tool only with specifically

designated battery pack. Use of any other batteries
may create a risk of fire.

[] Use battery only with charger listed.

MODEL BATTERY PACK CHARGER

315.114233 130139020 140295004
Item no. 9 11378 Item no. 9 11379

[] Do not abuse the cord. Never use the cord to carry

the charger. Keep cord away from heat, oil, sharp

edges, or moving parts. Replace damaged cords
immediately. Damaged cords may create a fire.

PERSONAL SAFETY

[] Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use tool while tired or under the influence of

drugs, alcohol, or medication. A moment of inatten-
tion while operating power tools may result in serious

personal injury.

[] Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts.

[] Avoid accidental starting. Be sure switch is in the

locked or off position before inserting battery pack.
Carrying tools with your finger on the switch or insert-
ing the battery pack into a too! with the switch on

invites accidents.

[] Remove adjusting keys or wrenches before turning

the tool on. A wrench or a key that is left attached to a

rotating part of the tool may result in personal injury.

[] Do not overreach. Keep proper footing and balance

at all times. Proper footing and balance enable better
control of the too! in unexpected situations.

[] Use safety equipment. Always wear eye protection.

Dust mask, non-skid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.

[] Do not wear loose clothing or jewelry. Contain long

hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.

[] Do not use on a ladder or unstable support. Stable

footing on a solid surface enables better control of the
tool in unexpected situations.

TOOL USE AND CARE

[] Use clamps or other practical way to secure and

support the workpiece to a stable platform. Holding
the work by hand or against your body is unstable and

may lead to loss of control.

[] Do not force tool. Use the correct tool for your

application. The correct too! will do the job better and
safer at the rate for which it is designed.

[] Do not use tool if switch does not turn it on or off. A

tool that cannot be controlled with the switch is
dangerous and must be repaired.

[] Disconnect battery pack from tool or place the

switch in the locked or off position before making
any adjustments, changing accessories, or storing

the tool. Such preventive safety measures reduce the

risk of starting the tool accidentally.

[] Store idle tools out of reach of children and other

untrained persons. Tools are dangerous in the hands

of untrained users.

[] When battery pack is not in use, keep it away from

other metal objects like: paper clips, coins, keys,

nails, screws, or other small metal objects that can
make a connection from one terminal to another.

Shorting the battery terminals together may cause
sparks, burns, or a fire.

[] Maintain tooms with care. Keep cutting tools sharp

and clean. Properly maintained tools with sharp
cutting edges are less likely to bind and are easier to

control.

[] Check for misalignment or binding of moving parts,

breakage of parts, and any other condition that
may affect the tool's operation, if damaged, have

the tool serviced before using. Many accidents are
caused by poorly maintained tools.

[] Use only accessories that are recommended by the

manufacturer for your model. Accessories that may
be suitable for one too! may create a risk of injury when

used on another too!.

[] Keep the tool and its handle dry, clean and free

from oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleum-

based products, or any strong solvents to clean the

too!. Following this rule wil! reduce the risk of loss of
control and deterioration of the enclosure plastic.

SERVmCE

[] Tool service must be performed only by qualified

repair personnel. Service or maintenance performed
by unqualified personne! may result in a risk of injury.

[] When servicing a tool, use only identical replace-

ment parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow Maintenance hstructions may create a

risk of shock or injury.

[] DANGER! Keep hands away from cutting area and

blade. Keep your second hand on auxiliary handle
or motor housing. Hfboth hands are holding the saw,
they cannot be cut by the bJade.

[] Keep your body positioned to either side of the

saw blade, but not in line with the saw blade. KHCK-

BACK could cause the saw to jump backwards.

[] Do not reach underneath the work. The guard can=

not protect you from the blade be!ow the work.

[] Check the lower guard for proper closing before

each use. Do not operate saw if lower guard does
not move freely and close instantly. Never clamp or
tie the lower guard into the open position. Hfsaw is
accidentally dropped, lower guard may be bent. Raise
the lower guard with the retracting handle and make
sure it moves freely and does not touch the blade or
any other part, in all angles and depths of cut.

[] Check the operation and condition of the lower

guard spring. If the guard and the spring are not
operating properly, they must be serviced before
use. Lower guard may operate sluggishly due to dam=
aged parts, gummy deposits, or a buildup of debris.

[] Lower guard should be retracted manually only

for special cuts such as "Pocket Cuts" and "Com-
pound Cuts". Raise lower guard by Retracting

Handle. As soon as blade enters the material,
lower guard must be released. For aUother sawing,
the lower guard should operate automatically.

[] Always observe that the mower guard is cover-

ing the blade before placing saw down on bench
or floor. An unprotected, coasting blade wit! cause
the saw to watk backwards, cutting whatever is in its
path. Be aware of the time ittakes for the blade to
stop after switch is released.

[] NEVER hold piece being cut in your hands or

across your leg. It is important to support the work
properly to minimize body exposure, blade binding, or

loss of control.

[] Hold tool by insulating gripping surfaces when

performing an operation where the cutting tool
may contact hidden wiring. Contact with a "live"
wire wil! also make exposed metal parts of the tool
"live" and shock the operator.

[] When ripping always use a rip fence or an edge

guide. This improves the accuracy of cut and reduces

the chance of blade binding.

[] Always use blades with correct size and shape

(diamond vs. round) arbor holes. Blades that do not
match the mounting hardware of the saw wil! run ec=
centdcaliy, causing loss of control.

[] Never use damaged or incorrect blade washers

or bolts. The blade washers and bolt were specially
designed for the saw, for optimum performance and
safety of operation.

[] Causes and Operator Prevention of Kickback:

Kickback is a sudden reaction to a pinched, bound, or
misaligned saw blade, causing an uncontrolled saw to
lift up and out of the workpiece toward the operator.

When the blade is pinched or bound tightly by the kerf

closing down, the bJade stalls and the motor reaction
drives the unit rapidly back toward the operator.

If the blade becomes twisted or misaligned in the
cut, the teeth at the back edge of the blade can dig
into the top surface of the wood causing the blade

to climb out of the kerf and jump back toward the

operator.
Kickback is a result of tool misuse and!or incor-

rect operating procedures or conditions and can be
avoided by taking proper precautions as given below:

[] Maintain a firm grip on the saw and position your

body and arm ina way that allows you to resist
KICKBACK forces. KICKBACK forces can be con-

trolled by the operator, if proper precautions are taken.

[] When blade is binding, or when interrupting s

cut for any reason, release the trigger and hold

the saw motionless in the material until the blade

comes to a complete stop. Never attempt to re-
move the saw from the work or pull the saw back-

ward while the blade is in motion or KICKBACK
may occur. Investigate and take corrective actions to

eliminate the cause of blade binding.

[] When restarting a saw inthe workpiece, center the

saw blade in the kerf and check that teeth are not
engaged into the material. If saw blade is binding, it

may walk up or KICKBACK from the workpiece as the
saw is restarted.

Additional Specific Safety RuJes
[] Supportlargepanelsto minimizetheriskofblade

pinchingandKICKBACK.Largepanelstendtosag
undertheirownweight.Supportsmustbeplaced
underthepanelonbothsides,nearthelineofcutand
neartheedgeofthepanel.

[] Donotusedullordamagedblade.Unsharpenedor

improperlysetbladesproducenarrowkerfcausing
excessivefriction,bladebinding,andKICKBACK.

[] Bladedepthandbeveladjustinglockinglevers

mustbetight andsecurebeforemakingcut.[f
bladeadjustmentshiftswhilecutting,it wil! cause

binding and KICKBACK.

[] Use extra caution when making a "Pocket Out"

into existing walls or other blind areas. The pro-
truding blade may cut objects that can cause KICK-

BACK.

[] Hold tool by insulated gripping surfaces when

performing an operation where the cutting tool may
contact hidden wiring. Contact with a "live" wire will
also make exposed metal parts of the tool "live" and
shock the operator.

[] Know the power tool. Read operator's manual care-

fully. Learn its applications and limitations, as well
as the specific potential hazards related to this tool.

Following this rule will reduce the risk of electric shock,
fire, or serious injury.

[] Always wear safety glasses with side shields.

Everyday glasses have only impact resistant lenses.
They are NOT safety glasses. Following this rule wil!

reduce the risk of eye injury.

[] Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule wi[! reduce the

risk of serious personal injury.

[] Protect your hearing. Wear hearing protection dur-

ing extended periods of operation. Following this rule
wil! reduce the risk of serious personal injury.

[] Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using the battery tool or when changing
accessories. Fo!lowing this rule will reduce the risk of
electric shock, fire, or serious personal injury.

[] Do not place battery tools or their batteries near

fire or heat. This wi[! reduce the risk of explosion and

possibly injury.

[] Never use a battery that has been dropped or

received a sharp blow. A damaged battery [s subject
to explosion. Properly dispose of a dropped or dam=
aged battery immediately.

[] Batteries vent hydrogen gas and can explode in

the presence of a source of ignition, such as a pilot

light. To reduce the risk of serious persona! injury,

never use any cordless product in the presence of
open flame. An exploded battery can propel debris and
chemicals. [f exposed, flush with water immediately.

[] Do not charge battery tool in a damp or wet

location. Following this rule will reduce the risk of
electric shock.

[] For best results, the battery tool should be charged

in a location where the temperature is more than
50°P but less than 100°P. Do not store outside or in

vehicles.

[] Under extreme usage or temperature condi-

tions, battery leakage may occur. [f liquid comes

in contact with your skin, wash immediately with
soap and water, then neutralize with lemon juice
or vinegar. [f liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek

immediate medical attention. Following this rule wi[!

reduce the risk of serious personal injury.

Laser Guide Warnings:

The laser guide radiation used in the Craftsman trim saw
is Class [[ with maximum <1 mW and 650nm wavelengths.

These lasers do not normally present an optical hazard
although staring at the beam may cause flash blindness.

[] Avoid direct eye exposure when using the laser guide.
[] The laser shall be used and maintained in accordance

with the manufacturer's instructions.

[] Never aim the beam at a person or object other than the

workpiece.

[] Always ensure the laser beam is aimed at a sturdy

workpiece without reflective surfaces. Shiny reflective
sheet metal or similar shiny materials are not suitable for

laser use.

[] All repairs should be made by an authorized service

representative or the laser manufacturer.

_ WARNING!READANDUNDERSTANDALL

[NSTRUOT[ONSo Failure to follow all instructions
listed below, may result in electric shock, fire

and/or serious personal injury.

[] Before using battery charger, read all instructions

and cautionary markings inthis manual, on battery
charger, battery, and product using battery to prevent

misuse of the products and possible injury or damage.

CAUTION: To reduce the risk of electric shock or

damage to the charger and battery, charge only
nickeFcadmium rechargeabie batteries as specifi=
cally designated on the charger. Other types of
batteries may burst, causing personal injuryor
damage.

[] Do not use charger outdoors or expose to wet or

damp conditions. Water entering charger wil! increase
the risk of electric shock.

[] Use of an attachment not recommended or sold

by the battery charger manufacturer may result in

a risk of fire, electric shock, or injury to persons.

Following this rule will reduce the risk of electric shock,

fire, or serious personal injury.

[] Do not abuse cord or charger. Never use the cord to

carry the charger. Do not pull the charger cord rather
than the plug when disconnecting from receptacle.

Damage to the cord or charger could occur and create

an electric shock hazard. Replace damaged cords ira=

mediately.

[] Make sure cord is located so that it wi[[ not be

stepped on, tripped over, come in contact with
sharp edges or moving parts or otherwise subject-
ed to damage or stress. This wil! reduce the risk of
accidental falls, which could cause injury, and damage

to the cord, which could result in electric shock.

[] Keep cord and charger from heat to prevent

damage to housing or internal parts.

[] Do not let gasoline, oils, petroleum=based products,

etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken, or destroy plastic.

[] An extension cord should not be used unless

absolutely necessary. Use of improper extension cord

could result in a risk of fire and electric shock. If
extension cord must be used, make sure:

a. That pins on plug of extension cord are the

same number, size and shape as those of
plug on charger.

b. That extension cord is properly wired and in

good electrical condition; and

c. That wire size is large enough for AC ampere

rating of charger as specified below:

Cord Length (Feet) 25' 50' 100'
Cord Size (AWG) 16 16 16
NOTE: AWG = American Wire Gauge

[] Do not operate charger with a damaged cord or

plug, which could cause shorting and electric shock. If
damaged, have the charger replaced by an authorized

serviceman.

[] Do not operate charger if it has received a sharp

blow, been dropped, or otherwise damaged in any
way. Take it to an authorized serviceman for electrical
check to determine if the charger is in good working

order.

[] Do not disassemble charger. Take it to an authorized

serviceman when service or repair is required. Incor-

rect reassembly may result in a risk of electric shock or
fire.

[] Unplug charger from outlet before attempting any

maintenance or cleaning to reduce the risk of
electric shock.

[] Disconnect charger from the power supply when

not in use. This will reduce the risk of electric shock
or damage to the charger if metal items should fall into

the opening. It also wil! help prevent damage to the
charger during a power surge.

[] Risk of electric shock. Do not touch uninsu[ated

portion of output connector or uninsulated battery
terminal.

[] Save these instructions. Refer to them frequently and

use them to instruct others who may use this tool. If
you loan someone this tool, loan them these instruc-
tions also to prevent misuse of the product and

possible injury.

_t_ WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities

contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:

lead from lead=based paints,
crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically=treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure

to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust

masks that are specially designed to filter out microscopic particles.

Someofthe followingsymbolsmaybe usedonthistool. Pleasestudythemandlearntheirmeaning.Proper

interpretationofthesesymbolswillallowyoutooperatethetoo!betterandsafer.

SYMBOL NAME DESIGNATION/EXPLANATmON

V Volts

A Amperes

Hz Hertz

W Watt

min Minutes

'_ Alternating Current

H_ Direct Current

no No Load Speed

Class II Construction

.../min Per Minute

Wet Conditions Alert

Voltage

Current

Frequency (cycles per second)

Power

Time

Type of current

Type or a characteristic of current

Rotational speed, at no load

Doubleqnsulated construction

Revolutions, strokes, surface speed, orbits etc,, per minute

Do not expose to rain or use in damp locations.

®

Read The Operator's Manual

Eye Protection

Safety Alert

No Hands Symbol

No Hands

No Hands Symbol

No Hands Symbol

Hot Surface

Symbol

To reduce the risk of injury, user must read and understand
operator's manual before using this product.

Always wear safety goggles or safety glasses with side
shields and a ful! face shield when operating this product.

Precautions that involve your safety.

Failure to keep your hands away from the blade will result in

serious personal injury.

Failure to keep your hands away from the blade will result in

serious personal injury.

Failure to keep your hands away from the blade will result in

serious personal injury.

Failure to keep your hands away from the blade will result in

serious personal injury.

To reduce the risk of injury or damage, avoid contact with
any hot surface.

Thefollowingsignalwordsandmeaningsareintendedtoexplainthelevelsofriskassociatedwiththisproduct.
SYMBOL SIGNAL MEANING

DANGER: hdicates an imminently hazardous situation, which, if not avoided, will

result in death or serious injury.

WARNING: hdicates a potentially hazardous situation, which, if not avoided, could

result in death or serious injury.

CAUTmON: hdicates a potentially hazardous situation, which, if not avoided, may

result in minor or moderate injury.

CAUTmON: (Without Safety Alert Symbol) hdicates a situation that may result in

property damage.

SERVICE

Servicing requires extreme care and knowledge and
should be performed only by a qualified service tech-
nician. For service we suggest you return the product to
your nearest AUTHORIZED SERWOE CENTER for
repair. When servicing, use only identical replacement
parts.

WARNING:

The operation of any power too! can result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power tool operation, always wear safety

goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side

shields. Always use eye protection which is marked to comply with ANSI Z87.1.

SAVE THESE INSTRUCTIONS

WARNING: To avoid serious personal injury,
do not attempt to use this product until you read
thoroughly and understand completely the
operator's manual. Save this operator's manual
and review frequently for continuing safe opera-
tion and instructing others who may use this

product.