Craftsman 315.113913 User Manual

OPERATOR'S MANUAL

19.2 VOLT WORKLIGHT

Model No.

315.113913

BATTERIES AND CHARGERS

SOLD SEPARATELY

A WARNING: To reduce the risk

of injury, the user must read and
understand the operator’s manual
before using this product.

Customer Help Line: 1-800-932-3188

Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA

Visit the Craftsman web page: www.sears.com/craftsman

983000-712
9-3-08 (REV:05)

Save this manual for future reference

ciVLJus

TABLE OF CONTENTS

Warranty.....................................................................................................................................................................................2

Introduction................................................................................................................................................................................2

General Safety Rules..............................................................................................................................................................3-4

Symbols......................................................................................................................................................................................5

Operation....................................................................................................................................................................................6

Maintenance...............................................................................................................................................................................7

Parts Ordering/Service................................................................................................................................................Back Page

WARRANTY

ONE-YEAR FULL WARRANTY ON CRAFTSMAN TOOL

If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN IT TO ANY

SEARS STORE OR OTHER CRAFTSMAN OUTLET IN THE UNITED STATES FOR FREE REPLACEMENT.

If this Craftsman tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of
purchase.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

INTRODUCTION

This worklight has many features for making its use more pleasant and enjoyable. Safety, performance, and
dependability have been given top priority in the design of this product making it easy to maintain and operate.

GENERAL SAFETY RULES

IMPORTANT SAFETY INSTRUCTIONS

A WARNING! READ AND UNDERSTAND

ALL INSTRUCTIONS. Failure to follow

all instruotions listed below, may result in
eleotrio shook, fire and/or serious personal
injury.

A WARNING! When using eleotrio

applianoes, basio preoautions should
always be followed, inoluding the following:

A WARNING: The lens gets very hot dur

ing use. To reduce the risk of burns, do not
touch a hot lens.

■ Read all the instructions before using the appliance.

■ To reduce the risk of injury, close supervision is

necessary when an appliance is used near children.

■ Do not use outdoors.

■ To reduce the risk of electrical shock, do not put

flashlight or charger in water or other liquid. Do not

place or store appliance where it can fall or be pulled

into a tub or sink,

■ Use only the charger supplied by the manufacturer

to recharge.

■ Use only recommended battery pack. Any attempt

to use another battery pack will cause damage to your
worklight and could possibly explode, cause a fire, or

personal injury.

MODEL

315.113913

BATTERY PACK

(Li-ion)

315.113710

(130156001)

315.113740

(130285003)
(130285006)

BATTERY PACK

(Ni-Cd)

130279003,

130279005

(Item N0.211375)

CHARGER

(Multi-Chemistry)

315.259260

(140351001)

315.259260
(140351001)

1425301 (211041)

315.115730

(140301003)

140107001

Remove battery pack from worklight before replac
ing bulb or performing any routine maintenance or
cleaning. Replace bulb with same type rated 19.2 V,

0.6 Amp.

Do not disassemble the worklight.
Do not place worklight or battery pack near fire or

heat. They may explode. Also, do not dispose of a

worn out battery pack by incinerating. Do not inciner
ate the battery, even if it is severely damaged or com
pletely worn out. The battery may explode in fire.

Do not operate worklight or charger near flamma
ble liquids or in gaseous or explosive atmospheres.

Internal sparks may ignite fumes.

Do not store your worklight in a damp or wet ioca-

tion. Do not store in locations where the tempera
ture is less than 50°F or more than 100°F. Do not

store in outside sheds or in vehicles.

Do not permit children to use worklight unsuper

vised. It is not a toy. The temperature of the bulb will

become hot after being on for only a short period of
time. This hot temperature can cause burn injury if
touched and can create sufficient heat to melt some
fabrics.

If wrapped or in contact with fabrics, the worklight

lens can produce sufficient heat to melt some fab

rics. To avoid serious personal injury, never allow the

worklight lens to come in contact with anything.

Keep light dry, clean, and free from oil and grease.

Always use a clean cloth when cleaning. Never use

brake fluids, gasoline, petroleum-based products, or
any strong solvent to clean the worklight.

Don’t expose worklight to rain. Water entering a

power tool will increase the risk of electric shock or

malfunction.

GENERAL SAFETY RULES

■ Do not overreach. Keep proper footing and balance

at all times. Proper footing and balance enable better

control of the worklight in unexpected situations. Do

not use on a ladder or unstable support.

WORKLIGHT USE AND CARE

■ This product is for household use only.

■ Store worklight out of the reach of children and

other untrained persons. Worklights are dangerous in

the hands of untrained users.

■ Let worklight cool for several minutes after use

before changing the bulb.

■ Do not use or permit use of worklight in bed or

sleeping bags. This worklight lens can melt fabric and

a burn injury could result.

SAFETY RULES FOR BATTERY WORKLIGHTS

■ Under extreme usage or temperature conditions,

battery leakage may occur. If liquid comes in contact

with your skin, wash immediately with soap and water,
then neutralize with lemon juice or vinegar. If liquid gets

in your eyes, flush them with clean water for at least 10
minutes, then seek immediate medical attention.

Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery
can propel debris and chemicals. If exposed, flush with
water immediately.

Do not crush, drop or damage battery pack. Do
not use a battery pack or charger that has been
dropped or received a sharp blow. A damaged

battery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately. Failure to
heed this warning can result in serious personal injury.

If the power supply cord is damaged, it must be

replaced only by the manufacturer or by an authorized
service center to avoid risk.

Save these instructions. Refer to them frequently and

use them to instruct others who may use this power
tool. If you loan someone this power tool, loan them
these instructions also.

SYMBOLS

Some of the following symbols may be used on this worklight. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the worklight better and safer.

SYMBOL NAME DESIGNATION/EXPLANATION

V

A

min

-Ay

—

no

m

,,,/min

A

Volts Voltage
Amperes
Minutes Time
Alternating Current
Direct Current

No Load Speed Rotational speed, at no load

Class II Construction
Per Minute Revolutions, strokes, surface speed, orbits etc,, per minute

Wet Conditions Alert Do not expose to rain or use in damp locations.

Read The Operator’s Manual

Safety Alert

Hot Surfaces

Current

Type of current
Type or a characteristic of current

Double-insulated construction

To reduce the risk of injury, user must read and understand operator’s
manual before using this product.

Precautions that involve your safety.

To reduce the risk of injury or damage, avoid contact with any hot
surface.

The following signal words and meanings are intended to explain the levels of risk associated with this product,

SYMBOL SIGNAL MEANING

Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.

Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury.

(Without Safety Alert Symbol) Indicates a situation that may result in property damage.

A
A
A

DANGER:

WARNING:

CAUTION

CAUTION

A WARNING: To avoid serious personal injury, do not attempt to use this produot until you read

thoroughly and understand oompletely the Operator’s Manual. If you do not understand the
warnings and instruotions in the Operator’s Manual, do not use this produot. Call Customer
Servioe for assistanoe.

SAVE THESE INSTRUCTIONS

OPERATIO

WARNING: The safe use of this product
requires an understanding of the information
on the tool and in this operator’s manual.
Before use of this product, familiarize
yourself with all operating features and
safety rules.

CAUTION: When placing the battery pack in the

tool, be sure raised rib on battery pack aligns with
the groove in the tool and that the latches snap into
place properly. Improper assembly of the battery
pack can cause damage to internal components.

ROTATE HEAD TO THE

DESIRED POSITION

MULTI-POSITION

HEAD

SWITCH

TRIGGER

LATCHES

DEPRESS LATCHES TO

RELEASE BATTERY PACK

ALIGN RAISED RIBS WITH GROOVE INSIDE WORKLIGHT BASE;

SLIDE TOGETHER UNTIL LATCHES CLICK.

Fig. 1

BATTERY PROTECTION FEATURES

DieHard® 19.2 V lithium-ion battery packs are designed
with features that protect the lithium-ion cells and
maximize battery life.

If the tool stops during use, release the trigger to reset
and resume operation. If the tool still does not work, the
battery needs to be recharged.

Fig. 2

DEPRESS BUTTON

MAINTENANCE

BULB REPLACEMENT

Replace the bulb with the same type rated

19.2 V, 0.6 Amp.

Always ask for replacement bulb number 7811502.

TABS

PULL COOLED BULB FROM SPRING; PUSH NEW BULB INTO

SPRING. TO REPLACE LENS COVER, ALIGN TABS INSIDE LENS

COVER WITH SLOTS ON HOUSING; SNAP INTO PLACE.

BUTTON BULB

Fig. 4

BATTERIES

This product will accept DIeHard® 19.2 V llthlum-lon bat
tery packs and Craftsman 19.2 V nickel-cadmium battery
packs.

The batteries for this product have been designed
to provide maximum trouble-free life. However, like
all batteries, they will eventually wear out. Do not
disassemble battery pack and attempt to replace the
batteries. Handling of these batteries, especially when
wearing rings and jewelry, could result In a serious burn.

To obtain the longest possible battery life, we suggest the
following:

For lithium-ion batteries:

■ Remove the battery pack from the charger once It Is
fully charged and ready for use.

For battery pack storage longer than 30 days:

■ Store the battery pack where the temperature Is below
80°F and away from moisture.

■ Store battery packs In a 30%-50% charged condition.

■ Every six months of storage, charge the pack as

normal.

For nickel-cadmium batteries:

■ Remove the battery pack from the charger once It Is
fully charged and ready for use.

For battery pack storage longer than 30 days:

■ Store the battery pack where the temperature Is below
80°F.

■ Store battery packs In a “discharged” condition.

BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING

To preserve natural resources, please

recycle or dispose of batteries
properly.

This product uses nickel-cadmium
and llthlum-lon batteries. Local, state
or federal laws may prohibit disposal
of batteries In ordinary trash.

Consult your local waste authority
for Information regarding available

recycling and/or disposal options.

WARNING: Upon removal, ooverthe

battery paok’s terminals with heavy-duty
adhesive tape. Do not attempt to destroy
or disassemble battery paok or remove any
of its oomponents. Lithium-ion and niokel­oadmium batteries must be reoyoled or
disposed of properly. Also, never touoh both
terminals with metal objeots and/or body

parts as short oirouit may result. Keep away
from ohildren. Failure to oomply with these
warnings oould result in fire and/or serious

injury.

Get it fixed, at your home or ours!

Your Home

For expert troubleshooting and home solutions advice:

.............

www.managemyhome.com

■"IjJft.

For repair - in your home - of all major brand appliances,

lawn and garden equipment, or heating and cooling systems,

no matter who made it, no matter who sold it!

For the replacement parts, accessories and

owner’s manuals that you need to do-it-yourself.

For Sears professional installation of home appliances

and items like garage door openers and water heaters.

1-800-4-MY-HOME®

Call anytime, day or night (U.S.A. and Canada)

www.sears.comwww.sears.ca

Our Home

(i -8oo -

469-4663

)

For repair of carry-in items like vacuums, lawn equipment,

and electronics, call anytime for the location of your nearest

Sears Parts & Repair Service Center

1 -800-488-1222 (USA) 1 -800-469-4663 (Canada)

www.sears.com www.sears.ca

To purchase a protection agreement on a product serviced by Sears:

1 -800-827-6655 (USA) 1 -800-361 -6665 (Canada)

Para pedir servicio de reparación

a domicilio, y para ordenar piezas:

1-888-SU-HOGAR®

(1-888-784-6427)

® Registered Trademark / ™ Trademark / ™ Service Mark of Sears Brands, LLC

® Marca Registrada / ™ Marca de Fábrica / ™ Marca de Servicio de Sears Brands, LLC

Marque de commerce / Marque déposée de Sears Brands, LLC © Sears Brands, LLC

Au Canada pour service en français:

1-800-LE-FOYER“''

(1-800-533-6937)

www.sears.ca