Craftsman 172.797740 Operator's Manual

Operator’s Manual

CAUTION: Read, understand and follow all

Safety Rules and Operating Instructions in this
Manual before using this product.

• WARRANTY

• SAFETY

• ASSEMBLY

• OPERATION

• MAINTENANCE

• PARTS LIST

• ESPAÑOL

20-in. 4.2 Amp

Electric
Hedge Trimmer

Model No. 172.797740

final Eng.
11-13

TABLE OF CONTENTS

2

SAVE THESE INSTRUCTIONS!
READ ALL INSTRUCTIONS!

3026035

WARNING:

Some dust particles created by lawn and garden tools
contain chemicals known to the state of California to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:

!

• Compounds in fertilizers, herbicides, pesticides, and insecticides.

• Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending upon how often you do this
type of work. To reduce your exposure to these chemicals:

• Work in a well-ventilated area

• Work with approved safety equipment, such as those dust masks
that are specially designed to filter out microscopic particles.

Warranty……………………………..........................................……………..Page 2

Safety Symbols……………………..........................................……………..Page 3

Safety Instructions……………………..........................................……….....Pages 4 - 9

Unpacking..……………………………...........................………………….....Page 9

Description/Specifications………………………………...............................Pages 10 - 11

Assembly............................………………………………..............................Page 12

Operation...................………………………..........................................…...Pages 13 - 15

Maintenance/ Trouble Shooting..........………...............................………....Pages 16 - 17

Parts Lists.......……………………..........................................……………....Pages 18 - 19

3

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible
dangers. The safety symbols and the explanations with them deserve your
careful attention and understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and warnings they give
are no substitutes for proper accident prevention measures.

WARNING: Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as “DANGER,”
“WARNING,” and “CAUTION” before using this rotary tool. Failure to follow
all instructions listed in this manual may result in electric shock, fire and/or
serious personal injury.

SYMBOL SIGNAL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR
CAUTION. May be used in conjunction with other symbols or pictographs.

DANGER: Indicates a hazardous situation which, if not avoided, will
result in death or serious injury. This signal word is to be limited to the most
extreme situations. Always follow the safety precautions to reduce the risk of
fire, electric shock, and personal injury.

WARNING: Indicates a hazardous situation which, if not avoided, could
result in death or serious injury. Always follow the safety precautions to
reduce the risk of fire, electric shock, and personal injury.

CAUTION: Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.

Damage Prevention and Information Messages

These inform the user of important information and/or instructions that could
lead to equipment or other property damage if they are not followed. Each
message is preceded by the word “NOTE,” as in the example below:

NOTE: Equipment and/or property damage may result if these instructions
are not followed.

WARNING: To ensure safety and reliability, all repairs
should be performed by a qualified service technician.

WARNING: The operation of any power tools can
result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning
power tool operation, always wear safety goggles or
safety glasses with side shield and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over eyeglasses or standard
safety glasses with side shields. Always use eye protection which is marked
to comply with ANSI Z87.1 shields.

CRAFTSMAN LIMITED WARRANTY

FOR TWO YEARS from the date of sale, this product is warranted against defects in material
or workmanship.

WITH PROOF OF SALE, a defective product will be replaced free of charge.
For warranty coverage details to obtain free replacement,

visit the web page: www.craftsman.com/warranty
This warranty does not cover the cutting blades, which are expendable parts that can wear

out from normal use within the warranty period.
This warranty is void if this product is ever used while providing commercial services or if

rented to another person.
This warranty gives you specific legal rights, and you may also have other rights which vary

from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

4

SAFETY INSTRUCTIONS

WARNING:

If correctly used, this electric Hedge Trimmer is an efficient
tool to use; if used improperly or without the due precautions it could become a
dangerous tool. For pleasant and safe work, ALWAYS strictly comply with the safety
rules that are contained in this manual.

!

WARNING:

BE SURE to read and understand all instructions in this manual
before using this electric Hedge Trimmer. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious personal injury.

!

WARNING:

To avoid mistakes that could cause serious injury, DO NOT
connect the Hedge Trimmer to the power source until the following instructions
have been read and understood.

!

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

The term power tool in the warnings refers to your electric (corded) power tool or battery-operated
(cordless) power tool.

WORK AREA SAFETY

• Avoid Dangerous Environment - Don't use appliances in damp or wet locations.

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

• Keep children and bystanders away while operating a power tool. Distractions can cause

you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching

outlets will reduce risk of electric shock.

• Avoid body contact with grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is grounded.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase

the risk of electric shock.

• Do Not Abuse Cord - Never carry appliance by cord or yank it to disconnect from receptacle.
Keep cord from heat, oil, and sharp edges.
Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

• Operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING:

Read all safety warnings and instructions. Failure to follow the

warnings and instructions may result in electric shock, fire and/or serious injur y.

!

SAFETY INSTRUCTIONS cont.

Safety Helmet
Protection

Eye
Protection

Heavy Duty
Gloves

Hearing
Protection

Safety Shoes

Safety Chaps

Snug Fitting
Clothing

• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while

operating power tools may result in serious personal injury.

• Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with

your finger on the switch or energizing power tools that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool on. A wrench or
a key left attached to a rotating part of the power tool may result in personal injury.

• Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce

dust-related hazards.

PERSONAL SAFETY

• Don't grasp the exposed cutting blades or cutting edges when picking up or holding
the appliance or power tool.

• Don't Force Appliance/Power Tool - It will do the job better and with less likelihood of a
risk of injury at the rate for which it was designed.

• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tools operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.

• Maintain Appliance With Care - Keep cutting edge sharp and clean for best performance and to

reduce the risk of injury. Follow instructions for lubricating and changing accessories.
Inspect appliance cord periodically, and if damaged, have it repaired by an authorized service facility.
Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free
from oil and grease.

• Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations

different from those intended could result in a hazardous situation.

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.

POWER TOOL USE AND CARE SAFETY

SERVICE

• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.

5