Craftsman 151.30383 Operator's Manual
OPERATOR′S MANUAL
MANUAL DEL USUARIO
Model No.
151.30383
Modelo n
0
151.30383
Sears Brands Management Corporation, Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.craftsman.com
Visite el sitio Web de Craftsman: www.craftsman.com
Save this manual for future reference
Conserve este manual para futura referencia.
ORILLADORA ELÉCTRICA
de 15 pulgadas 5.5A
15-Inch 5.5A ELECTRIC
LINE TRIMMER
WARNING:
To reduce the
risk of injury, the user must read and
understand the operator's manual
before using this product.
ADVERTENCIA:
Para reducir
el riesgo de lesiones, el usuario debe
leer y comprender el manual antes de
utilizar este producto.
2 ― English
TABLE OF CONTENTS / TABLA DE CONTENIDOS
ENGLISH
INTRODUCTION / INTRODUCCIÓN
This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and
dependability have been given top priority in the design of this product making it easy to maintain and operate.
* * *
Esta herramienta tiene muchas funciones para hacerla más agradable y cómoda de usar. Se ha dado máxima
prioridad a la seguridad, rendimiento y confiabilidad en las etapas de diseño de este producto para que sea fácil
de utilizar y mantener.
■ Warranty ...................................................................2
■ Introduction ...............................................................2
■ Important safety instructions .................................3-4
■ Symbols .................................................................5-6
■ Features ................................................................... 7
■ Electrical information ................................................ 8
■ Assembly .................................................................. 9
■ Operation ................................................................10
■ Care and maintenance ........................................... 11
■ Troubleshooting ......................................................12
■ Illustrated parts list ............................................13-14
■ Garantía ..............................Sección de Inglés pág. 2
■ Introducción .........................Sección de Inglés pág. 2
■ Importantes instrucciones de seguridad ................3-4
■ Símbolos ...............................................................5-6
■ Características .........................................................7
■ Información eléctrica ................................................ 8
■ Armado ..................................................................... 9
■ Funcionamiento ......................................................10
■ Cuidado y mantenimiento ....................................... 11
■ Resolución de problemas .......................................12
■ Lista de piezas, ilustrada ...................................13-14
■ Figura numeras (ilustraciones) .............................. i-iv
SPANISH
CRAFTSMAN LIMITED WARRANTY
FOR 2 YEARS from the date of sale, this product is warranted against defects in material or workmanship.
WITH PROOF OF SALE, a defective product will be replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web page: www.craftsman.com/warranty
This warranty does not cover the spool of trimmer line or trimmer head spool cover, which are expendable parts
that can wear out from normal use within the warranty period.
This warranty is void if this product is ever used while providing commercial services or if rented to another
person.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
* * *
GARANTÍA LIMITADA CRAFTSMAN
DURANTE 2 AÑOS a contar de la fecha de venta, este producto está garantizado contra defectos en sus
materiales o fabricación.
Un producto defectuoso puede reemplazarse por uno nuevo, de manera gratuita, considerando que se presente
una PRUEBA DE VENTA.
Para conocer la cobertura de la garantía y obtener un reemplazo gratuito, visite el sitio Web www.craftsman.com/
warranty
Esta garantía no cubre el carrete del hilo de la orilladora ni la tapa del cabezal del carrete, las cuales son piezas
desechables que pueden desgastarse debido al uso normal dentro del periodo de garantía.
La garantía de un año se anula si el producto se usa para proporcionar servicios comerciales o si se le arrienda a
otra persona.
Esta garantía le entrega derechos legales específicos que pueden variar según su estado (podría tener otros
derechos adicionales).
Sears Brands Management Corporation, Hoffman Estates, IL 60179
3 ― English
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
■ This line trimmer is designed for cutting grass and
similar soft vegetation and for trimming grass edges
in private and hobby garden areas which are not
accessible with a line trimmer.
■ The device is not allowed to be used in public
gardens, parks, sports centers or at roadsides as well
as in agriculture and forestry.
■ This line trimmer is not allowed to be used for cutting
or chopping, otherwise, there is a risk of injury:
- Hedges, shrubs and bushes,
- Flowers,
- In terms of composting.
■ This line trimmer is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
■ Children should be supervised to ensure that they do
not play with the appliance.
■ If the supply cord is damaged, stop using the unit.
Take the unit to a qualifi ed service dealer for inspection
and possible repair using identical replacement parts.
■ Wear protective glasses or goggles.
■ Never allow children or people unfamiliar with the
instructions to use the line trimmer.
■ Stop using the line trimmer while people, especially
children, or pets are nearby.
■ Only use the line trimmer in daylight or good artifi cial
light.
■ Before using the line trimmer and after any impact,
check for signs of wear or damage and repair as
necessary.
■ Never operate the line trimmer with damaged guards
or without the guards in place.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT!
When using electric
gardening appliance, basic safety precautions should
always be followed to reduce the risk of fi re, electric
shock and personal injury. For your own safety and
bystanders please read these instructions before
operating the line trimmer. Do not use the line trimmer
without reading the instruction sheet. Please keep the
instructions safe for later use.
■ Keep hands and feet away from the cutting means at
all times and especially when switching on the motor.
■ Take care against injury from any device fi tted for
trimming the fi lament line length. After extending new
cutter line always return the line trimmer to its normal
operating position before switching on.
■ Never fi t metal cutting elements.
■ Never use replacement parts or accessories not
provided or recommended by the manufacturer.
See the Parts List in this manual for identical
replacement parts.
■ Disconnect the line trimmer from the power supply
before checking, cleaning or working on the line
trimmer and when it is not in use.
■ Always ensure that ventilation openings are kept
clear of debris.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR
LINE TRIMMER
■ Do not expose to moisture.
■ Use only on AC mains supply voltage shown on the
product rating label.
■ Avoid operating your trimmer in wet grass, where
feasible.
■ Take care in wet grass, you may lose your footing.
■ On slopes, be extra careful of your footing and wear
nonslip footwear.
■ Do not walk backwards when trimming, you could
trip. Walk never run.
■ Switch off before pushing the trimmer over surfaces
other than grass.
■ Never pick up or carry a trimmer by the cable.
■ Do not lean over the trimmer guard. Objects may be
thrown by the cutting line.
■ Keep all nuts, bolts and screws tight to be sure the
trimmer is in safe working condition.
■ To avoid the risk of injury, keep fi ngers and hands
clear of the line cut-off blade on the leading edge of the
guard.
■ Don't Force Appliance - It will do the job better and
with less likelihood of a risk of injury at the rate for
which it was designed; Don't Overreach - Keep proper
footing and balance at all times; Stay Alert - Watch
what you are doing. Use common sense. Do not
operate appliance when you are tired.
4 ― English
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
MAINTENANCE
■ After use, disconnect the machine from the mains
and check for damage.
■ When not in use store the machine out of the reach
of children.
■ Electric powered trimmers should only be repaired by
a qualifi ed service dealer using identical replacement
parts.
■ Use only identical replacement parts as listed in the
Parts List of this manual.
The preparation for use, operation and maintenance of
the appliance:
- Read the instructions carefully;
- Be familiar with the controls and proper use of the
equipment;
- Before use check the supply and extension cord for
signs of damage or ageing;
- If the cord becomes damaged during use, disconnect
the cord from the power supply immediately:
DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY.
- Do not use the lawn trimmer (edge trimmer), if the
cords are damaged or worn.
WARNING!
- Cutting elements continue to rotate after the motor is
switched off;
- Keep extension cords away from cutting elements;
- It is recommended that appliances should be supplied
via a residual current device (RCD) with a tripping
current of not more than 30mA.
5 ― English
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
Class II Construction Double-insulated construction
Safety Alert Symbol Indicates a potential personal injury hazard.
Read The Operator’s Manual
To reduce the risk of injury user must read and understand
operator’s manual before using this product.
Eye and Hearing Protection
Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing protection.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
Gloves
Wear non-slip, heavy-duty protective gloves when handling
the hedge trimmer and the blade.
Safety Footwear Wear non-slip safety footwear when using this equipment.
Electric Shock
Failure to use in dry conditions and to observe safe
practices can result in electric shock.
Long Hair
Failure to keep long hair away from the air inlet could result
in personal injury.
Loose Clothing
Failure to keep loose clothing from being drawn into air
intake could result in personal injury.
6 ― English
SYMBOLS
SYMBOL SIGNAL MEANING
DANGER
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result
in minor or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
WARNING
To avoid serious personal injury, do not attempt to use this product until you
read thoroughly and understand completely the operator’s manual. If you
do not understand the warnings and instructions in the operator’s manual,
do not use this product. Call the Customer Care Hot Line for assistance at
1-888-331-4569.
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and, when needed, a full face shield. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
The following signal words and meanings are intended to explain the levels of risk associated with this
product.
7 ― English
FEATURES
PRODUCT SPECIFICATIONS
Voltage.................................................................................................................................................. 120V~ 60Hz
Current.........................................................................................................................................................5.5 AMP
Revolutions Per Minute ............................................................................................................................. 7300 rpm
Line Diameter ......................................................................................................................... 0.065 inch (1.65 mm)
Feed System ........................................................................................................................... Dual Line Auto Feed
Cutting Width ................................................................................................................................................ 15 inch
Weight .......................................................................................................................................... 6.06 lbs (2.75 kg)
KNOW YOUR LINE TRIMMER
See Figure 1.
The safe use of this product requires an understanding
of the information on the product and in this operator’s
manual as well as a knowledge of the project you
are attempting. Before use of this product, familiarize
yourself with all operating features and safety rules.
CORD RETAINER
A convenient cord retainer helps keep the extension
cord connection secure during line trimmer operation.
PIVOTING HEAD
Allows user to choose from 7 positions to maximize
trimming or edging effectiveness.
AUXILIARY HANDLE
The line trimmer is equipped with an auxiliary front
handle for ease of operation and to prevent loss of
control.
ROTATING MAIN HANDLE
The main handle on the trimmer can be rotated and
locked into place for ease of use when edging.
TELESCOPING SHAFT
The line trimmer can be adjusted to different lengths to
accommodate the user's height and comfort.
EDGING WHEELS
Dual all terrain edging wheels provide more stability
while performing edging tasks.
8 ― English
ELECTRICAL INFORMATION
DOUBLE INSULATION
See Figure 2.
The line trimmer is double insulated to provide a
double thickness of insulation between you and the
tool’s electrical system. All exposed metal parts are
isolated from the internal metal motor components with
protective insulation.
WARNING!
To avoid electrical hazards,
fi re hazards, or damage to the tool, use proper circuit
protection. Your line trimmer is wired at the factory for
120 v operation. Connect to a 120 v, 15 a circuit, and
use a 15 a time-delayed fuse or circuit breaker. To
avoid shock or fi re, if the extension cord is worn, cut or
damaged in any way, replace it immediately.
WARNING!
■ ALTHOUGH THIS TOOL IS DOUBLE INSULATED,
THE EXTENSION CORD AND RECEPTACLE MUST
STILL BE GROUNDED WHILE IN USE TO PROTECT
THE OPERATOR FROM ELECTRICAL SHOCK.
■ DOUBLE INSULATION DOES NOT TAKE THE
PLACE OF NORMAL SAFETY PRECAUTIONS WHEN
OPERATING THIS LINE TRIMMER.
WARNING!
TO AVOID ELECTROCUTION:
■ Use only identical replacement parts when servicing
a tool with double insulation. Servicing should be
performed by a qualifi ed technician.
■ Do not use in wet or damp areas or expose to rain.
WARNING!
ALTHOUGH THIS LINE
TRIMMER IS DOUBLE INSULATED, THE
EXTENSION CORD AND RECEPTACLE MUST STILL
BE GROUNDED WHILE IN USE TO PROTECT THE
OPERATOR FROM ELECTRICAL SHOCK.
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION OR
BREAKDOWN, grounding provides the path of least
resistance for electric current, and reduces the risk of
electric shock. This tool is equipped with a POLARIZED
plug. The plug MUST be plugged into a matching
grounded extension cord in accordance with All local
codes and ordinances. DO NOT MODIFY THE PLUG
PROVIDED. If it will not fi t the properly grounded
extension cord, have the proper outlet installed by a
qualifi ed electrician.
CAUTION!
ALWAYS MAKE SURE THAT
YOUR OUTLET IS PROPERLY GROUNDED. IF
UNCERTAIN, HAVE IT CHECKED BY A CERTIFIED
ELECTRICIAN.
WARNING!
THIS LINE TRIMMER IS FOR
OUTDOOR USE ONLY. DO NOT EXPOSE TO RAIN
OR USE IN DAMP LOCATIONS.
GUIDELINES FOR USING EXTENSION CORDS
USE THE PROPER EXTENSION CORD. Make sure
your extension cord is in good condition. When using
an extension cord, be sure to use one heavy enough to
carry the current your product will draw. An undersized
cord will cause overheating. The table below shows
the correct size to use depending on cord length and
nameplate ampere rating. If in doubt, use the next
heavier gauge. The smaller the gauge number, the
heavier the cord.
Make sure your extension cord is properly wired and in
good electrical condition. Always replace a damaged
extension cord or have it repaired by a qualifi ed person
before use. Keep extension cords away from sharp
objects, excessive heat and damp or wet areas Use
a separate electrical circuit for your tools. This circuit
should comprise a wire of at least 12 gauge and should
be protected with a 15 A time-delayed fuse. Before
connecting the motor to the power line, make sure the
Minimum Gauge for Extension Cords (AWG)
(when using 120V only)
Ampere Rating Total Length of Cord in Feet (meters)
More Than Not More Than 25' (7.6 m) 50' (15.2 m) 100' (30.4 m) 150' (45.7 m)
0 6 18 16 16
14
610181614
12
10 12 16 16 14
12
12 16 14 12 Not recommended
switch is in the OFF position and the electric current
is identical to that stamped on the motor nameplate.
Running at a lower voltage will damage the motor.
9 ― English
ASSEMBLY
UNPACKING
This product requires assembly.
■ Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
■ Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
■ Do not discard the packaging material until you have
carefully inspected and satisfactorily operated the
product.
■ If any parts are damaged or missing, do not operate
the trimmer. Return it for replacement to the retailer
from which it was purchased.
PACKING LIST
Line Trimmer
Flower Guard
Safety Guard with Screws
Auxiliary Handle Assembly with Bolt and Nut
Edging Wheel
Operator’s Manual
FITTING THE SAFETY GUARD
See Figure 3-4.
The Safety Guard prevents cut debris from fl ying back
at the operator.
■ Fit the safety guard into the slots on the trimmer
housing and line up the screw hole in the safety guard
with the screw hole in the trimmer head.
■ Install supplied screw and tighten by turning
clockwise with a Phillips screwdriver.
FITTING THE AUXILIARY HANDLE
See Figure 5-6.
■ Loosen and remove the bolt from the handle.
■ Place the handle on the line trimmer as shown.
■ Adjust the handle to the most comfortable position.
■ Pass the bolt through the auxiliary handle and
the main handle. Tighten the nut to secure. Do not
overtighten the bolt.
FITTING THE EDGING WHEEL
See Figure 7.
■ Slide the edging wheel into the slot located on the
side of the motor housing. It will lock into place.
PREPARING THE TRIMMER FOR USE
See Figure 8-9.
■ Press the rotational lock button and rotate the main
handle counterclockwise. Release button when main
handle has been rotated 180°.
■ Turn the adjustment collar clockwise to unlock. You
can slide the telescopic tube up or down to achieve the
most comfortable working height.
■ Turn the adjustment collar counterclockwise till the
shaft lock into place.
WARNING!
Before assembly, make sure
that the line trimmer is switched off and unplugged.
WARNING!
If any parts are damaged or
missing, do not operate this product until the parts are
replaced. Failure to heed this warning could result in
serious personal injury.
WARNING!
Do not connect to power supply
until assembly is complete. Failure to comply could
result in accidental starting and possible serious
personal injury.
WARNING!
Never attempt to lock the switch
trigger in the ON position.
WARNING!
The line cut-off blade on the
safety guard is sharp. Avoid contact with the blade.
Failure to avoid contact can result in serious personal
injury. Never use the line trimmer unless the guard is
properly fi tted.
10 ― English
OPERATION
STARTING/STOPPING THE TRIMMER
See Figure 10-11.
■ Attach the outlet end of an extension cord to the plug
on the rear of the line trimmer.
NOTE: Use only approved outdoor extension cords.
■ Route the extension cord through the slot located
on the rear of the line trimmer housing and place
underneath the cord retainer.
■ To start the line trimmer, squeeze the safety switch,
then press the switch trigger.
■ To stop the line trimmer, release the switch trigger.
OPERATING THE TRIMMER
See Figure 12.
■ Hold the line trimmer as shown.
■ Gently swing the trimmer from side to side .
■ In order to achieve optimum cutting results, only cut
dry grass.
■ When cutting long or thick grass, start at the top
of the grass blades and gradually work down to the
bottom.
■ If the line trimmer starts running slowly, reduce the
amount of material you are trying to cut.
IF GRASS BECOMES WRAPPED AROUND LINE
HEAD SHAFT:
■ Stop trimmer.
■ Unplug the line trimmer.
■ Remove the grass.
ADJUSTING TRIMMER HEAD ANGLE
See Figure 13.
The trimmer head can be pivoted to seven different
positions.
■ Unplug the line trimmer.
■ Push the pivot button and move the trimmer head up
or down to one of the seven positions indicated by the
notches.
NOTE: Adjust the trimmer head to the fi rst, second and
third notches for trimming and notches four, fi ve, six
and seven for edging, based on preferred trimming and
edging position.
■ Make sure the trimmer head is securely locked into
place before resuming work.
USING THE FLOWER GUARD
See Figure 14.
NOTE: The fl ower guard provides a visual indicator of
the maximum reach of the trimming line.
When the fl ower guard is swung down, it can be used
as a distance guide for use around plants, poles and
fence posts.
ADVANCING LINES USING AUTO FEED
NOTE: The trimmer is equipped with an auto-feed
head. DO NOT bump the head to try to advance the
line as this will damage trimmer and void warranty.
■ With the trimmer running but NOT trimming, release
the switch trigger.
■ Wait two seconds, and press the switch trigger.
NOTE: The line will extend approximately 3/16 in. with
each stop and start of the switch trigger until the line
reaches the length of the line cut-off blade.
■ Resume trimming.
ADVANCING THE LINES MANUALLY
See Figure 1.
NOTE: If lengthy line advancement is required, use the
Advance Button found on the side of the trimmer head.
■ Release the ON/OFF Switch Trigger to stop the unit,
and unplug the trimmer.
■ Depress the manual advance button, and pull one or
both of the two lines. The lines will advance 3/16 inch
and stop. Push the button again to advance more line.
■ Push the button and pull lines out as many times as
it takes to reach the line cut-off blade. Always advance
both lines to the same length.
ROTATING MAIN HANDLE
See Figure 15.
NOTE: The best method of edging is performed with
the main handle rotated.
■ Unplug the line trimmer.
■ Press the rotational lock button and rotate the main
handle clockwise.
■ Release button when main handle has been rotated
180° to the edging position.
EDGING
See Figure 16-17.
■ The edging wheel provides stability and easier
handling when using the trimmer to edge. Simply
swing the edging wheel down from its storage position
into edging position.
Loading...