©2005-2016 Cradlepoint. All Rights Reserved. Part Number: 170710-000
GETTING STARTED
To make configuration changes to your router, open the COR IBR900 administration pages.
1. Connect to the router via Ethernet or WiFi. For WiFi, the
default SSID is found on the product label on the bottom of
the router.
2. Open a browser and type “cp/” or “192.168.0.1” and
press return/enter.
3. When prompted for the Administrator Password,
type the default eight character password found on the
product label.
4. Upon log in for the first time, you are automatically directed to the First Time Setup Wizard to
configure Admin Password, Time Zone, WiFi Security, and WAN failure check.
For more setup instructions, see the COR IBR900 Quick Start Guide and User Manual at
cradlepoint.com/ibr900.
Router Communication / Data Usage
The factory default configuration of the router is set to communicate with Cradlepoint and other resources at regular intervals to
access the latest firmware and modem updates, clock synchronization (NTP), and Enterprise Cloud Manager (ECM) membership. Such
communication may result in data usage and applicable charges regardless of whether the router uses a wired or wireless Internet
connection. To avoid such data usage and potential charges, consult the following Knowledge Base article:
knowledgebase.cradlepoint.com/articles/support/router-communication-data-usage
Deploy and Manage the Intelligent
Network with Cradlepoint
Enterprise Cloud Manager (ECM)
Cradlepoint’s network management and application
platform, Enterprise Cloud Manager, integrates
cloud management with your Cradlepoint devices
to improve productivity, increase reliability,
reduce costs, and enhance the intelligence of your
network and business operations.
Learn more & begin a
free 30-day trial:
services@cradlepoint.com
cradlepoint.com/ecm
IBR900LP6
IBR950LP6
IBR900NM
Model Numbers:
900-qsg-2pgr.indd 2 8/25/16 3:53 PM