CPT CLAA150XP04 Specification
Global LCD Panel Exchange Center
www.panelook.com
Chhuunngghh
C
To :
Date :
CPT TFT-LCD
TeecchhnniiccaallSSppeecciiffiiccaattiioonn
T
waaPPiiccttuurree
w
Tuubbeess,,
T
CLAA 150XP 04
Lttdd..
L
ACCEPTED BY:
APPROVED BY CHECKED BY PREPARED BY
Product Planning
Kevin Chen Sean Lee
Management General
Division
Prepared by : TFT-LCD Application Division
CHUNGHWA PICTUER TUBES, LTD.
No. 1, Huaying Rd., Sanho Tsun, Lungtan Shiang, Taoyuan, Taiwan, 325, R.O.C.
Doc. No:
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
CLAA150XP04-Tatung-SPEC-Ver.1-20110616
TEL: +886-3-4805678 FAX: +886-3-4800589
Issue Date: 2011/06/16
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
1. OVERVIEW
CLAA150XP04 is 15.0” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module
composed of LCD panel, driver ICs, control circuit and backlight. By applying 8 bit digital data (6
bit+Hi-FRC),1024×768, 16.7M-color images are displayed on the 15.0” diagonal screen. Input power
voltage is 3.3V for LCD driving. Converter for backlight is not included in this module. General
specifications are summarized in the following table:
ITEM SPECIFICATION
Display Area(mm) 304.1(H)x228.1(V) (15.0-inch diagonal)
Number of Pixels 1024(H)x768(V)
Pixel Pitch(mm) 0.297 (H)x0.297 (V)
Color Pixel Arrangement RGB vertical stripe
Display Mode Normally white, TN
Number of Colors 16.7M (6 Bit+Hi-FRC)
Brightness(cd/m^2) 400 cd/m2(Typ.)(Center point, 50 mA)
Viewing Angle 160 /140(Typ.)
Surface Treatment Anti-glare
Power consumption(W) 7.11 W Without Converter(Typ.)
Module Size(mm) 326.5 (W)x253.5 (H)x11.0(D)(Typ.)
Module Weight(g)
Backlight Unit LED(White-LED)
1000g(Typ.ʼʳ
CPT Confidential
ʳʳʳʳʳʳʳʳʳʳʳʳʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ʳ
2/22
CLAA150XP04-Tatung-SPEC-Ver.1-20110616
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
2. ABSOLUTE MAXIMUM RATINGS
ITEM SYMBOL MIN. MAX. UNIT REMARK
Power Supply Voltage for LCD VCC 0 6 V
LED Forward voltage VF 3.0 3.4 V
LED Forward current IF -- 150 mA
Operation Temperature Top 0 60
Storage Temperature Tstg -20 65
к
к
[Note]
1).Product life-time relate to LED, please operate production follow statement at page 8“(2)back
light”.
2).When LED current over the definition of operating current ,product life-time will decay rapidly or
operate unusual.
3)The relative temperature and humidity range are as below sketch, 90%RHMax.(TaЉ40к).
1). 2)
3). 4). 5). 7)
3). 4). 5). 7)
4).The maximum wet bulb temperature 39 (TaЉк Ї40 ) and without dewing.к
5).If you use the product in an environment which over the definition of temperature and humidity too
long to effect the result of eye-etching.
6) Test Condition: IEC 1000-4-2 VESDt: Contact discharge to input connector; VESD
: Contact
C
discharge to module
7). If you operate the product in normal temperature range, the center surface of panel should be under
60к.
CPT Confidential
ʳʳʳʳʳʳʳʳʳʳʳʳʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ʳ
3/22
CLAA150XP04-Tatung-SPEC-Ver.1-20110616
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
3. ELECTRICAL CHARACTERISTICS
(1).TFT-LCD
Ta=25к
ITEM SYMBOL MIN TYP MAX UNIT Remark
Power Supply Voltage for LCD Vcc 3.0 3.3 3.6 V *1)
Power Supply Current for LCD Icc - 700 800 mA *2)
Permissive Input Ripple Voltage VRP - - 100 mVp-p Vin=+3.3V
Differential impedance Zm 70 100 110 ȍ
Common
Mode Voltag
Differential
Logic input voltage
LVDS:IN+ΔIN-
Input Voltage
Threshold
Voltage(High)
Threshold
Voltage(Low)
LCD Inrush Current Inrush 2 A *4)
Power consumption P 2.31 2.64 W *2)
VCM 1.125 1.25 1.375 V
|VID| 250 350 450 mV
VTH - - 100 mV
*3)
VTL -100 - - mV
[Note]
1).VCC-turn-on conditions:
0.5msɩt1ɩ10ms 500msɩt4
0ɩt2ɩ50ms 200msɩt5
0ɩt3ɩ50ms 200msɩt6
Vin=3.3V
2.97V
LCD Power Supply
Logic Signal
data
0.33V
t2
t1
VL
Backlight Power Supply
t3
2.97V
0.33V
t4
0.33V
t5 t6
VCC-dip conditions:
Data: RGB DATA, DCLK, DENA
,
(1) When 2.7VЉVcc (min) <3.0V: tdЉ10 ms, module works well.
(2) When VCC <3.0 V, it works abnormal that must reset power. VCC -dip conditions should
also follow the VCC-turn-on conditions.
CPT Confidential
ʳʳʳʳʳʳʳʳʳʳʳʳʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ʳ
4/22
CLAA150XP04-Tatung-SPEC-Ver.1-20110616
www.panelook.com
Global LCD Panel Exchange Center
t
www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
Vcc
2.7V
d
3.0V
2).Typical current situation: 64 gray scale level,1024 line mode, VCC=3.3V, Fh=64Khz,Fv=60Hz,
f
=65 MHz
CLK
.
3).LVDS Signal definition:
Ψ
V
V
TH
TL
VIN+ΚPositive differential DATA & CLK Input
VIN-Κ Negative differential DATA ϟ CLK Input
4).Irush Measurement Condition
CPT Confidential
ʳʳʳʳʳʳʳʳʳʳʳʳʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ʳ
5/22
CLAA150XP04-Tatung-SPEC-Ver.1-20110616
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
(2).Backlight
1. Electrical specification
1-1 single LED
Ta=25 (к Ta: ambient temperature)
ITEM SYMBOL MIN TYP MAX UNIT REMARK
Forward Voltage
Forward Current
Power consumption
VF 3.0 3.2 3.5 V IF=50mA
IF - 50 60 mA 1)
W 160 mW IF =50mA
1-2 150XP04 LED light bar 6Pin Connector (ENTERY 3703K-F06N-13R) Pin Assignment
Pin Name Description
1 Vout Current Feedback 50 mA
2 Vout Current Feedback 50 mA
3 Vin Vin 32V, Total 30pcs LED
4 Vin Vin 32V, Total 30pcs LED
5 Vout Current Feedback 50 mA
6 -- --
CPT Confidential
ʳʳʳʳʳʳʳʳʳʳʳʳʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ʳ
6/22
CLAA150XP04-Tatung-SPEC-Ver.1-20110616
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
2. life time
ITEM
LIFE TIME -- 50000 -- hrs
min typ max
UNIT REMARK
2)Δ3)Δ4)Δ5)
[Note]
1).If dimming function is required, it is strongly recommended to adopt pulse width modulation
(PWM).If not, linear decrease of the driving current will affect the optical characteristics
2).Parameter guideline for LED driving is under stable conditions at 25 (Room Temperature) and к
IF=50mA
3). Definition of the lamp life time: Luminance (L) under 50% of specification.
4). When the ambient temperature Ta overstep 25 , it will serious damage life time.к
5). When the LED operation current IF overstep 50mA, it will serious damage life time.
4. INTERFACE PIN CONNECTION
(1) CN1 (Data Signal and Power Supply)
Outlet connector: MSB240420 (STM) or equivalent
Plug connector: DF14-20S-1.25C (Hirose) or equivalent
PIN # SYMBOL FUNCTION
1 VCC +3.3V Power Supply
2 VCC +3.3V Power Supply
3 GND GND
4 GND GND
5 RXIN0- Negative LVDS Differential Data Input
6 RXIN0+ Positive LVDS Differential Data Input
7 GND GND
8 RXIN1- Negative LVDS Differential Data Input
9 RXIN1+ Positive LVDS Differential Data Input
10 GND GND
11 RXIN2- Negative LVDS Differential Data Input
12 RXIN2+ Positive LVDS Differential Data Input
13 GND GND
14
15
RXCLK
RXCLK
Negative LVDS Differential Clock Input
Positive LVDS Differential Clock Input
16 GND GND
17 RXIN3- Negative LVDS Differential Data Input
18 RXIN3+ Positive LVDS Differential Data Input
19 GND GND
20 NC Reserved
1) Please keep the NC Pin and don’t connect it to GND or other signals.
2) GND Pin must connect to the ground, don’t let it be a vacant pin.
5. INTERFACE TIMING
(1) Timing Specifications
ITEM SYMBOL MIN. TYP. MAX. UNIT
LCD
CPT Confidential
ʳʳʳʳʳʳʳʳʳʳʳʳʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
DCLK
ʳ
Frequency f
7/22
50 65 80 MHz
CLK
CLAA150XP04-Tatung-SPEC-Ver.1-20110616
www.panelook.com
Loading...