CPS Telecom CP226 Users manual

B

WALKIE TALKIE

USER MANUA

CP226

SMART

USINESS

L

1. GENERAL INFORMATION

1.1【Introduction】

The CP226 ARC mini Business Walkie Talkie combines quality and versatility with an elegant design

that ensures effective communications right at your fingertips.

1.2【Key Features】

 53CTCSS and 104 DCS

 Volume setting (1–16)

 Key Lock

 Battery Saving

 0.5Watt High Power Speaker Output

 3.7V 1100mAh Li-Polymer Battery pack

 RSSI―Receiving signal strength indicaon

 Battery Level Indicator

 Standby indicator

 Intelligent ear-microphone adjustment

 IP67 certified * – protected from dust and waterproof

(protected from immersion in water with a depth of 1 meter for up to 30 minutes)

1.3【Accessories】

 CB28 Li-Polymer Battery pack

 Owner’s manual

1.4【Optional Accessories】

 External speaker / microphone

 CS20 Rapid Charger

 CS28 Rapid Charger (4 Slots)

 MC18 USB cable

 CWC18 (S) Charging adapter

/Mic.Cap

Key

Function key

Down Key

Loud Speaker

2. CONTROLS AND INDICATORS

ENGLISH

Power Switch

LCD Display

Up Key

Microphone

PTT

External Speaker

Belt Clip

Battery condition

Channel number

CTCSS/DCS number

CTCSS

DCS

RSSI

2. CONTROLS AND INDICATORS

ENGLISH

lock

CH 1-20

CTCSS /

3. CHARGING THE BATTERY

3.1【Charging】

1) Plug the AC adaptor into a standard electrical outlet

2) Insert the Walkie Talkie into the charging tray for charging.

It will take 3 - 4 hours for full charging

4. MENU SETTING

4.1【Menu Setting】

Press 〔 〕key and〔 〕key simultaneously to enter Menu mode, press〔 〕key to choose

desired menu and press〔 〕key to select the function then press〔 〕key to save it.

If no operation, 10 seconds will automatically exit the menu setting.

VOL SET

STEP 1-16

CH SET

TONE SET

DCS EDIT

ENGLISH

5. CHANNEL SETTING BRIEF NOTE

 Press and hold the〔 〕key on the top of the unit.
 Press〔 〕key and〔 〕key simultaneously until the letter CH is blinking, press

〔 〕key to select the number of Channel.

 Press〔 〕key and the screen will display CTC off , press〔 〕key to select your

desired CTCSS/DCS ( CTCSS 1 – 53, DCS 1 – 104 )

 Press〔 〕key to complete this setting or to press〔 〕key again to have the other

functions , press〔 〕key to select number, you may press〔 〕key at any time

to complete this setting.

 Press〔 〕key at the side and〔 〕key simultaneously to LOCK /UNLOCK the unit,

after Lock, the unit can only be allowed to adjust volume or transmit and receive.