CPS Products TR600 User Manual

TR600 Series

Refrigerant Recovery Machines

OWNER’S MANUAL (English)

Français, Español, Deutsch and latest updates: www.cpsproducts.com

Series: TR600, TR610, TR600C, TR610C, TR600S, TR600K, TR600E

TO BE OPERATED BY QUALIFIED PERSONNEL ONLY

Evaluated for performance in
accordance with Sec. 608 of
the Clean Air Act (Feb 29, 1996)
using AHRI-740-98 test methods.

THIS EQUIPMENT HAS BEEN VERIFIED BY UNDERWRITERS LABORATORIES INC. TO MEET EPA’S MINIMUM REQUIREMENTS FOR RECOVERY
EQUIPMENT INTENDED FOR USE WITH ALL SYSTEMS CONTAINING REFRIGERANTS FROM ARI740-98 CATEGORIES III, IV, AND V. UL CONTROL
NUMBER 2HA5.

CONTENTS

Key Features.......................................................................................................................................2

General Safety Instructions.................................................................................................................3

Specifications.....................................................................................................................................4

Controls and Features ........................................................................................................................ 5

Direct Vapor or Liquid Recovery.........................................................................................................6

Push-Pull Liquid Recovery ................................................................................................................ 7

Routine Maintenance..........................................................................................................................8

Warranty & Contact Information ......................................................................................................... 8

KEY FEATURES

• Powerful 2/3 HP oilless 2 cylinder reciprocating recovery compressor

• Exceptional compressor, condensing & cooling systems allow fast recovery in high temperature
environments

• R-410a ready with 550 psi high pressure shut-off switch

• Durable inlet and outlet ball valve construction with 1/4 shut-off valves

• Integrated component moorings for quiet operation

• High impact injection molded housing

• Ergonomic well balanced design for easy transport

• No tool access suction housing for easy filter clean/change

• Designed and manufactured in U.S.A. with U.S. and globally sourced components

• Worldwide patents pending

• Less parts mean greater reliability

2

GENERAL SAFETY INSTRUCTIONS

Please read, follow and understand the contents of this entire manual, with special
attention given to Danger, Warning and Caution statements.

FOR USE BY PROFESSIONALLY TRAINED AND CERTIFIED OPERATORS

ONLY. MOST STATES, COUNTRIES, ETC., MAY REQUIRE THE USER TO BE
LICENSED. PLEASE CHECK WITH YOUR LOCAL GOVERNMENT AGENCY.

DANGER- EXPLOSION RISK!!! DO NOT RECOVER FLAMMABLE

REFRIGERANTS!!

DANGER: The recovery tank used with this contains liquid refrigerant. Overfilling of

the recovery tank may cause a violent rupture resulting in severe injury or
even death. As a minimum, please use a scale to continuously monitor the
recovery tank weight.

DANGER: ELECTRICAL SHOCK HAZARD: Always disconnect power source when

servicing this equipment.

WARNING: Do not use this equipment in the vicinity of spilled or open containers of

gasoline or other flammable substances.

WARNING: All hoses may contain liquid refrigerant under pressure. Contact with

refrigerant may cause frostbite or other related injuries. Wear proper
personal protective equipment such as safety goggles and gloves. When
disconnecting any hose, please use extreme caution.

WARNING: TO REDUCE THE RISK OF FIRE: Avoid the use of an extension cord

because the extension cord may overheat. However, if you must use an
extension cord, the cord shall be 10 awg minimum.

WARNING: Avoid breathing refrigerant vapors and lubricant vapor or mist.

Breathing high concentration levels may cause heart arrhythmia, loss of
consciousness, or even cause suffocation. Exposure may irritate eyes,
nose, throat and skin. Please read the manufacturer’s Material Safety Data
Sheet for further safety information on refrigerants and lubricants.

WARNING: Make certain that all safety devices are functioning properly before

operating the equipment.

CAUTION: To avoid cross contamination of refrigerant and potential leakage to the

atmosphere, the proper hoses and fittings should be used and checked for
damage.

CAUTION: To avoid overfilling the refrigerant tank, read and follow the manufacturer’s

recommended filling instructions for the refrigerant being recovered.

CAUTION: This equipment is intended for use of one refrigerant at a time until the

Self-Clearing feature is used. Mixing of different refrigerants will cause
your recovered supply of refrigerant to become contaminated. Note: It is
very expensive to destroy mixed or damaged refrigerants.

3