CPS CP226 User Manual

SMART
WALKIE TALKIE
USER MANUA
CP226
USINESS
L
1.1Introduction
The CP226 ARC mini Business Walkie Talkie combines quality and versatility with an elegant design
that ensures effective communications right at your fingertips.
1.2Key Features
53CTCSS and 104 DCS
Volume setting (1–16)
Key Lock
Battery Saving
0.5Watt High Power Speaker Output
3.7V 1100mAh Li-Polymer Battery pack
RSSI―Receiving signal strength indicaon
Battery Level Indicator
Standby indicator
Intelligent ear-microphone adjustment
IP67 certified * – protected from dust and waterproof
(protected from immersion in water with a depth of 1 meter for up to 30 minutes)
1.3Accessories
CB28 Li-Polymer Battery pack
Owner’s manual
1.4Optional Accessories
External speaker / microphone
CS20 Rapid Charger
CS28 Rapid Charger (4 Slots)
MC18 USB cable
CWC18 (S) Charging adapter
1. GENERAL INFORMATION
2. CONTROLS AND INDICATORS
External Speaker
/Mic.Cap
PTT
Key
Function key
Belt Clip
Down Key
LCD Display
Up Key
Microphone
Loud Speaker
ENGLISH
Power Switch
2. CONTROLS AND INDICATORS
lock
Battery condition
Channel number
CTCSS/DCS number
CTCSS
DCS
RSSI
ENGLISH
3.1Charging
1) Plug the AC adaptor into a standard electrical outlet
2) Insert the Walkie Talkie into the charging tray for charging.
It will take 3 - 4 hours for full charging
4.1Menu Setting
Press key and key simultaneously to enter Menu mode, press key to choose
desired menu and press key to select the function then presskey to save it.
If no operation, 10 seconds will automatically exit the menu setting.
Press and hold the key on the top of the unit. Press key and key simultaneously until the letter CH is blinking, press
〕key to select the number of Channel.
Press key and the screen will display CTC off , press key to select your
desired CTCSS/DCS ( CTCSS 1 – 53, DCS 1 – 104 )
Press key to complete this setting or to press key again to have the other
functions , press key to select number, you may press key at any time
to complete this setting.
Press key at the side and key simultaneously to LOCK /UNLOCK the unit,
after Lock, the unit can only be allowed to adjust volume or transmit and receive.
3. CHARGING THE BATTERY
4. MENU SETTING
VOL SET
STEP 1-16
CH SET
TONE SET
CH 1-20
CTCSS /
DCS EDIT
5. CHANNEL SETTING BRIEF NOTE
ENGLISH
Loading...
+ 11 hidden pages