Please ensure that all the above contents are correct. If any are missing please notify us immediately
2. Quick reference programming guide
To enter programming mode
.*. Master code .#.
999999 is the default master code
To exit programming mode
.*.
Note that to undertake the following programming the master user must be logged in
To change the master code
0. .New code. .#. .New code. .#.
The master code can be 6 to 8 digits
To add a PIN user
.1. .User ID number. .#. .PIN. .#.
The ID number is any number between 1 & 2000. The PIN is any four
digits between 0000 & 9999 with the exception of 1234 which is
reserved. Users can be added continuously without exiting
programming mode.
To add a card user
.1. .Read card. .#.
Cards can be added continuously without exiting programming mode
To delete a PIN or card user
.2. .User ID number. .#.
for a PIN user or
.2. .Read card. .#.
for a card user
Users can be deleted continuously without exiting programming
mode
To unlock the door for a PIN user
Enter the .PIN. then press .#.
To unlock the door for a card user
.Read valid card.
3. Description
The unit is a single door multifunction standalone access controller or a Wiegand output keypad or card
reader. It is suitable for mounting either indoors only. It is housed in a strong, sturdy and vandal proof zinc
alloy electroplated case. This unit supports up to 2000 users in either a card, 4 digit PIN, or a card + PIN
option. The inbuilt card reader supports 125KHZ EM cards. The unit has many extra features including lock
output current short circuit protection, Wiegand output, and a backlit keypad. These features make the
unit an ideal choice for door access not only for small shops and domestic households but also for
commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons.