Cpr V106 User Manual
USER GUIDE
®
V.106
www.cprcallblocker.com
Thank you
for purchasing CPR Call Blocker.
You are now in control of your privacy.
The CPR Team
INTRODUCTION
Congratulations on your new purchase!
Congratulations on your new purchase!
Before using this user guide please read the following important information:-
Before using this user guide please read the following important information:-
• Call Blocker protects a single corded phone, or a cordless phone with additional handsets
• Call Blocker protects a single corded phone, or a cordless phone with additional handsets
• Caller Identity service (Caller ID) from your telephone provider is required for Call Blocker
• Caller Identity service (Caller ID) from your telephone provider is required for Call Blocker
to work eectively.
to work eectively.
• Caller ID is telephone service that provides for subscribers the telephone number of a
• Caller ID is telephone service that provides for subscribers the telephone number of a
caller, which appear on a display as the call is being received. It is available from most
caller, which appear on a display as the call is being received. It is available from most
telephone companies. To register for Caller ID contact your telephone operator - Caller ID is
telephone companies. To register for Caller ID contact your telephone operator - Caller ID is
available free with BT and most other providers, just dial 150 to nd out.
available free with BT and most other providers, just dial 150 to nd out.
• The CPR Call Blocker will work with a wide range of telephone equipment including corded
• The CPR Call Blocker will work with a wide range of telephone equipment including corded
and cordless phones. It protects all the phones that are plugged into it. If you need a
and cordless phones. It protects all the phones that are plugged into it. If you need a
number of extensions in your house we recommend that you use a modern multi-handset
number of extensions in your house we recommend that you use a modern multi-handset
cordless phone system (Also known as a DECT system) so that the CPR Call Blocker can then
cordless phone system (Also known as a DECT system) so that the CPR Call Blocker can then
protect all your phones.
protect all your phones.
• We recommend that you do not use the CPR Call Blocker with phones plugged into other
• We recommend that you do not use the CPR Call Blocker with phones plugged into other
extension sockets in your house. This might cause other phones to ring once if a blocked
extension sockets in your house. This might cause other phones to ring once if a blocked
number is calling.
number is calling.
• Some phones automatically check the 1571 network voicemail service at regular intervals
• Some phones automatically check the 1571 network voicemail service at regular intervals
and display a ‘Message waiting’ light. These are called 1571 phones. We recommend that you
and display a ‘Message waiting’ light. These are called 1571 phones. We recommend that you
do not use 1571 phones with The CPR Call Blocker
do not use 1571 phones with The CPR Call Blocker
1
SETTING UP
2
CPR CALL BLOCKER
Step 1
Step 1
Remove the line cable from your telephone and plug into the LINE 1 port of the Call
Remove the line cable from your telephone and plug into the LINE 1 port of the Call
Blocker.
Blocker.
Disconnect line cable from
your telephone and plug into
02.
the LINE 1 port of the
Call Blocker
Step 2
Step 2
Use the small Black cable provided to connect the TEL 1 port to your telephone
Use the small Black cable provided to connect the TEL 1 port to your telephone
Step 3
Step 3
Insure all cables are connected securely
Insure all cables are connected securely
The Call Blocker is setup correctly when there is a red light displayed on the top of the
The Call Blocker is setup correctly when there is a red light displayed on the top of the
unit when the phone is off the receiver or when on a call. If you are using a cordless
unit when the phone is off the receiver or when on a call. If you are using a cordless
phone press the Call Button for a dial tone.
phone press the Call Button for a dial tone.
If you have no dial tone or no red light when on a call you will need to disconnect the
If you have no dial tone or no red light when on a call you will need to disconnect the
cables then reconnect using the LINE 2 and TEL 2 ports.
cables then reconnect using the LINE 2 and TEL 2 ports.
Loading...