Cpr V105, V104, V103 User Manual

USER GUIDE

®

V.103/104/105

www.cprcallblocker.com

Thank you

for purchasing CPR Call Blocker.

You are now in control of your privacy.

The CPR Team

INTRODUCTION

Congratulations on your new purchase!

Before using this user guide please read the following important information:-

• Call Blocker protects a single corded phone, or a cordless phone with additional handsets

• Caller Identity service (Caller ID) from your telephone provider is required for Call Blocker

to work eectively.

• Caller ID is telephone service that provides for subscribers the telephone number of a

• Caller ID is telephone service that provides for subscribers the telephone number of a caller, which appear on a display as the call is being received. It is available from most

caller, which appear on a display as the call is being received. It is available from most telephone companies. To register for Caller ID contact your telephone operator - Caller ID is

telephone companies. To register for Caller ID contact your telephone operator - Caller ID is available free with BT and most other providers, just dial 150 to nd out.

available free with BT and most other providers, just dial 150 to nd out.

• The CPR Call Blocker will work with a wide range of telephone equipment including corded

• The CPR Call Blocker will work with a wide range of telephone equipment including corded and cordless phones. It protects all the phones that are plugged into it. If you need a

and cordless phones. It protects all the phones that are plugged into it. If you need a number of extensions in your house we recommend that you use a modern multi-handset

number of extensions in your house we recommend that you use a modern multi-handset cordless phone system (Also known as a DECT system) so that the CPR Call Blocker can then

cordless phone system (Also known as a DECT system) so that the CPR Call Blocker can then

protect all your phones.

• We recommend that you do not use the CPR Call Blocker with phones plugged into other

• We recommend that you do not use the CPR Call Blocker with phones plugged into other extension sockets in your house. This might cause other phones to ring once if a blocked

extension sockets in your house. This might cause other phones to ring once if a blocked number is calling.

number is calling.

• Some phones automatically check the 1571 network voicemail service at regular intervals

• Some phones automatically check the 1571 network voicemail service at regular intervals and display a ‘Message waiting’ light. These are called 1571 phones. We recommend that you

and display a ‘Message waiting’ light. These are called 1571 phones. We recommend that you do not use 1571 phones with The CPR Call Blocker

do not use 1571 phones with The CPR Call Blocker

1

SETTING UP

2

CPR CALL BLOCKER

Step 1

Remove the line cable from your telephone and plug into the LINE 1 port of the Call

Blocker.

Disconnect line cable from

your telephone and plug into

02.

the LINE 1 port of the

Call Blocker

Step 2

Use the small Black cable provided to connect the TEL 1 port to your telephone

Step 3

Insure all cables are connected securely

The Call Blocker is setup correctly when there is a red light displayed on the top of the

unit, this is shown when the phone is oﬀ the receiver or when on a call. If you are using

a cordless phone then press the Call Button for a dial tone.

If you have no dial tone or no red light you will need to disconnect the cables then

reconnect using the LINE 2 and TEL 2 ports.

INSTALLATION DIAGRAM

Main Wall

Short Black

Cable Provided

3

Socket

Telephone

line Cable

BLOCK NOW

The easiest way to block Nuisance Callers is to use the BLOCK NOW button located on

the top of the Call Blocker.

When a Nuisance Caller gets through press the ‘BLOCK NOW’ button and then hang up

the call, this Caller will now be blocked from calling again.

You can also use this function without having to answer the phone.

For example: If an unfamiliar number is calling, press the BLOCK NOW button and the

CPR Call Blocker will stop that number from calling again.

The Block Now Button only works with Visible numbers. If you are receiving nuisance

calls from ‘WITHHELD’ or ‘INTERNATIONAL’ numbers please use the programming codes

on pages 5 and 6.

103 MODEL PROGRAMMING CODES

Programming a number into "Blocking" list

1. Get a dial tone and input

2. Then enter the telephone number you wish to block, followed by the # key,

You will hear a ‘beep’ to conrm success.

3. Enter the next number or hang up to complete setup.

Erasing one Number from the "Blocking" list

1. Get a dial tone and input

2. Then enter the telephone number you wish to delete followed by the # key,

you will hear a ‘beep’ to conrm success.

3. Hang up to complete setup.

Resetting the Call Blocker back to factory settings

1. Get a dial tone and input

You will hear a ‘beep’ to conrm success.

* 7 # you will hear a "Beep”

* 6 # you will hear a ‘beep’

* 1 # * 1 #

4

Note:

Three

"Beeps” indicated that an error has occurred - Either a number has been

entered incorrectly or the function is already ON..

104 /105 MODEL PROGRAMMING CODES

Block Last Calling Number

1. To block last number: Get a dial tone and input

You will hear a ‘beep’ after each # to conrm success.

Turning Call Blocker On and Oﬀ

1. To Turn On: Get a dial tone and input

2. To Turn Oﬀ : Get a dial tone and input * * 3 # *3#

You will hear a ‘beep’ after each # to conrm success.

Blocking all “Withheld” Callers

1. To Turn On: Get a dial tone and input

2. To Turn Oﬀ : Get a dial tone and input * * 6 # 7*#

You will hear a ‘beep’ after each # to conrm success.

Alternative “Withheld” blocking function

1. To Turn On: Get a dial tone and input * * 7 # #

* * 4 # *4#

* * 7 # 7*#

( Use this if the conventional code doesn’t work)

* * 2 # * 2 #

6

2. To Turn Oﬀ : Get a dial tone and input * * 6 # #

You will hear a ‘beep’ after each # to conrm success.

104 /105 MODEL PROGRAMMING CODES

Blocking all “International” Callers

1. To Turn On: Get a dial tone and input

2. To Turn Oﬀ : Get a dial tone and input * * 6 # * #

You will hear a ‘beep’ after each # to conrm success.

Blocking all IP Dialling systems (skype / overseas nuisance call centres)

1. To Turn On: Get a dial tone and input

2. To Turn Oﬀ : Get a dial tone and input * * 6 # 6*#

You will hear a ‘beep’ after each # to conrm success.

Blocking all “0” type calls (Single digit spoof callers)

1. To Turn On: Get a dial tone and input

2. To Turn Oﬀ : Get a dial tone and input * * 6 # 0#

You will hear a ‘beep’ after each # to conrm success.

Resetting the Call Blocker back to factory settings

1. Get a dial tone and input

** 1 # * 1 #

* * 7 # * #

* * 7 # 6*#

* * 7 # 0#

7

You will hear a ‘beep’ after each # to conrm success.

Note: Three

entered incorrectly or the function is already ON.

"Beeps” indicated that an error has occurred - Either a number has been

FREQUENTLY ASKED QUESTIONS

Q. Will the CPR Call Blocker work with my broadband?

A. The CPR Call Blocker will work ne alongside your broadband connection - But it is

important to use broadband Filters at the wall socket.

Q. How much power does the CPR Call Blocker use?

A. The CPR Call Blocker uses only the power from your telephone line which is of no cost

to you!

Q. Which landline providers does the CPR Call Blocker support?

A. The CPR Call Blocker will work on all domestic telephone lines including BT & Virgin

Q. Do I need caller ID for this product to work?

A. Yes. Caller ID should be enabled on your telephone line for the product to work

eﬀectively. Caller ID Display is available free for BT customers

Q. Can I use any telephone with the CPR Call Blocker?

A. The CPR Call Blocker will work with a wide range of modern telephone equipment -

cordless DECT phones, cordless analogue phones.

Q. Can I use the CPR Call Blocker with extension telephone sockets?

8

A. The CPR Call Blocker is designed to work on one telephone socket. If you want

additional phones around the home it is best to use a DECT phone with multiple

cordless handsets. The Call Blocker will then be connected to the base unit and help

protect the additional DECT handsets.

GENERAL INFORMATION

Safety

• Simply clean CPR Call Blocker with a damp cloth. Do not use chemicals or abrasive

cleaning products.

• Do not open CPR Call Blocker as there are voltages inside the unit.

Environmental

• CPR Call Blocker is intended for indoor use only.

• Do not submerge any part of CPR Call Blocker in water and do not use it in

damp or humid conditions, such as in bathrooms.

• Do not expose CPR Call Blocker to re, explosive or other hazardous conditions.

• There is a slight chance that CPR Call Blocker could be damaged by an electrical storm.

We recommend that you unplug the telephone line cord for the duration of the storm

as such damage is not covered by the guarantee.

Data Protection

We are registered under the Data Protection Act 1998 (registration Z2140320 ).

The data controller is CPR Global Limited of York Chambers,

9

York Street, Swansea , SA1 3LZ

We will process personal data disclosed by you in accordance with

our privacy policy published on our web site (www.cprcallblocker.com)

NEED MORE HELP?

Need more help?

If you need further help setting up CPR Call Blocker please email or phone through to our

Technical support team for help with problems, or advice.

CPR Global

Post :

CPR Global LTD

04.

York Chambers

York Street

Swansea

UK

SA1 3LZ

E-mail : support@cprcallblocker.com

Phone : +44 0800 652 7780

Patent Number - 1200049.3

www.cprcallblocker.com

Disposal instructions Waste electronic equipment should be

separated from your normal household waste and taken to your local recycling

centre for disposal, or back to where you bought the equipment. Proper recycling of electronic equipment will help

For more products from CPR Global, please visit our website

www.cprdistribution.com

And view our fantastic range of innovative products

103 MODEL PROGRAMMING CODES

Blocking all “Withheld” Callers

5

1. To Turn On: Get a dial tone and input

2. To Turn Oﬀ : Get a dial tone and input * 6 # 7*#

You will hear a ‘beep’ to conrm success.

Blocking all “International” Callers

1. To Turn On: Get a dial tone and input

2. To Turn Oﬀ : Get a dial tone and input * 6 # * #

You will hear a ‘beep’ to conrm success.

Blocking all IP Dialing systems (skype / overseas nuisance call centers)

1. To Turn On: Get a dial tone and input

2. To Turn Oﬀ : Get a dial tone and input * 6 # 6*#

You will hear a ‘beep’ to conrm success.

Blocking all “0” type calls (Single digit spoof callers)

1. To Turn On: Get a dial tone and input

2. To Turn Oﬀ : Get a dial tone and input * 6 # 0#

You will hear a ‘beep’ to conrm success.

* 7 # 7*#

* 7 # * #

* 7 # 6*#

* 7 # 0#

104 /105 MODEL PROGRAMMING CODES

Programming a number into "Blocking" list

1. Pick up the telephone and input

2. Then enter the telephone number you wish to block, followed by the # key,

You will hear a ‘beep’ after each # to conrm success.

3. Enter the next number or hang up to complete setup.

Programming an area code into "Blocking" list

1. Pick up the telephone and input

2. Then enter the area code you wish to block, followed by the # key,

You will hear a ‘beep’ after each # to conrm success.

3. Enter the next area code or hang up to complete setup.

Erasing one number or area code from the "Blocking" list

1. Pick up the telephone and input

2. Then enter the telephone number you wish to delete followed by the # key,

* *7 # you will hear a "Beep”

* * 7 # you will hear a "Beep”

* * 6 # you will hear a ‘Beep’

You will hear a ‘beep’ after each # to conrm success.

3. Hang up to complete setup.

Cpr V105, V104, V103 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual