V10000
QUICK START GUIDE
Robocalls Unknown Calls Overseas Call Centers
Scam CallsBLOCKS ALL
WELCOME TO YOUR CPR V10000
The latests in call blocking technology, preprogrammed with
10,000 of the latest scam/robocall numbers plus you have the
ability to block a further 2,000 numbers at the touch of the
ashing Block Now button.
Happy Blocking!!
1
YOUR CPR V10000
FRONT
1. LCD screen
2. Block Now button (ashes with incoming call)
3. Call List button
4. Block List button
5. Delete button
6. Allow List button
BACK
1. TEL1 port
2. LINE1 port
3. TEL port
4. LINE port
2
1
2
3
4
5
6
1
2
3
4
This product requires Caller ID service from your network provider.
!
Display screen 3
1
CALL BLOCK ALLOW MODE LIST 0000
0005
4
1. Displays which operating mode the Call Blocker is set to (ALLOW MODE
or BLOCK MODE) and also which list menu you are in (CALL LIST, BLOCK LIST,
ALLOW LIST).
2. Displays the number of times a BLOCKED call has tried to re-call.
3. Displays the amount of numbers that have been added to the BLOCK LIST.
4. Displays the Additional Blocking Features that have been activated.
UNKNOWN INTERNATIONAL PRIVATE VOIP CALL
2
3
Standard set up
1.
Unplug the Line Cable
from your telephone.
2.
Take the Line Cable that
you unplugged from your
telephone and insert it into
the LINE port of the Call
Blocker.
4
STANDARD set up
3.
Insert the short black
cable provided into
the TEL port.
Placing the other end
into the telephone.
4.
The call blocker
screen should now
display ‘0000’.
Pick up the
telephone handset
and check that your
dial tone is working.
5
If caller ID or power issues arise try the parallel setup method on page 5.
!
PARALLEL set up
1.
Unplug the Line Cable
from your telephone.
2.
Take the Line Cable that
you unplugged from your
3.
telephone and insert it into
the LINE port of the Call
Blocker.
6
parallel set up
3.
Insert the red end of
the white cable
provided into the
LINE1 port. Placing
the other end into the
telephone.
4.
The call blocker
screen should now
3.
display ‘0000’.
Pick up the
telephone handset
and check that your
dial tone is working.
7
operating MODEs
You should now be set up correctly and ready to start blocking
those pesky unwanted Robocalls!
The V10000 has two operating modes: Block Mode and Allow Mode.
As default the call blocker will be set in Block Mode.
Block mode
8
1.
If the call is unwanted, simply press the ashing BLOCK NOW button.
2.
The number will then be added to the BLOCK LIST and
cannot call you again.
3.
If using a cordless DECT phone system, press # then 2 (during a call)
from any handset to activate the Block Now function. Then hang up.
BLOCK
NOW
1
2 3
4
5 6
7 8
0*#
9
OPERATING MODES
allow mode
1.
When the Call Blocker is set in ALLOW MODE only numbers
programmed in the ALLOW LIST can call.
9
2.
If you want to set the Call Blocker into ALLOW MODE simply hold
down the ALLOW LIST button until ‘SUCCESSFUL’ is displayed.
3.
There are three ways to add numbers to the ALLOW LIST:
1. Pressing the ALLOW LIST button on a number in the CALL LIST
2. Pressing the ALLOW LIST button on a number in the BLOCK LIST
3. By Manual Entry (follow the instructions on page 11).
4.
To remove a number from the ALLOW LIST scroll to nd the number
and hold down the DELETE button for 5 seconds.
5.
If you wish to revert back to BLOCK MODE simply hold down the
BLOCK LIST button until ‘SUCCESSFUL’ is displayed.
ALLOW LIST
DELETE
BLOCK LIST
BUTTON DESCRIPTION
1.
BLOCK NOW
By pressing the BLOCK NOW button during a call, the number will
be added to the BLOCK LIST and will not be able to call you again.
10
BLOCK
NOW
BLOCK LIST
Displays the numbers that you have added to the BLOCK LIST.
To navigate through the list use the ( ) keys.
ALLOW LIST
To navigate through the numbers that you have added to the
ALLOW LIST use the ( ) keys .
CALL LIST
Displays the last 20 incomming call records. To navigate through
the list use the ( ) keys. To add any of the CALL LIST numbers
to the BLOCK LIST simply press the BLOCK NOW button.
DELETE
To remove a number from the BLOCK or ALLOW lists, scroll to nd
the number and hold down the DELETE button for 5 seconds.
home
By pressing the CALL LIST and DELETE button together you will
return to the Home screen.
BLOCK LIST
ALLOW LIST
CALL LIST
DELETE
CALL LIST
DELETE
Programming V10000
ADD NUMBERS TO THE BLOCK LIST OR ALLOW LIST
Pick up the telephone handset. When you have a dial tone enter number and press Block List or
Allow List.
ADDITIONAL BLOCKING FEATURES
Pick up the telephone handset. When you have a dial tone. Please enter the codes on your
telephone keypad you wish to apply. You will hear a single “beep” after each # to conrm a
successful entry. You will hear multiple “beeps” if a code or number has been previously entered.
11
Blocking all Private Callers
1
* * 7 # (beep) * # (beep)
Blocking all Out of Area Callers/International
2
* * 6 # (beep) * # (beep)
* * 7 # (beep) # (beep)
Blocking all Unknown Callers
3
* * 6 # (beep) # (beep)
* * 7 # (beep) 0 0 # (beep)
Blocking all International numbers with 00 prexes
4
* * 6 # (beep) 0 0 # (beep)
* * 7 # (beep) 6 * # (beep)
Blocking all VOIP/IP Rogue Dialler Callers
5
* * 6 # (beep) 6 * # (beep)
* * 0 # (beep) *1# (beep)
Play voice message to blocked callers
6
* * 0 # (beep) *0# (beep)
RESET CALL BLOCKER BACK TO FACTORY SETTINGS
Press and hold Block List and Allow List together for 5 seconds (until “SUCCESSFUL” is displayed).
Turn on: * * 7 # (beep) 7 * # (beep)
Turn o: * * 6 # (beep) 7 * # (beep)
On:
O:
On:
O:
On:
O:
On:
O:
On:
O:
FAQ (frequently asked questions)
Q. My answering machine has stopped working correctly?
A. The Call Blocker silences the rst 1 or 2 ‘rings’ on the line while it checks the BLOCK LIST, this can
cause some answering machines to initiate earlier than usual. To resolve this try increasing the number of
rings before the answering machine answers a call to 6. If this doesn’t work try connecting the Call
Blocker in the parallel set up.
Q. I keep getting a busy signal when entering codes?
A. Set up the Call Blocker using the standard method and hold down the Block Now button for 5 – 10
seconds, this will enable programming mode which will allow codes to be entered.
Q. Why is my call blocker blocking wanted calls?
A. Ensure that you have an active caller ID subscription, otherwise the call blocker will treat all
calls as unwanted. Caller I.D is required for the Call Blocker to read the number
.
Q. Why do callers that I have blocked still come through?
A. This is a ‘Rogue Dialler’ or a ‘VOIP’ caller, they use computers to call numerous people at once and
spoof their number to allow themselves to contact people continuously. Please enter the following code
with a dial tone: * * 7 # 6 * # To block ‘Rogue Diallers‘
Q. Why is there is an error message on my call blocker?
A. This is caused by a power surge on the line that has caused the Call Blocker to shut down protecting
itself from damage, please disconnect the call blocker from the power for 1 hour, then reconnect.
Q. I’m having diculty adding programming codes?
A. We are here to help, our technical support team can assist you by remotely accessing your call blocker
while you are on the phone to us. WE CAN INSERT THE CODES YOU WISH TO ADD.
Q. How do I Unblock/Block a Cell Phone Number (USA)?
A. To unblock a Cell Phone Number, get a dial tone and enter: * * 6 # 1 FULL NUMBER #, to Block a Cell
Phone Number enter: * * 7 # 1 FULL NUMBER #
12
For more FAQ’s please visit www.support.cprcallblockerusa.com
or call our tech support team on: 888 - 507 - 7486
EXTENDED WARRANTY
DONT FORGET! You have a FREE 1 year manufacturers warranty
with your Call Blocker, you can extend to a 3-Year warranty
for only $9.99.
Register your warranty: www.callblockerusa.com/warranty
Did We Make You Happy?
Why not leave a review?
Simply visit: www.callblockerusa.com
Did We Do Something Wrong?
Let us put it right!
Simply contact our customer service team and
we will be happy to x it for you.
DON’T FORGET TO REGISTER YOUR WARRANTY
Please visit: www.callblockerusa.com/warranty
For technical support please visit www.support.cprcallblockerusa.com
or call our tech support team on: 888-507-7486
13
OUR MISSION
CPR Call Blocker was created to keep
people safe from scam and nuisance
robocalls. Proving a simple, low cost,
eective blocking solution has always
been at the forefront of its creation.
CPR Call Blocker now helps over
1,000,000 home owners and businesses
in over twelve countries solve their
nuisance robocall problems.
CPR now design and manufactures a range of helpfull products from cell phones
to GPS Tracking emergency assit technology. For more information on our
innovative products please visit www.callblockerusa.com.
14
We would like to thank all our customers and partners
in helping us achieve the following Awards:
Thank you for purchasing the
V10000
The Ultimate Call Blocker
from the
Contact Us
Skype: cprcallblocker
support@callblockerusa.com
www.callblockerusa.com
Tech Support
USA: 888-507-7486
AUS: 1 800 187 358
UK: 0800 652 7780
CPR Global Tech
2711 Centerville Road
Wilmington
Delaware | 19808 - 1645
Loading...