CPCLA FR2S2025, FR2S1525, FR2S1520, FR2S1030, FR2S1020 Datasheet

Features Description

Maximum Operate Value (NI)

Minimum Operate Value (NI)

FR2SXXXX

• Small size

• SMT-compatible

• Easily formed leads

• Sputtered ruthenium contacts

• Hermetically sealed contacts

• Fast switching speed — up to 500Hz

• Wide range of available magnetic sensitivities

Clare’s DYAD® dry reed switches are ideally suited for
small switching signal applications. This switch has
sputtered ruthenium contacts and an extraordinary seal
strength, achieved by a patented laser sealing of the glass.
In low level or dry switching environments, both switches
typically provide >1 billion operations. The switches have
hermetically sealed contacts and offer a wide range of
available magnetic sensitivities.

Dyad

FR2

®

Applications

• Security

• Proximity sensing

• Smoke alarms

• Automotive

• Level sensor

• Lamp current sensor

• Relays

Approvals

• UL listed

Standard Test Coil

The magnetic force (expressed in NI, AT or Ampere Turns) required to cause the reed switch contacts to
close is called the pull-in or operate value.

FR2

Part # Coil - 1
Coil definition NARM1 CTC01
Coil resistance 1200Ω
Number of turns 5,000
Wire size (nom. diameter) 0.0399mm (AWG 46)
Bobbin diameter (inside coil) 3.96mm
Winding length 10.4mm

(1)

Consult factory for test procedure.
The reed switch shall be placed in the test coil with the gap centered in the core of the coil winding.
Test leads and their clips must be non-magnetic.
The longitudinal axis of the test coil and the test switch shall be vertical.

Ordering Information

A complete part number is represented by the digits to the right. For example, FR2S1030 is a
DYAD® with a minimum operate value of 10 and a maximum of 30. Refer to the switch operating
specification charts for available ranges. Special ranges are available upon request.

Surface Mount Dyad
Refer to operating characteristics table for complete part number.

®

DYAD

Part # Operate Range (NI)

FR2S1015 10 to 15
FR2S1020 10 to 20
FR2S1030 10 to 30
FR2S1520 15 to 20
FR2S1525 15 to 25
FR2S2025 20 to 25

DYAD® Surface Mount

Part # Operate Range (NI)

FR2024 10 to 15
FR2259 10 to 20
FR2282 10 to 30
FR2025 15 to 20
FR2249 15 to 25
FR2026 20 to 25

1

Tolerance = ± 1.5NI

2

Full Blade Sensitivity

3

Surface Mount Switches are packaged 3,000 parts per reel

1

1,2,3

DS-FR2-R2

www.clare.com

1

Dyad

FR2

®

Ratings (@ 25˚ C)

Parameter Min Typ Max Units

Switching Voltage
FR2 - DYAD
Switching Current
FR2 - DYAD
Carry Current
FR2 - DYAD

®

®

®

200 Volts

0.5 Amps

1.5 Amps

Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for extended period may degrade the device and effect
its reliability.

Switching Frequency
FR2 - DYAD

®

500 Hz
Contact Resistance
FR2 - DYAD

(See detailed specifications for more information.)

®

150 mΩ

Specifications

All parameters are at 25°C unless otherwise stated.

PARAMETER CONDITIONS SYMBOL MIN TYP MAX UNITS

Contact Ratings

Operate ampere turns range Full Blade Tolerance = ± 1.5NI AT 10 - 30 NI
Release ampere turns range Full Blade Tolerance = ± 1.5NI AT 5 - 30 NI
Switching Voltage Max DC/PeakAC Resistive V
Switching Current Max DC/PeakAC Resistive I
Carry Current Max DC/PeakAC Resistive I

L

L

C

Contact Rating Max DC/PeakAC Resistive - - - 10 VA
Life Expectancy 1V, 10mA Signal Level - - 1000 - x10

10V, 10mA Low Level - - 500 - x10

50V, 100mA Telecom Load - - 2 - x10

100V, 100mA Rated Loads - - 2 - x10

Static Contact Resistance 50mV, 10mA

(1)

CR - 80 150 mΩ

Contact Material - - Ru - -

Switch Specifications

Insulation Resistance

(2)

100V, 25°C, 40% RH IR 10
Capacitance Across Open Contacts - - 0.3 - pF
Dielectric Strength
Operate Time, At nominal coil voltage, T

(5)

Between Contacts - 250 300 - VDC/Peak AC

OP

including bounce 10Hz Square Wave

Release Time Zener-Diode Suppression

(3)

T

REL

Environmental Ratings

Storage Temperature T
Operating Temperature T

A

O

Soldering Temperature - - - +240 °C
Vibration Resistance 5Hz - 200Hz G - - 20 Gs

1

Shock Resistance 11±1ms,

/2 Sine Wave S - - 100 Gs

Weight - - 0.13 - grams/unit

(1)

Contact resistance measured with 4 terminal method, 1.1" between test leads

(2)

>1012 Ω is available upon request

(3)

A 24V zener in series with a diode across the coil

(4)

Use caution not to exceed vibration resistance limits while ultrasonically cleaning. Contact Clare Engineering for more details/recommendations

(5)

15 ampere turn minimum

- - 200 VDC

- - 500 mAmps

- - 1.5 Amps

9

10

11

- Ω

- - 0.5 ms

- - 0.2 ms

-40 - +125 °C

-40 - +125 °C

6

Ops

6

Ops

6

Ops

6

Ops

2

www.clare.com

Rev. 2