CPcam CP-NVR-8CH User Manual

Video Recorder User Manual

2016-3

1 Important Safeguards and Warnings

Electrical safety

All installation and operation should conform to your local electrical safety codes. We assume no liability or

responsibility for any fires or electrical shock caused by improper handling or installation.

Transportation security

Heavy stress, violent vibration or water splash should be avoided during transportation, storage and

installation.

Installation

Keep upright. Handle with care. Do not apply power to the NVR before completing installation. Do not place objects on top of the NVR

Qualified engineers needed

All examination and repair work should be done by qualified service engineers. We are not liable for any problems caused by unauthorised modifications or attempted repair.

Environment

The NVR should be installed in a cool, dry place away from direct sunlight and inflammable or explosive

substances, etc.

This product should be transported, stored and operated in the specified environments.

Accessories

Be sure to use all the accessories available in the package. Before installation, please open the package and check all the components are included. Contact your local retailer if something is broken or missing in your package.

Lithium battery

Improper battery use may result in fire, explosion, or personal injury. When replacing the battery, please make sure you use the same model.

2 Declaration

Please prevail in kind. The manual is for reference only. This manual may contain inaccurate data or printing error. The products described in this manual may be updated at any time. Screenshots of the manual is not in a machine and only for display. If in doubt, obtaining a copy of the latest procedure or the additional document, please contact with the company's after-sales department.

TABLE OF CONTENTS

1 Important Safeguards and Warnings ...................................................................................................................... 2

2 Declaration .............................................................................................................................................................. 3

3 Product Introduction ............................................................................................................................................... 1

3.1 Product Overview ......................................................................................................................................... 1

3.2 Feature .......................................................................................................................................................... 1

4 Read First ................................................................................................................................................................ 2

4.1 Front Panel ................................................................................................................................................... 2

4.2 Remote Control ............................................................................................................................................ 3

4.3 The Mouse .................................................................................................................................................... 5

4.4 The Input Method ......................................................................................................................................... 6

4.5 Icon ............................................................................................................................................................... 6

4.5.1The Screen Icons................................................................................................................................... 6

4.5.2Operation Icons .................................................................................................................................... 7

5 Installation .............................................................................................................................................................. 7

5.1 Unpacking Inspection ................................................................................................................................... 7

5.2 HDD Installation .......................................................................................................................................... 7

5.3 Installation of the burner .............................................................................................................................. 8

5.4 Alarm/PTZ/Control Keyboard Interface ...................................................................................................... 8

5.5 POE Connection ......................................................................................................................................... 10

6 Basic Operations Guide ......................................................................................................................................... 10

6.1 Power On and Off ...................................................................................................................................... 10

6.1.1Power On ............................................................................................................................................ 10

6.1.2Power Off (Shutdown) ........................................................................................................................ 11

6.1.3Restart ................................................................................................................................................ 11

6.1.4Power recovery .................................................................................................................................. 11

6.2 Start-up wizard ........................................................................................................................................... 11

6.3 Add Device ................................................................................................................................................. 13

6.3.1Channel Mode Switch ........................................................................................................................ 13

6.3.2QUICK ADD IP CAMERA ...................................................................................................................... 14

6.3.3Adding Menu ...................................................................................................................................... 15

6.3.4Automatically added .......................................................................................................................... 16

6.3.5Searching Added ................................................................................................................................. 17

6.3.6Modify channel configuration ............................................................................................................ 17

6.3.7Configure Front Device ....................................................................................................................... 17

6.3.8Delete Front Device ............................................................................................................................ 20

6.3.9Others ................................................................................................................................................. 20

6.4 The event of configuration ......................................................................................................................... 20

6.4.1Detect configuration........................................................................................................................... 20

6.4.2Intelligent analysis .............................................................................................................................. 22

6.4.3Alarm input......................................................................................................................................... 24

6.4.4Equipment Abnormal ......................................................................................................................... 26

6.5 Log in/Log out ............................................................................................................................................ 26

6.6 Preview ....................................................................................................................................................... 27

6.6.1Live Preview........................................................................................................................................ 27

6.6.2Channel Toolbar ................................................................................................................................. 28

6.6.3Right Click Menu ................................................................................................................................ 29

6.6.4Task Bar .............................................................................................................................................. 31

6.7 Search ......................................................................................................................................................... 33

6.7.1Search ................................................................................................................................................. 33

6.7.2Event Search ....................................................................................................................................... 36

6.7.3Tag Search........................................................................................................................................... 37

6.7.4Smart Serach ...................................................................................................................................... 37

6.7.5External Search ................................................................................................................................... 39

6.7.6Face search ......................................................................................................................................... 40

6.8 Record Backup ........................................................................................................................................... 40

7 local Configuration ................................................................................................................................................ 41

7.1 The Introduction of the Main Menu ........................................................................................................... 41

7.2 INFO .......................................................................................................................................................... 42

7.2.1[System]： .......................................................................................................................................... 43

7.2.2Event ................................................................................................................................................... 44

7.2.3Net Channel ........................................................................................................................................ 44

7.2.4LOG ..................................................................................................................................................... 46

7.3 CONFIG ..................................................................................................................................................... 46

7.3.1Channel Setting .................................................................................................................................. 46

7.3.2Storage ............................................................................................................................................... 48

7.3.3PTZ setting .......................................................................................................................................... 50

7.3.4Alarm .................................................................................................................................................. 51

7.3.5Channel Mode Switch ........................................................................................................................ 51

7.4 Backup........................................................................................................................................................ 51

7.5 Application ................................................................................................................................................. 51

7.5.1DDNS .................................................................................................................................................. 52

7.5.2Email ................................................................................................................................................... 53

7.5.3P2P ..................................................................................................................................................... 53

7.5.4Cloud storage ..................................................................................................................................... 54

7.5.5PUSH ................................................................................................................................................... 54

7.6 System setting ............................................................................................................................................ 54

7.6.1Basic setting........................................................................................................................................ 54

7.6.2Video output ...................................................................................................................................... 55

7.6.3Storage management ......................................................................................................................... 56

7.6.4ABNORMITY........................................................................................................................................ 58

7.6.5System Status ..................................................................................................................................... 58

7.6.6Maintain ............................................................................................................................................. 59

7.6.7Account .............................................................................................................................................. 61

7.6.8Network .............................................................................................................................................. 62

7.6.9RS232 .................................................................................................................................................. 65

8 WEB Access ........................................................................................................................................................... 65

8.1 WEB Operation .......................................................................................................................................... 65

8.1.1Network Connection .......................................................................................................................... 65

8.1.2The control installation and the user login logout ............................................................................. 66

8.1.3The Interface Of Web Operations ....................................................................................................... 67

8.1.4The Real-time Monitoring .................................................................................................................. 68

8.1.5PTZ Control ......................................................................................................................................... 69

8.1.6Configuration ...................................................................................................................................... 70

8.1.7Search Record ..................................................................................................................................... 71

8.1.8Alarm Configuration ........................................................................................................................... 72

8.1.9About .................................................................................................................................................. 72

9 Appendix ............................................................................................................................................................... 73

9.1 Alarm linkage setting ................................................................................................................................. 73

9.1.1Alarm Out ........................................................................................................................................... 73

9.1.2Linkage Record ................................................................................................................................... 73

9.1.3Snapshot ............................................................................................................................................. 74

9.1.4PTZ Linkage ......................................................................................................................................... 74

9.1.5Tour .................................................................................................................................................... 74

9.1.6Show Message .................................................................................................................................... 74

9.1.7Buzzer ................................................................................................................................................. 75

9.1.8Send Email .......................................................................................................................................... 75

9.1.9Server push......................................................................................................................................... 76

9.1.10 Send NetDisk ............................................................................................................................ 76

9.2 Port Mapping .............................................................................................................................................. 77

9.2.1UPNP Function ................................................................................................................................... 77

9.2.2Port mapping Manually ...................................................................................................................... 77

9.3 Voice Intercom ........................................................................................................................................... 78

9.3.1Summarize .......................................................................................................................................... 78

9.3.2Configuration ...................................................................................................................................... 78

9.4 HDD S.M.A.R.T ........................................................................................................................................ 78

9.5 Hard disk problem ...................................................................................................................................... 80

9.6 HDD Capacity Calculation ......................................................................................................................... 81

9.7 Terms .......................................................................................................................................................... 82

9.8 FAQ ............................................................................................................................................................ 82

3 Product Introduction

3.1 Product Overview

This series DVR/NVR is a high performance network video recorder, combined with H.264 video compression, high-capacity hard disk storage, TCP / IP transmission, embedded Linux operating system and a variety of other advanced technologies in the electronic information industry, all those ensure that a high-quality, low bit rate video storage characteristics, and good system stability. This product complies with GB 20815-2006 standard video security surveillance digital video recording promulgated by the State. At the same time, the product supports the ONVIF protocol” base on’ ONVIF ™ Core Specification’ Version 2.2” and is compatible with the network cameras which supports ONVIF protocol. Some of the products can enable the switching between the NVR mode and Hybrid mode “Hybrid mode supports

both analog cameras and network cameras, NVR mode only supports network cameras”. This series product

support local preview, multiple-window display, recorded file local storage, remote control and mouse shortcut menu operation, and remote management and control function. recording, playback, monitoring, synchronization of audio and video. Besides, the products support advanced control technology and strong network data transmission capacity.

3.2 Feature

Real-time monitoring

Have a composite video signal interface and support TV, VGA or HDMI output simultaneously.

Compression function

Use H.264 video compression standard and G.711 audio compression standard and have high definition, low code rate of the video coding and the storage.

Recording function

Support timing, linkage alarm, motion detection, SATA hard and local hard disk , DVR data backup and network backup.

Video playback function

Achieve searching videos by a variety of conditions, playback in local and network. Support multiple videos playback, fast playing, slow playing and frame-by-frame playback. Video playback can display the exact time of the incident. Provide time-line retrieving page for quick searching.

Camera control and alarm

Be controlled by the remote camera and equip many alarm input interfaces. Be connected to various types of alarm devices. Dynamic detection, video loss, video block, multiple alarm output and scene lighting control can be realized.

Communication Interface

Equip USB 2.0 high-speed interface or ESATA interface and allow many backup devices. Equip standard Ethernet interface. Plug and play in a variety of network conditions,

Network functions

Support TCP / IP, UDP, RTP / RTSP, DHCP, PPPOE, DDNS, NTP P2P etc. Support real-time network monitoring, video playback, control and management functions; built-in WEB Server, you can directly access through a

browser.

Operation Mode

Support various shortcut menu operation modes, on the front panel, remote control, mouse, etc；Support simple and intuitive GUI。

Intelligent analysis

Support One or Two channel Intelligent Video Analysis,，such as Face detection and perimeter analysis,Intelligent linkage pictures storage, videos, external alarm

Intelligent Search

Data can be retrieved through the intelligent analysis of data. Such as face detection data to achieve through face image search, or by perimeter realization event video analysis data retrieval。

Channel Switch

The simulating device compatible with IP channel by the TVR channel switch.

4 Read First

4.1 Front Panel

Name

Icon

Function

Power

Power button, press this button to boot up or shut down DVR/NVR.

Shift

1. In input Box, switch input methods;

2. Switch TAB;

Number Key

1~9

1. Number Input(in number mode);

2. English character Input(in English mode);

3. Switch channel (in 1-ch mode).

Input number more

than 10

+10

Enter a digital larger than 10, press two-digit number:

1. Press the tens digit;

2. Press digital switch button;

3. Press ones digit.

Up/Down

↑↓

1.Assistant function such as PTZ menu;

2.In monitor mode, switch between multiple-window and one-window;

3. Activate the digital input box increase or decrease the number;

4.Active pull-down menu to switch the drop-down box options;

5. Activate checkbox to change status;

6. Activate the text input box and step down carry and abdication;

7. Activate the control box to move the slider;

8. Activate display window to select the previous channel, next channel.

Left/Right

←-

1. Shift current activated control, and then move left and right;

2. In monitor mode, switch channel.

ESC

Go to previous menu, or cancel current operation.

Enter

ENTER

1. Confirm current operation;

2. Go to OK button;

3. Go to menu.

Function Key

Shortcut function with FN key.

Auxiliary

1. One-window monitor mode, click this button to display assistant function: PTZ control and image color;

2. Detection areas setting(like in motion detection setup), working with Fn and direction keys to realize setup;

3. In text mode, click it to delete the character before the caret(if there is no shift on the front panel, it can switch input methods), press this button for

1.5sec to clear all of the characters;

4. In playback mode, switch the full screen;

5. Realize other special functions.

Play/Pause

▶

1. Go to SEARCH interface;

2. In PTZ channel: ZOOM+;

3. In normal playback click this button to pause playback;

4. In pause mode, click this button to resume playback.

Shuttle(outer ring)

In real-time monitor mode it works as left/right direction key.

Jog(inner dial)

In real-time monitor mode it works as up/down direction key.

4.2 Remote Control

The remote control interface is shown as below:

1 2 3

Mult Add

5 6

8 9

-/--

ABC

DEF

GHI JKL MNO

PORS TUV WXYZ

Record

Enter/Menu

Esc

■

Multiple-

window Switch

Remote

Address

Number Key

Digital

switch

Auxiliary Key

Cancel

Loop Pause

Record

Confirm/Menu

Key

Direction Keys

Previous record/

Iris-

record/Iris+

Slow Play

Play/Pause

Forward

Forward 5sec

Reverse 5sec

Name

Icon

Function

Multiple-Window

Switch

Mult

Switch between multiple-window and one-window.

Remote Address

Add

Click it to input device number, so that you can control it.

Number Key

0~9

1.input numbers（in number mode）

2.input English character（in English mode）

3.switch channel（one-window mode）

Loop Pause

Pause the loop state.

Digital Switch

-/--

Enter a digital larger than 10, press two-digit number:

1. Press the tens digit;

2. Press digital switch button;

3. Press ones digit.

Record

1. Start or stop record manually.

2. In PTZ interface, click this button system can go to the Preset interface.

Auxiliary Key

1. One-window monitor mode, click this button to display assistant function: PTZ control and image color;

2. Detection areas setting(like in motion detection setup), working with Fn and direction keys to realize setup;

3. In text mode, click it to delete the character before the caret(if there is no shift on the front panel, it can switch input methods), press this button for

1.5sec to clear all of the characters;

4. In playback mode, switch the full screen;

5. Realize other special functions.

Confirm/Menu Key

Menu/Menu

1. Confirm current operation;

2. Go to OK button;

3. Go to menu.

ESC

Go to previous menu, or cancel current operation.

Direction Key

1.Assistant function such as PTZ menu;

2.In monitor mode, switch between multiple-window and one-window;

3. Activate the digital input box increase or decrease the number;

4.Active pull-down menu to switch the drop-down box options;

5. Activate checkbox to change status;

6. Activate the text input box and step down carry and abdication;

7. Activate the control box to move the slider;

8. Activate display window to select the previous channel, next channel.

1. Shift current activated control, and then move left and right;

2. In monitor mode, switch channel;

3.Assistant function such as PTZ menu.

Previous record/Iris-

1.In playback mode, playback the previous video;

2.In PTZ mode, Iris-.

Next record/Iris+

1.In playback mode, playback the next video;

2.In PTZ mode, Iris+.

Forward 5sec

In playback mode, forward 5sec.

Reverse 5sec

In playback mode, reverse 5sec.

Slow Play

Multiple slow play speeds or normal playback.

Forward

Various forward speeds and normal speed playback.

Stop

■

In normal playback click this button to stop playback.

Play/Pause

1. Go to SEARCH interface;

2. In PTZ channel: ZOOM+;

3. In normal playback click this button to pause playback;

4. In pause mode, click this button to resume playback.

The procedures of controlling multiple DVR by remote control:

The DVR ID default is 8. It’s no need to reset it when control one single DVR by the remote control. If you need

to control multiple DVR, do as below: First activate the remote control: choose controlled DVR, starts successfully, aim the remote control to control the hard disk video recorder, press the "Add" button, input device ID) between (1-999), then press ENTER to determine can control the corresponding number of hard disk video recorder.

4.3 The Mouse

In addition to front panel keys and remote control menu, the user can use a to control. Insert the mouse interface into the USB interface.

Left Click

Left click to enter the right menu or the main interface. Left click to access the menu option. Perform the operations instructions of the control. Change the state of the checkbox or dynamic detection blocks. Pop up a drop-down list when left click. In the state of PTZ 3D control, left drag the area to achieve regional enlarging or reducing.See details zoom effect

4.1.2 PTZ control section introduction.

Double Click

Double click to play video. Double click to make the screen full or exit.

Right Click

Right click to pop up the right menu in the real-time monitoring screen. Exit the current interface without saving.

Turning Wheel

Turn the mouse wheel to change the value in the digital box. Switch the option of the combination box. Scroll back and forth to achieve the zoom function of channels and PTZ 3D.

Mouse Move

Select controls of the current coordinates to move.

Mouse Drag

Select area to detect. Select area to shelter. Select zooming function of PTZ control.

4.4 The Input Method

capitalization and the input of Chinese. Click the mouse to complete the input.”← “represents the backspace and “_ “represents a space.

In the input box, you can select figures, symbols, English The input interface of English：

figures：

The input interface of Chinese：

4.5 Icon

4.5.1 The Screen Icons

：The channel is recording.

：The video of the channel is lost.

：Motion detection occurs.

：The channel is in monitoring and locked status.

：Adjust the size of the logo of the local audio output.

：Allow screens to round of the Tour.

4.5.2 Operation Icons

：Not selected.

：Be selected.

：The drop - down button

：Leave the interface. ：Cancel the settings. ：Set parameters. ：Save parameters. ：Restore the factory settings. ：Apply current settings to the system. ：Copy current settings to other channels. ：Enter the configuration interface. ：Select and configure the processing operation triggered by video detection or alarm.

5 Installation

5.1 Unpacking Inspection

When you receive the product, check according to the packing list in the box.

5.2 HDD Installation

Installation Preparation

Prepare a Cross Screwdriver.

Note: HDD quantity by each model’s specifications shall be final, HDD capacity up to 64 TB.

Steps

Remove the metal top cover by removing two screws from the sides of the cover. Place the hard disks on a flat table and tighten the screws. Connect the power and the data lines to the HDD. Reinstall the metal top cover and tighten the screws.

Caution

Only use the HDD specified by the manufacturer. The HDD will be formatted automatically during booting and it may cause data loss.

The total duration of video data saved is decided by the HDD’s capability and the DVR’s parameters (recording

setup, encoding setup). Please refer to the form in chapter 11.5.

5.3 Installation of the burner

Installation Preparation

Prepare a Cross Screwdriver.

Steps

Unscrew the screw on the side of the chassis and open the case cover. Use a screwdriver to remove the bracket fixed in middle of the disk. Open the front panel door and remove the baffle inside. Connect the burner data cable and the power cord. Fix the chassis cover.

Caution

The installation of the built-in burner is only for specific DVR and affects disk space for installation and interfaces.

5.4 Alarm/PTZ/Control Keyboard Interface

Alarm/PTZ/Control Keyboard Interface

2 4 6 8 2 4 10 12 14 16 1 3 5 7 1 3 B A 9 11 13 15

DOWN

1 3 2 4 1 2

Name

Instructions

Alarm Input

Connect the positive end (+) of the alarm input device to the

alarm input port (ALARM IN 1～16)

GND

Connect the negative end (-) of the alarm input device to the

ground

Alarm Output

Connect the alarm device

RS-485

485 communication port. They are used to control devices such

as PTZ. Please parallel connect 120TΩ between A/B cables if

there are too many PTZ decoders

Examples of alarm input connections

 Different models support different alarm input ports. Please refer to the specifications sheet for detailed

information.

 Slight difference may be found on the alarm port layout.

The alarm input is the switch quantity input. If the alarm input signal is not switch quantity signal but voltage signal, refer to the following connection:

Alarm Input

Devices

（Power

Output）

NVR

Alarm Switch Signal

ALM(+)

ALM(-)

Relay

Examples of alarm output connections

When the alarm output connect with DC and AC load, please refer to the connection.

NVR

Switch Signal Output

OUT

NVR

Switch Signal Output

Relay

See details 7.2.5.

The Connection of the P/T/Z

The A, B interface of the PTZ decoder connect with A and B interfaces of the DVR’s RS-485. 120Ω resistors should be paralleled in the remote A, B lines to reduce the distortion of the signal if a larger number of PTZs are connected. See details 7.2.4.

Keyboard The A, B interface of the Keyboard connect with A and B interfaces of the DVR’s RS-485,[MAIN MENU]-[CONFIGURATION]-[P/T/Z]，Protocol choose KEYBORAD. See below.

5.5 POE Connection

6 Basic Operations Guide

6.1 Power On and Off

6.1.1 Power On

Install the DVR/NVR correctly (as above) and then connect the power. The DVR/NVR LED should light up and the DVR/NVR will boot automatically. The DVR/NVR will then automatically detect any connected hardware (cameras, monitors, etc.), this process should last about 30 Seconds. When this process has been completed the DVR/NVR will enter the multi-screen real-time surveillance mode. If your hard drive is not properly connected, the following message will appear on your screen.

Note：Please do not use any type of power supply which is different from the power supply included in this

kit.

 Non-safe voltage 48V, please pay attention to electrical safety.Supply the NVR with the 12V DC power.  IP Camera should support the POE.  The theoretical distance of POE power supply should below 100 meters.

6.1.2 Power Off (Shutdown)

Right mouse click -[Main Menu]-[Shutdown]

Note: Only change or attempt to reconnect the hard disk drive after shutting down the DVR/NVR.

6.1.3 Restart

Right mouse click -[Main Menu]-[Shutdown]-[Restart system]

6.1.4 Power recovery

Reboot after an outage or forceful shutdown, DVR will save the record before outage and return to the normal operation mode.

6.2 Start-up wizard

Quickly configuration, including P2P account&password setting, network configuration, intelligent mode selection.

Help Information

[QR code]From left to right: Web access address, Android APP address, iphone APP address. [Network Connection Status]The current network status. [P2P]P2P account&password setting.

[Start-up wizard]Tick Start-up wizard Enable. Network configuration

[DHCP]Tick DHCP Enable. [IP address]Enter the number or press up&down button()to change the IP address and [Subnet Mask] and [Gateway]。 [First DNS Server]DNS server IP. [Alternate DNS Server]DNS alternate IP. [QR code]Scan it and shows P2P account, login with mobile APP.

Account

[Add Users] Add a new user [Modify User] Modify the user name, groups, rights [Add Group] to add a user group, and configure the user group right. [Modify Group] Modify the permissions belong to Group [Modify Password] Modify the Login password

Intelligent mode selection

[Intelligent mode selection]Intelligent mode selection.

6.3 Add Device

If the device supports IPC, should be added to IPC first. We offer three ways . And support different protocols.

6.3.1 Channel Mode Switch

Local channels compatibily with network by the channel mode switch.

1. Local channel switch network channel：

Click the start channel number，then the channel number switch the network channel(Contains the channel)，

click the[ok]，restart your device to complete the switch。\For example：2 channel choice network，as shown in the figure below，the 2-4 channel have switched the network channel

2. Network channel switch local channel：

Click the end channel number，then the channel number switch the local channel(Contains the channel)，click the[ok]，restart your device to complete the switch。 For example：2 channel choice local channel，as shown in the figure below，the 1-2 channel have switched the local channel

If the preview screen appears shown as follow image:

Then the channel does not match the resolution of the camera, Please enter in the [main menu] →

[Channel] →[mode switch] to configure the correct resolution

6.3.2 QUICK ADD IP CAMERA

In preview screen, move the mouse to the network channel, it will show "+" sign, left-click to enter the following Menu:

Seach add Click [Filter] to select the protocol

Click [Search] to search Click “+” to add deivce

Manual add

[Channels]Choose one channel. [Protocol]Choose protocol supported by the device.

[IP/ Domain Name] Input front device IP address or domain name. [Port]Input front device TCP port.

[Username] Input front device username. [Password] Input front device password. [Remote Detect]After completing the above settings, click detect button to check connection status. [Ping]Check whether the current network is to be connected. [Remote Channel]When the front device includes multiple channels, choose one channel for it.

Click “App” button to finish.

6.3.3 Adding Menu

The equipment with input function use network channel management page for add or delete the equipment and set

the front-end configuration. There are two ways to login[IP Channel] 1、Living preview，click the button below [ IP Channel] 2、[Main Menu]-[Channel]-[ IP Channel] Network channel management in the following page

[Check box]click the check channel,double click can deselect the check channel,Click the title bar to achieve selection, double click can deselect all .

[Serial number]Display the network channel number to add equipment serial number. [add、delete]click Delete the current network equipment.click add the network equipment. [status]Show the current channel connection status： Connection is normal， ID or Password is wrong， the

equipment is offline， User is lock。 [IP address/domain name]Display the equipment’s IP address/domain name.

[Port]Display the port number [Web Port]Display the web port number. [Agreement]Display the connection agreement. [Edit]Configure the channel information，show in6.3.6 [The front-end configuration]Configuration front camera’s parameters

We provide three ways to add device, automatically, searching,manually add the device.

6.3.4 Automatically added

No configuration, the device is automatically added. [Main Menu]-[Channel]-[IP Channel]-[Open UPNP]

Note：The device should support UPNP and should be in the same LAN.

6.3.5 Searching Added

Search all the IPC can be added via internet and then choose to add. To do the following. Enter[IP Channel] Click[Filter]to choose protocol Click[Search] Click+ to add device or Right click[Add to]choose the channel you want or tick the devices you want to add,then click[Group Add]。

6.3.6 Modify channel configuration

Enter [IP Channel].

Click “Edit ” button of device. Click “OK” button to finish.

6.3.7 Configure Front Device

Basic configuration, encoding configuration, snapshot, network and motion detection of front device can be set in NVR. Enter Net Channel Management menu. Click “Front Set ” button of device.

BASIC

[Channel Choose]Choose a channel. [Channel Name]Modify current channel name. [IPC Current Time]Set IPC tine. [Time Zone]Set time zone. [Time Sync]Enable IPC time sync with NVR.

[control IPC]Click the prompt whether restart the IPC，[OK]Restart the IPC，[Cancel]Return. Encoding

[Channels Choose]Choose one channel. [Audio coding]Select the current audio encoding [Code Level]H.264 [Resolution]choose main resolution and sub resolution. [Frame Rate] 1～25FPS/PAL,1～30FPS/NTSC [Bit Rate Control]Choose CBR or VBR. When choose CBR, bit rate can be set. When choose VBR, image

quality can be set.

[Picture Quailty]Choose the picture quailty by the Variable stream，there are 6 range to choose. [I frame interval]Set interval of adjacent frames. Max is 150. [Bit Rate]Choose 1280,1536,1792,2048,3072,4096,5120,6144,7168,8192 or set by yourself. Snapshot

[Choose Channel]Choose the channel to be modified. [Shopshot Mode]trigger the two mode of shopshot and timing shopshot,the timing shopshot that you must be

selected.

[Picture resolution]Set the captured picture resolution. [Picture Quailty]Choose the picture quailty，there are 6 range to choose.

[The frequency of highest shopshot]Support 1sec./pcs.~8sec./pcs 8 ranges of shopshot to choose. Network

[Channels Choose]Choose one channel. [IP Address][Subnet Mask][Gateway]Set IP address, subnet mark and gateway for the device. [First DNS Server]Set DNS server IP address. [Alternate DNS Server]Set standby DNS server IP address. [MAC/Serial] Show MAC address of front device.

Detection

[Channels Choose]Choose one channel. [Enable]Enable motion detect alarm or not. [Sensitivity]Set sensitivity level for motion detection. [Set Area] Set area for motion detection.22*18 area can be set.

:Make sure that protocol for front device supports motion detect function.All settings are for front device.

6.3.8 Delete Front Device

Enter Net Channel Management menu. Click Delete the equipment. Checkmark several device and click “Batch Delete” to finish delete.

6.3.9 Others

Right click in added device.

[Front Set] Reference 6.3.7 [Automatic Detection]Check connection status of the current channel.

[ShortCut PING] Check the current channel network whether is connected [Channel exchange]Exchange position of channels.

Right click device that hasn’t be add.

[ShortCut PING]Check the current equipment whether is connected [Add To]Add device

6.4 The event of configuration

The events is that the user had expected all the facts, the device can handle events types include: traditional alarm events, equipment abnormal events, intelligent analysis. Configure an event all by: the event type, rules, protection plan, linkage of four parts.

6.4.1 Detect configuration

The traditional alarm events，include video detection（motion detection、video loss、Video shade）and external alarms.

[main menu]-[Channel]-[Detect]Enter the configuration interface. Video detect

[Channel]Select a channel. [Alarm type]motion detection, video loss and video blind.

[Motion detection]detect the motion in the picture, and send alarm according to setting. [Video loss]detect the video loss and send alarm according to setting.

[Video blind]detect the video which was covered and send alarm according to setting. [Enable]control the alarm open and close [Sensitivity]highest, higher, middle, low, lower, lowest [Set area]there are totally 22*18=396 area can be set, which needs motion detection. [Process]Set the alarming time, linkage and the handling method.

[set linkage]show in the appendix 9.1 about set alarm linkage.

+ 62 hidden pages

CPcam CP-NVR-8CH User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual