CPcam CP507 Quick Start Manual
* Please read instructions thoroughly before operation and retai
* Please read instructions thoroughly before operation and retai
n it for future reference.
n it for future reference.
Make Sure Your Package Contains :
Make Sure Your Package Contains :
CP507 V0.97
1
1
1
1 Check Package Contents
2 Install HDD
3 Physical Connection
4 System Time Setup
5 Record & Playback
http://www.avc.com.hr
Digital Video System
Licensed Software AP
Adapter
Manual & Quick Start
IR Transmitter and
IR Receiver (1.5m)
16 / 8 CH MPEG
16 / 8 CH MPEG--
4 Network DVS
4 Network DVS
Accessories Packs
* 8
2
Physical Connection :
Physical Connection :
Install HDD :
Install HDD :
2
2
3
3
Carefully following the steps to ensure correct installation.
*** Note: If you want to install two HDDs, please set one HDD to “Master
Mode” or “Single Mode”, and the other one to “Slave Mode”. ***
For 16 channels
1) Open the upper cover of the DVR and screw out the bracket.
2) Screw HDD to the HDD bracket.
3) Connect the HDD to power connector and IDE BUS
(make sure to align the HDD precisely to the pin connection).
4) Close the upper cover of the DVR.
For detailed installation instructions, please refer to the user’s manual.
Loading...