1. Connect cameras and monitor to the DVS.
2. Shown below is an example of connecting the DVS to your existing Observation System.
3. Install HDD (The compatible HDD Brands are listed in the following table.)
Please refer to page 19. Appendix #1 for installation instructions.
*The HDD must be installed before turning on the DVS. If HDD is not installed, the DVS would function as a 4
CH multiplexer.
INSTALLATION GUIDE
INSTALLATION GUIDE
Before Operation
COMPATIBLE HARD DISK MODELS
4
Manufacturer Model Capacity Rotation
HITACHI Deskstar 180 GXP (120 GB) 120GB 7200 rpm
HITACHI Deskstar 7K250, HDS722516VLAT20
160GB
7200 rpm
HITACHI Deskstar 7K250, HDS722525VLAT80 250GB 7200 rpm
IBM Deskstar 120GXP (80GB) 80GB 7200 rpm
IBM Deskstar 120GXP (120GB) 120GB 7200 rpm
Maxtor DiamondMax 536DX(60GB) 4W060H4 60GB 5400 rpm
Maxtor DiamondMax Plus 9 80GB 7200 rpm
Maxtor DiamondMax Plus 9, Model#6Y120L 120GB 7200 rpm
Maxtor DiamondMax Plus 9, Model#6Y160L0 160GB 7200 rpm
Maxtor
MaxLine Plus Ⅱ, Model#7Y250P0
250GB 7200 rpm
Seagate Barracuda ATA IV, ST380021A 80GB 7200 rpm
Seagate Barracuda ATA V, ST3120023A 120GB 7200 rpm
Seagate Barracuda 7200.7 Plus, ST3160023A 160GB 7200 rpm
Western Digital Caviar WD1200BB-00CAA1 120GB 7200 rpm
Western Digital Caviar WD2000BB-00DWA0 200GB 7200 rpm
Western Digital CaviarSE WD2500JB 250GB 7200 rpm