Page 1
Manufacturers of Heating Equipment Since 1888
The patented COZY Gas-Fired, Direct Vent Baseboard
Heater is new and unique from any gas heater currently
offered! With high efficiency and state-of-the-art styling,
it is a perfect answer in the following heating applications
and installs on any outside wall:
• Retrofitting expensive electric baseboard heaters
(approximately 75% less operating cost).
• Single and multi-family dwellings, high-rise, commercial
and manufactured housing applications.
• Transitional entryways, under-window installations.
• Residential add-ons and sun porch applications.
• Cold-spots, or any application where space is at
a premium!
COZY gas-fired baseboard technology was developed
by three utility companies in Canada. They are eminently
reliable and safe. Cozy Baseboard Heaters are approved
for use in mobile home applications. Always consult
with your local building code officials.
FEATURES
INCLUDE:
■
Two models 5,000 BTU (4 Ft.) and 9,000 BTU (6 Ft.)
to choose from.
■
24 Volt thermostat (115 volt required).
■
Wall thermostat and power cord (9 Ft.) included.
■
Transistorized control module.
■
Tubular, aluminized combustion chamber warranted
for 10 years – no pro rata.
■
High efficient in-shot burner.
■
Standard vent fits any 4” – 16” outside wall application.
■
Sealed combustion, draws no room air and exhausts
unburned flue products to the outside.
■
Convenient direct spark igniter – standard.
■
Requires only a 2 1/2” wall opening.
■
Up to three (3) units may be operated in series on one
wall thermostat.
■
Flame proving, automatic draft induced control assures
maximum efficiency and safety.
■
Vent may be installed from the inside for multi-story
applications (See Vent Weather Seal Kit).
NEW
PATENTEDHEATING
TECHNOLOGY
www.cozyheaters.com
Page 2
Side Valve Concealer
4˝-16˝ Vent System (Standard)
Bottom Valve Concealer
STANDARD ITEMS OPTIONAL ACCESSORIES
1 Watt = 3.413 BTU
SPECIFICATIONS
Form No. BBT 20M 3/04
Standard Vent 1-1/2˝ Direct Spark Ignition
I.D. Seal Module Self-Diagnosing
Mounting Template, 24 Volt Wall T-Stat Kit, Power Cord
and Flex Connector with Ball Valve
Vent Weather Seal Kit with
2˝ I.D. Seal
Vent Riser Kit
NOTE: Conversion Kits are available for Nat or L.P. Gas (specify existing model no.)
Minimum
Model
Input Type Type Gas Center Wall Wall Max Wall Min Ship
No. BTU/Hr. Watts Gas Control AFUE Width Depth Height Conn. Voltage of Vent Opening Thickness Thickness Weight
to Floor
BBT53 5,000 1,465 Nat. 24 Volt 73.0% 48˝ 5-3/8˝ 9-3/8˝ 3/8˝ 115V 7-7/16˝ 2-1/2˝ 16˝ 4˝ 46 lbs
BBT54 5,000 1,465 L.P. 24 Volt 73.0% 48˝ 5-3/8˝ 9-3/8˝ 3/8˝ 115V 7-7/16˝ 2-1/2˝ 16˝ 4˝ 46 lbs
BBT103 9,000 2,930 Nat. 24 Volt 80.4% 72˝ 5-3/8˝ 9-3/8˝ 3/8˝ 115V 7˝ 2-1/2˝ 16˝ 4˝ 62 lbs
BBT104 9,000 2,930 L.P. 24 Volt 80.4% 72˝ 5-3/8˝ 9-3/8˝ 3/8˝ 115V 7˝ 2-1/2˝ 16˝ 4˝ 62 lbs
5,000 BTU
(Face Off)
48˝ (122 cm)
9,000 BTU
(Face Off)
72˝ (183 CM)
Inside Finish
Outside Finish
Loading...