Cox Wireless 4K Contour Stream Player User Manual

What you'll need What’s inside

TV FRONT

TV

Your original TV remote

Gateway

(Your Gateway may look different)

Quick start instructions,

Troubleshooting tips & FAQs

Power cordHDMI cable

Wireless 4K Contour Stream Player

Voice remote

520 -152 8-19 -0 8

FPO BARCODE

Quick start instructions

A

Plug in your Contour Stream Player

We recommend you use the new cables included in your kit.

1

First, make sure that your Gateway is installed and that the is internet working.

They both need to be up and running before continuing this installation.

Then, plug the blue end of the HDMI cable into the HDMI port on the back of

2

your Contour Stream Player and plug the other black end into the desired HDMI port

on your TV. Make note of which TV HDMI port you plug it into.

Lastly, connect the power cord into the power port on the back of your

3

Contour Stream Player and plug the other end into an electrical outlet. This will

power it on. Also make sure the electrical outlet isn't connected to a dimmer.

B

Start by turning on your TV.

Using the source or input button on your original TV remote, select the

HDMI connection that matches the HDMI port you plugged the cable into earlier.

You'll be prompted to follow on–screen instructions.

Then hang tight for a few minutes for the activation of your Contour box to finish.

3

C

2

Set up your Voice remoteActivate your Contour Stream Player

Simply follow the on-screen instructions to set up your new Voice remote.

When you see "All Set", press OK.

For help programming and troubleshooting your remote, visit Cox.com/remote-help.

For quick how-to videos, go to Cox.com/support. Check out the enclosed

troubleshooting tips and FAQs card for more information.

APP: Cox Connect
for 24/7 support
and helpful videos

WEB: Cox.com/support
and Cox.com/learn

CHAT: text an agent
at 54512 or live chat
on Cox.com/chat

CALL:
1-888-556-1193

520 -152 9-19 -0 8

FPO BARCODE