COVANA OASIS User Manual

INSTALLATION MANUAL TABLE OF CONTENTS 1
Revision 0 2019/02/18 C.A. 232857
2 TABLE OF CONTENTS USER MANUAL
TABLE OF CONTENTS
TABLE OF CONTENTS ............................................................................................................................................. 2
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW COVANA COVER.................................................. 3
SAFETY ...................................................................................................................................................................... 4
Safety information ................................................................................................................................................... 4
Avoiding the risk of electrocution ............................................................................................................................ 5
LABELING ................................................................................................................................................................. 6
GLOSSARY ................................................................................................................................................................ 9
QUICK START-UP INSTRUCTIONS .......................................................................................................................11
LED LIGHT KIT (OPTIONAL) ..................................................................................................................................12
MANUAL LIFTING PROCEDURE .......................................................................................................................13
WIRE GUARD REASSEMBLY (OPTIONAL) ..........................................................................................................14
WINTERIZING THE OASIS COVER ........................................................................................................................16
PERIODIC MAINTENANCE TABLE ........................................................................................................................17
TECHNICAL SPECIFICATIONS ..............................................................................................................................18
Side elevation .......................................................................................................................................................18
Frame and foot print .............................................................................................................................................19
Electrical specifications.........................................................................................................................................21
Operating limitations .............................................................................................................................................21
General specifications ..........................................................................................................................................21
TROUBLESHOOTING .............................................................................................................................................22
WARRANTY .............................................................................................................................................................24
APPENDIX ...............................................................................................................................................................27
Washing the OASIS cover ....................................................................................................................................27
Post greasing procedure.......................................................................................................................................28
Chain lubrification procedure ................................................................................................................................30
USER MANUAL CONGRATULATIONS 3
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW COVANA COVER
Thank you for choosing our product. The COVANA cover you have chosen is the result of excellent engineering, attention to detail and a great deal of pride. With proper care and attention, your COVANA cover will last many years and offer great performance.
Although our products are built to last, we strongly recommend that you register your COVANA cover at the time of purchase to ensure an adequate follow-up process.
In fact, registering your COVANA cover allows us to quickly reach you in the unlikely event a safety notice was to be issued. Your product and safety are a top priority for us at COVANA.
You will need your original sales receipt as proof of purchase to obtain warranty service and the work must be performed by an authorized technician. If your COVANA cover were ever to malfunction, your product registration will allow us to access necessary information in a timely manner.
Experience the benefits of registering your COVANA cover at www.covana.com/warranty.html.
Please take a few minutes to read all the instructions before you use your new COVANA cover. This user manual will explain how your cover works, so you will get the most from your COVANA cover for many years.
For service and advice, do not hesitate to call your local authorized COVANA dealer.
4 SAFETY USER MANUAL
SAFETY
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE SAFETY INSTRUCTIONS AND REVIEW THEM REGULARLY.
READ AND FOLLOW ALL INSTRUCTIONS
Safety information
The COVANA cover was designed, tested and certified to be installed over a residential hot tub (spa) and under important installation instructions issued by COVANA. Any other type of usage will void the warranty and product certification.
The extra load maximum weight provided in the specification section of this manual is a provision for environmental outcomes, such as some snow or damp leaves that could accumulate on the cover, that are evenly distributed on the surface of the cover.
The power safety cover meets ASTM F1346-91 requirements.
DANGER
To reduce the risk of injury, do not allow children
to use this product unless they are supervised at all times.
Failure to follow all instructions may result in
injury or even death.
Do not allow people to climb on the cover at any
time.
Do not allow children to have access to the
COVANA cover without supervision.
Never operate the COVANA cover until all people
and objects are out of the spa.
Lower the COVANA cover in extreme wind
conditions such as gusts of 30 mph (50 km/h) in the raised position and upwards of 45 mph (70km/h) when completely lowered on the hot tub.
WARNING
Be sure to keep the key switch and the key out of
the reach of children.
Do not put any type of fabric or plastic sheet, such
as a tarpaulin, on the COVANA cover. This could overheat the cover and result in deformation or melting of the cover.
Inspect the cover periodically. It should raise
smoothly and evenly. Contact your COVANA dealer if any unusual sound is heard during use.
Never use any type of pressure washer or buffer
to clean any surface of the COVANA cover. This could result in premature wear or damage.
The key switch must be permanently mounted
and located 5 ft. (1.5 m) away from the spa and 5 ft. (1.5 m) above the deck or ground level. Ensure the user has a clear view of the COVANA cover when operating it. Furthermore, the key switch terminal should be located in a place where no water downpour or debris could fall on it. (Figure
1)
DO Remove the control key after operating the
COVANA cover. Store the key in a secure location when not in use. Users must bring the control key in the hot tub with them to prevent unauthorized operation of the cover.
Never leave the key in the key switch. Check the cover frequently for signs of
deterioration.
Have any repairs, adjustments or mechanical
work performed by your authorized COVANA dealer as soon as possible should you notice a malfunction.
Close cover when not in use or if the hot tub is not
being monitored.
A COVANA cover should only be operated by an
adult.
This appliance can be used by children aged 8
years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge ONLY if they are supervised or have received instructions regarding safe use of the cover. Children must not play with the appliance. Cleaning and user maintenance must not be performed by children without supervision.
Figure 1
USER MANUAL SAFETY 5
DO NOT
Operate the unit before all mechanical and
electrical connections are completed.
Step on or stack anything on the COVANA
operator cover.
Operate the COVANA cover while somebody is in
the hot tub.
Climb, walk or stand on the COVANA cover at
any time.
Leave the COVANA cover open for more than 12
hours. This could cause the cover to warp over time.
Converge or directly reflect sunlight on the cover.
This could cause permanent damage.
Wash the cover with harsh chemicals or cleaners. Use a pressure washer to clean any component
of the COVANA cover. This could result in premature wear or damage.
Use an extension cord to connect the COVANA
cover to its power source. The cord may not be properly grounded, and the connection is a shock hazard. An extension cord may cause a voltage drop, which would cause the motor to overheat.
CAUTION
Be sure to follow all instructions in this manual
and use only COVANA-approved accessories and tools.
Do not roll the COVANA cover onto its side or
slide it on its side. This will damage the siding.
After removing any part, always place it in a safe
place on a clean and level surface to ensure proper functionality.
All four posts of the COVANA cover must be
properly anchored to the foundation using the anchoring holes located at the foot of each post. The optional non-permanent mounting plates can be used when anchoring is not possible, but under strict condition. See Non-permanent mounting plates installation section on Installation Manual for further details.
This product mainly contains steel, plastic,
copper (Cu) and die-cast aluminum (Al). The gearbox contains oil and other materials. Please recycle them properly.
Avoiding the risk of electrocution
ELECTRICAL DANGER
Failure to comply with these instructions may
result in death by electrocution or serious injury.
Disconnect or turn off and secure all power supplies before starting any intervention on the COVANA cover.
Always have a licensed electrical contractor
perform any electrical maintenance or repairs on the COVANA cover. The wiring must comply with all applicable local electrical codes and regulations.
The COVANA operator must be connected to a
circuit that is protected by a dedicated ground fault circuit interrupter (GFCI) that complies with all applicable local electrical codes and regulations.
Install the COVANA cover in such a way that
drainage directs water away from the electrical and base mechanical components.
Do not connect any auxiliary components to the
electrical system of the COVANA cover unless they have been approved by COVANA.
Replace electrical components with original
components provided or approved by COVANA. Ask your dealer for replacement parts.
To reduce the risk of electrical shock, replace all
damaged electrical cables immediately. Failure to do so may result in death or serious personal injury due to electrocution.
Do not bury any electrical cables. A buried cable
may result in death, or serious personal injury due to electrocution if direct burial-type cable is not used, or if improper digging occurs.
WARNING REGARDING DRUG OR
ALCOHOL USE
The use of drugs or alcohol while operating the
COVANA cover is strictly prohibited. The impairment of judgement, vision or hearing might affect the safety of other people or result in death.
WARNING REGARDING
MODIFICATIONS TO THE COVANA COVER
Any modifications to the COVANA cover, such as
mechanical, electrical or aesthetic ones, may cause the cover to operate in an unwanted or dangerous way. Furthermore, these modifications might void the warranty and certification.
The COVANA cover was designed, tested and
certified for the sole purpose of covering and securing a spa. Any installation that differs in whole or in part from this purpose will void the warranty and certifications.
SAVE THESE INSTRUCTIONS
6 LABELING USER MANUAL
LABELING
WARNING
Removing any labels from the COVANA cover will void product certification. All labels should always remain visible. It is the owners responsibility to ensure that these labels are always visible and should never be removed.
Risk of electrocution warning, located on the
operator unit.
Specification label, located on the operator.
(European model)
Note: This label provides the serial number.
Key operating diagram, located on the key switch.
Specification label, located on the operator unit.
(North American model)
Note: This label provides the serial number.
USER MANUAL LABELING 7
Key switch warning, located on the key switch
Electrical information, located on the key switch cable.
Do not step symbol, located on top of the operator unit.
8 LABELING USER MANUAL
The COVANA cover is labeled on four exterior
and interior wall faces. If the labels are damaged or no longer meet legibility requirements, please obtain replacement labels by contacting COVANA or your local COVANA dealer.
Drowning risk warning, found on the inside of the COVANA cover.
USER MANUAL GLOSSARY 9
GLOSSARY
Part
Figure
Function
All-weather seal
The all-weather seal will help protect sleeves from damage due to weather.
Corner bracket
The corner bracket links the cover to the sleeves.
Operator
The operator powers and controls the lifting mechanism of the COVANA cover.
Contour seal
The contour seal ensures uniform contact between the inner shell and the hot tub. It prevents excessive water and other contaminants from entering the spa. It also reduces heat loss.
Front frame cut­out
The front frame cut-out gets installed under the front step of your hot tub. It links the two non-motor-side posts.
Key switch
The key switch is used to operate the COVANA cover.
Figure 2
Figure 3
Figure 4
Figure 5
Figure 7
Figure 6
10 GLOSSARY USER MANUAL
Wire guard (optional)
The wire guard is an assembly that will house a wire that comes from the roof to light up the LED light kit on your OASIS cover. It protects the wire from becoming overly taut and will release extra wire if this happens.
CTS-70 (Continuous tension system)
(optional)
The CTS-70 is in the roof of the Oasis cover. It keeps the wire perfectly taut throughout the cover’s up and down cycle.
Sleeve
The sleeve is an aluminum case for the lifting mechanism.
Figure 8
Figure 9
Figure 10
Loading...
+ 22 hidden pages