Country Mate Technology CAHBTEP01 Users Manual

NS-CAHBTEP01_15-1223_QSG_V0_EN.ai 12/23/2015 15:54:25PM
NS-CAHBTEP01
Bluetooth Earpods
Bluetooth Earpods
USB charging cable Quick Setup Guide
1
RIGHT BACK LEFT
7
+
Volume Up
1
Next Track
MFB
(Power/talk/Play/
2
Pause/pairing) button
3 Indicator led Shows current status of the headphones.
-
Volume Down
4
Previous Track
5 Cable clamp
6 Micro USB port
7 Microphone
Method of use
1. Place Headphone on the neck, insure the same of length of both sides.
2. Place clip on collar which could be keep the Headphone wouldn’t be drop.
3. Wear the earpods, at that time the controller will nature hang front of right shoulder.
Press + to increase the volume. Press + to Skip to Next Track.
Press to turn on your stereo headphones. If you receive a phone call, press to talk. Press to turm off your stereo headphones .
Press - to decrease the volume. Press - to Previous Track.
The Cable clamp on the collar.
Plug the micro USB connector into this port to charge your headphones.
Allows you to talk on the telephone.
BT basic indication
Bluetooth Function Indication
Item
Operation LED Indication Tone
Power on Long press MFB more than 2s Blue LED on 1.5s "power on"
Power off Long press MFB more than 3s Red LED on 1.5s "power off"
Pairing mode
Play/Pause
Volume Up /Down
Next Track/ Previous Track
Incoming call
Answer call
Reset device list
Charging Indication
Charging /Connected USB cable
Full charging //
Low battery
Connect the charging cable to your stereo headphones
6
Micro USB port, then plug
the USB connector into your desktop computer, notebook or Smartphone AC adapter. The red LED stays on while your stereo headphones are charging and turns off when they are fully charged.
2
2 2
Long press MFB more than 4s on power off stage
Short press MFB button
2
Short press + / - button
1 4
Long press +/ - button
/
Short press MFB when have a calling
Long press MFB when have a calling
Long press MFB button more than 10s in power off stage
/
4
1
2
2
2
2
Red LED on
Red LED off
Blue LED blinking fast 3 times at every 1min
Blue and red LED blinking alternant
//
/
/
Blue LED blinking 3 times until pick up
/
/Reject call 1 long beeps tone
/Redial 2 short beeps toneDouble press MFB
All LED off then power off
2 short beeps tone
2 high beeps tone for max volume 2 low beeps tone for min volume
/
Some ring tone
1 short beeps tone
/
"battery low" at every 1 min
Press and hold the MFB button for two/three seconds . The LED blinks blue (when turned on) or red (when turned off), and the voice prompt says “Power on”, or “Power off.”
2
NS-CAHBTEP01_15-1223_QSG_V0_EN.ai 12/23/2015 15:54:25PM
Prompts you by saying “
Connected
,” when connected.
Device
With your stereo headphones turned off, press and hold
2
MFB
four seconds. The blue and red led blinking
alternant. On your phone or MP3 player, select
NS-CAHBTEP01
INSIGNIA
from the list of discovered devices, then enter the password
0000
(four zeros) (if required) to pair your headphones.
Refer to the computer’s
for
With the headphones turned off, press and hold
2
MFB for four seconds. The LED blinks blue and red led alternant, then pairing mode is activated.
Double-click the INSIGNIA NS-CAHBTEP01 icon on the computer or highlight the icon, then click Next. Note: If you are unable to locate the INSIGNIA NS-CAHBTEP01 icon, click the Search Again button.
INSIGNIA NS-CAHBTEP01 Hands-Free Unit icon or the INSIGNIA NS-CAHBTEP01 Stereo Audio icon.
turned off, press and hold
2
MFB for four seconds. The LED blinks blue and red led alternant, then pairing mode is activated.
INSIGNIA
Select
NS-CAHBTEP01 Continue
, then click
. The computer
gathers information.
Under
Input
, select
INSIGNIA NS-CAHBTEP01
Output
then under
, select
INSIGNIA NS-CAHBTEP01
To reset your headphones, With your stereo headphones turned off, press and hold
2
MFB
for
10 seconds.
Bluetooth version:
Bluetooth 4.1+EDR
Supported profiles:
A2DP, AVRCP, HFP, HSP
Frequency spectrum:
2.4 ~ 2.4835 GHz ISM Band
Working distance:
Up to 33 ft. (10 m)
Operating temperature:
23 ~ 122° F (-5 ~ 50° C)
Operating time:
Talk: 6 hours; music: 6 hours, playback music track
Standby time:
200Hours
Size:
Ear shell
0.67 x 0.68 x 1.26 inches (1.7 x 1.72 x 3.2 cm)
Mic controller
2.2 x 0.41 x 0.31 inches (5.6 x 1.05 x 0.8 cm)
Overall length
31.5 inches (80 cm)
Weight:
0.423 oz(12g)
Average charging time:
2Hours
FCC ID:MV3-CAHBTEP01 FCC statement:
This device complies with Part
,
15 of the FCC Rules. Operation is subject to the following two
.
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation." (Or in manual if product too small)
FCC Caution:
Changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help."
Made in China
V0 ENGLISH 15-1223